2008 Peugeot 308 SW BL Owner's Manual

46
MULTIFUNCTION DISPLAYS
Defi ne the vehicle parameters
Once the "Defi ne the vehicle parame-
ters" menu has been selected, you can
activate or deactivate certain driving
and comfort equipment:
- selective unlocking (refer to the "Ac-cess" section),
- wiper linked with reverse gear (refer to the "Visibility" section),
- follow-me-home and welcome light- ing (refer to the "Visibility" section),
- ambient lighting (refer to the "Visibility" section),
- daytime lights (refer to the "Visibility" section),
- directional headlamps (refer to the "Visibility" section). Example: setting the duration of the follow-
me-home lighting

 Turn the navigator to select the

"Lighting confi guration" menu,
then press the navigator to confi rm.

 Select the line "Duration of follow-
me-home lighting" then confi rm.
"Configuration" menu Once this menu has been selected,
you can gain access to the following
functions:

 Select the duration then press the
navigator.

 Turn the navigator to set the value
required (15, 30 or 60 seconds),
then press the navigator.

 Select the "OK" box, then confi rm.

 Press the "MENU" button on the
RT4 GPS audio/telephone to gain
access to the general menu .

 Turn the navigator to select the

"Confi guration" menu, then press
the navigator to confi rm.

!
47
MULTIFUNCTION DISPLAYS
For safety reasons, it is imperative
that confi guration of the multifunc-
tion displays by the driver takes
place when stationary.
Once the "Display confi guration" menu
has been selected, you gain access to
the following parameters:
- selection of the palette of colours
available for the display,
- setting of the brightness and bril- liance of the display,
- setting of the date and time (12 or 24 hour mode, adjustment of the
minutes on GPS),
- selection of the units (temperature in °Celsius or °Fahrenheit; consump-
tion in l/100 km or mpg or km/l).
Display confi guration
Selecting the the language
Sounds
Once the "Sounds" menu has been se-
lected, you gain access to the following
parameters:
- setting of the voice commands,
- setting of the voice synthesiser (volume, male or female),
-
activation of the auxiliary input AUX.
Once the "Language selection" menu
has been selected, you gain access to
the following parameters:
- selection of the display language (Français, English, Italiano, Portugues,
Espanol, Deutsch, Nederlands),
- selection of the language used for the information and voice commands
(Français, English, Italiano, Portugues,
Espanol, Deutsch, Nederlands).

48
MULTIFUNCTION DISPLAYS
Warnings log
This summarises the active warning
messages, displaying them in succes-
sion on the multifunction display.
"Vehicle diagnostics"
menu

 Press the "MENU" button to gain
access to the general menu.

 Turn the navigator and press it to
select the "Vehicle diagnostics"
menu.
 On the "Vehicle diagnostics" menu,
select one of the following applica-
tions:
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.

49
MULTIFUNCTION DISPLAYS
TRIP COMPUTER

 Press the button, located at the end
of the wipers stalk , to display the
various items of trip computer data
in succession. The trip computer data is the following:
System which provides current infor-
mation concerning the route travelled
(range, consumption, ...).

 Press the control for more than
two seconds to reset the distance
travelled, the average consumption
and the average speed to zero.
Monochrome display A
Zero reset
Data displays - the range,
- the current consumption,
- the distance travelled,
- the average consumption,
- the average speed.
 The next press then returns you to
the normal display.

!
i
i
51
MULTIFUNCTION DISPLAYS
A few definitions…
When the range falls below 20 miles
(30 km), dashes are displayed. After fi ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer. This function is only displayed from
20 mph (30 km/h).
This fi gure may increase following
a change in the style of driving or
the relief, resulting in a signifi cant
change in the current consumption.
Range
(km or miles)
This indicates the distance
which can still be travelled
with the fuel remaining in the tank in
relation to the average consumption
over the last few miles (kilometres) trav-
elled. Current consumption
(l/100 km or km/l or mpg)
This is the average quantity of
fuel consumed during the last
few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quantity
of fuel consumed since the
last trip computer zero reset.
Average speed
(km/h or mph)
This is the average speed
calculated since the last trip
computer zero reset (igni-
tion on).
Distance travelled
(km or miles)
This indicates the distance
travelled since the last trip
computer zero reset. Distance remaining to
destination
(km or miles)
This is the distance remaining to be trav-
elled to the fi nal destination. It is either
calculated instantly by the navigation sys-
tem, if guidance is activated, or entered
by the user.
If the distance is not entered, dashes
are displayed in place of the digits.

i
50
MULTIFUNCTION DISPLAYS - the current information tab with:

!
i
i
51
MULTIFUNCTION DISPLAYS
A few definitions…
When the range falls below 20 miles
(30 km), dashes are displayed. After fi ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer. This function is only displayed from
20 mph (30 km/h).
This fi gure may increase following
a change in the style of driving or
the relief, resulting in a signifi cant
change in the current consumption.
Range
(km or miles)
This indicates the distance
which can still be travelled
with the fuel remaining in the tank in
relation to the average consumption
over the last few miles (kilometres) trav-
elled. Current consumption
(l/100 km or km/l or mpg)
This is the average quantity of
fuel consumed during the last
few seconds.
Average consumption
(l/100 km or km/l or mpg)
This is the average quantity
of fuel consumed since the
last trip computer zero reset.
Average speed
(km/h or mph)
This is the average speed
calculated since the last trip
computer zero reset (igni-
tion on).
Distance travelled
(km or miles)
This indicates the distance
travelled since the last trip
computer zero reset. Distance remaining to
destination
(km or miles)
This is the distance remaining to be trav-
elled to the fi nal destination. It is either
calculated instantly by the navigation sys-
tem, if guidance is activated, or entered
by the user.
If the distance is not entered, dashes
are displayed in place of the digits.

52
COMFORT
VENTILATION
System which creates and maintains
comfortable conditions in the vehicle’s
passenger compartment. Air treatment
The incoming air follows various routes
depending on the controls selected by
the driver:
- direct arrival in the passenger
compartment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning).
The temperature control enables you to
obtain the level of comfort required by
mixing the air of the various circuits. The air distribution control enables you
to diffuse the air in the passenger com-
partment combining several air vents.
The air fl ow control enables you to in-
crease or reduce the speed of the ven-
tilation blower.
Air intake
The air circulating in the passenger com-
partment is fi ltered and originates either
from the outside via the grille located at
the base of the windscreen or from the
inside in air recirculation mode. Control panel
The controls of this system are grouped
together on control panel
A on the cen-
tre console. Depending on the model,
the functions offered are:
- the level of comfort required,
- the air fl ow,
- the air distribution,
- the de-icing and demisting,
- the manual or automatic air condi- tioning controls.
Air diffusion

1. Windscreen de-icing or demisting
vents.

2. Front side window de-icing or
demisting vents.

3. Side adjustable and closing vents.

4. Central adjustable and closing
vents.

5. Air outlets to the front footwells.

6. Adjustable and closing vents for the
rear passengers.

7. Air outlets to the rear footwells.