142
Seat beltsThe force limiter reduces the pressure
of the seat belt against the body of the
o c c u p a n t s . T h e e q u i p m e n t i t t e d t o
these seat belts is operational when
the ignition is switched on.
T h e i n e r t i a r e e l s a r e i t t e d w i t h a d e v i c e
which automatically locks the strap in
the event of a collision or emergency
braking.
You can release the seat belt and allow
the strap to roll up. Do not invert the seat belt buckles as
t h e y w i l l n o t f u l i l t h e i r r o l e c o m p l e t e l y .
I f t h e s e a t s a r e i t t e d w i t h a r m r e s t s , t h e
lap part of the seat belt should always
pass under the armrest.
Check that the seat belt is fastened
c o r r e c t l y b y p u l l i n g t h e s t r a p i r m l y .
Good practice
Wherever you are seated in the
vehicle, always fasten your seat belt,
even for short journeys.
T h e s e a t b e l t s a r e i t t e d w i t h a n i n e r t i a
reel which automatically adjusts the
length of the strap to your size. The
seat belt is rolled up automatically
when not in use.
Ensure that the seat belt is rolled up
correctly after use.
After folding or moving a rear seat or
bench seat, ensure that the seat belt is
rolled up correctly in its compartment
and that the buckle is ready to
accommodate the tongue.
Depending on the nature and
seriousness of any impact, the
pretensioning device may be triggered
b e f o r e a n d i n d e p e n d e n t l y o f i n l a t i o n
of the air bags. It instantly tightens
the seat belts against the body of
the occupants. Triggering of the
pretensioners is accompanied by a
slight discharge of harmless smoke
and a noise, due to the activation of
the pyrotechnic cartridge incorporated
in the system.
To install the seat belt, move the
tongue into position to insert it into the
buckle.
Row 2 and 3 rear centre
seat belts
The row 2 rear centre seat and the
rear bench seat centre seat have an
integrated three-point inertia reel seat
belt.
The air bag warning light comes on
if the pretensioners are triggered.
Consult a PEUGEOT dealer.
In order to be effective, a seat belt
must:
- restrain one person only,
- must not be twisted, check by pulling in front of you with an even
movement,
- be tightened as close to the body as possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as possible on the pelvis. Recommendations for children:
- use a suitable child seat if the
passenger is less than 12 years old
o r s h o r t e r t h a n o n e m e t r e i f t y ,
- never allow a child to travel on your lap, even with the seat belt
fastened.
For further information regarding child
seats, refer to the "Children on board"
section of chapter 5.
In accordance with current safety
regulations, your PEUGEOT dealer
guarantees all work or any checks,
from testing to maintenance, on your
seat belt equipment.
Have the seat belts checked regularly
(even after a minor impact) by a
PEUGEOT dealer: they must not show
any signs of wear, cutting or fraying
and they must not be transformed or
m o d i i e d .
Clean the seat belt straps with soapy
water or a textile cleaning product, sold
by PEUGEOT dealers.
185
Petrol and Diesel technical data
TECHNICAL DATA
9
PETROL DIMENSIONS, WEIGHTS AND TOWING LOADS (in mm - in kg)
Model codes
EARFJ__ EBRFJ__ 7 seats 8 seats
manual auto manual auto
Engines2.0 PETROL
Wheelbase(s) (at full load)2 823
on Axle 11 570
on Axle 21 548
Length4 727
Width 1 850
Height at kerb weight
without roof bars
1 745 to 1 759
w i t h i x e d r o o f b a r s1 854 to 1 863
Kerb weight1 738 to 1 825 1 766 to 1 863 1 706 to 1 875 1 734 to 1 904
on Axle 11 018 to 1 043 1 046 to 1 081 1 014 to 1 060 1 044 to 1 090
on Axle 2720 to 782 720 to 782 692 to 815 690 to 814
E n g i n e s ( w i t h i l t e r r e p l a c e m e n t )
189
Petrol and Diesel technical data
TECHNICAL DATA
9
DIESEL DIMENSIONS, WEIGHTS AND TOWING LOADS
(in mm - in kg)
Model codes EARHKH EBRHKH EARHRH EBRHRH EA4HTH
EA4HPH EB4HTH
EB4HPH
7 seats 8 seats 7 seats 8 seats 7 seats 8 seats
Engines 2.0 HDi 2.0 HDi PEF 2.2 HDi PEF
Wheelbase(s) (at full load) 2 823
on Axle 1 1 570
on Axle 2 1 548
Length 4 727
Width 1 850
Height at kerb weight
without roof bars 1 745 to 1 759
w i t h i x e d r o o f b a r s 1 854 to 1 863
Kerb weight
1 846 to 1 949 1 811 to 1 976 1 854 to 1 957 1 818 to 1 983 1 902 to 1 988 1 875 to 2 017
on Axle 11 117 to 1 153 1 114 to 1 158 1 121 to 1 157 1 117 to 1 161 1 170 to 1 204 1 169 to 1 217
on Axle 2 729 to 796 697 to 818 733 to 800 701 to 822 732 to 784 696 to 800
