2008 PEUGEOT 308 CC bulb
[x] Cancel search: bulbPage 83 of 221
5
ii
80
VISIBILITY
Exterior welcome lighting
The remote switching on of the lights
and lateral lights makes your approach
to the vehicle easier in poor light when
in automatic switching on of the lights
mode.
Switching on
Press the open padlock on the remote
control.
The dipped headlamps and the side lights come on, as well as the lateral
lights, located in the exterior mirrors;
your vehicle is also unlocked.
Switching off
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.
Programming The duration of maintaining
of the lighting is selected
via the multifunction dis-
p l a y c o n fi g u r a t i o n m e n u .
The duration of the welcome light-
ing is associated with and identical
to that of the automatic follow-me-
home lighting. MANUAL ADJUSTMENT OF THE HEADLAMPS
Initial setting is position "0".
To avoid dazzling other road users, the
height of the halogen bulb headlamps
must be adjusted according to the load
in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 4 people.
-. Intermediate setting.
2. 4 people + maximum authorised
loads.
-. Intermediate setting.
3. Driver + maximum authorised loads.
Page 85 of 221
5
ii
80
VISIBILITY
Exterior welcome lighting
The remote switching on of the lights
and lateral lights makes your approach
to the vehicle easier in poor light when
in automatic switching on of the lights
mode.
Switching on
Press the open padlock on the remote
control.
The dipped headlamps and the side lights come on, as well as the lateral
lights, located in the exterior mirrors;
your vehicle is also unlocked.
Switching off
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.
Programming The duration of maintaining
of the lighting is selected
via the multifunction dis-
p l a y c o n fi g u r a t i o n m e n u .
The duration of the welcome light-
ing is associated with and identical
to that of the automatic follow-me-
home lighting. MANUAL ADJUSTMENT OF THE HEADLAMPS
Initial setting is position "0".
To avoid dazzling other road users, the
height of the halogen bulb headlamps
must be adjusted according to the load
in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 4 people.
-. Intermediate setting.
2. 4 people + maximum authorised
loads.
-. Intermediate setting.
3. Driver + maximum authorised loads.
Page 86 of 221
5
ii
80
VISIBILITY
Exterior welcome lighting
The remote switching on of the lights
and lateral lights makes your approach
to the vehicle easier in poor light when
in automatic switching on of the lights
mode.
Switching on
Press the open padlock on the remote
control.
The dipped headlamps and the side lights come on, as well as the lateral
lights, located in the exterior mirrors;
your vehicle is also unlocked.
Switching off
The exterior welcome lighting switches
off automatically after a set time, when
the ignition is switched on or on locking
the vehicle.
Programming The duration of maintaining
of the lighting is selected
via the multifunction dis-
p l a y c o n fi g u r a t i o n m e n u .
The duration of the welcome light-
ing is associated with and identical
to that of the automatic follow-me-
home lighting. MANUAL ADJUSTMENT OF THE HEADLAMPS
Initial setting is position "0".
To avoid dazzling other road users, the
height of the halogen bulb headlamps
must be adjusted according to the load
in the vehicle.
0. 1 or 2 people in the front seats.
-. 3 people.
1. 4 people.
-. Intermediate setting.
2. 4 people + maximum authorised
loads.
-. Intermediate setting.
3. Driver + maximum authorised loads.
Page 149 of 221
10
i
!
!
136
PRACTICAL INFORMATION
Risk of electrocution
Xenon bulbs (D1S-35 W) must be
r e p l a c e d b y a P E U G E O T d e a l e r .
CHANGING A BULB
Procedure for replacing a faulty bulb with
a n e w b u l b w i t h o u t t h e u s e o f t o o l s .
Front lights
Model with halogen lights
1. Direction indicators
(PY 21 W amber).
2. Dipped headlamps (H7 - 55 W).
3. Main beam headlamps (H1 - 55 W).
4. Daytime/side lights (P21/5 W).
5. Fog lamps (H8 - 35 W).
1. Direction indicators
(PY 21 W SV silver).
2. Dipped/main beam headlamps
(D1S-35 W).
3. Additional main beam
headlamps (H1-55 W).
4. Daytime/side lights (P 21/5 W).
5. Fog lamps (H8-35 W).
Model with xenon lights and
directional headlamps
I n c e r t a i n c l i m a t i c c o n d i t i o n s ( l o w
temperature, humidity), the pre-
sence of condensation on the
inside of the headlamp and light
glass is normal ; it disappears
a few minutes after the lights are
s w i t c h e d o n .
Handle the bulbs using a dry
c l o t h .
T h e h e a d l a m p s a r e fi t t e d w i t h p o l y -
carbonate lenses, coated with a
p r o t e c t i v e v a r n i s h :
do not clean them with a dry
or abrasive cloth or using a
detergent or solvent product,
use a sponge and soapy water,
when using a high pressure
washer on stubborn dirt, do not
spend too long on the head-
lamps, lights and their surrounds
t o a v o i d d a m a g i n g t h e i r v a r n i s h
a n d t h e i r s e a l s .
Page 150 of 221
10
i
!
137
PRACTICAL INFORMATION
Changing main beam headlamp bulbs
R e m o v e t h e p r o t e c t i v e p l a s t i c c o v e r
b y p u l l i n g o n t h e t a b .
D i s c o n n e c t t h e b u l b c o n n e c t o r .
Compress the springs to release the
b u l b .
R e m o v e t h e b u l b a n d c h a n g e i t
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Changing daytime/side light bulbs
R e m o v e t h e p r o t e c t i v e p l a s t i c c o v e r
b y p u l l i n g o n t h e t a b .
D i s c o n n e c t t h e b u l b c o n n e c t o r .
Turn the bulb holder a quarter of a
t u r n a n d e x t r a c t i t .
P u l l t h e b u l b a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n
r e v e r s e o r d e r .
Changing direction indicator bulbs
A m b e r o r s i l v e r c o l o u r e d b u l b s ,
such as the direction indicators,
must be replaced with bulbs of
i d e n t i c a l s p e c i fi c a t i o n s a n d c o l o u r .
Turn the bulb holder a quarter of a
t u r n a n d e x t r a c t i t .
P u l l t h e b u l b a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n
r e v e r s e o r d e r .
W h e n r e fi t t i n g , c l o s e t h e p l a s t i c
c o v e r c a r e f u l l y t o g u a r a n t e e t h e
s e a l i n g o f t h e h e a d l a m p . Changing dipped headlamp bulbs
R e m o v e t h e p r o t e c t i v e p l a s t i c c o v e r
b y p u l l i n g o n t h e t a b .
D i s c o n n e c t t h e b u l b c o n n e c t o r .
Compress the springs to release the
b u l b .
E x t r a c t t h e b u l b a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n r e -
v e r s e o r d e r .
Page 151 of 221
10
138
PRACTICAL INFORMATION
Changing integrated direction
indicator side repeaters
I n s e r t a s c r e w d r i v e r t o w a r d s t h e
centre of the repeater between the
r e p e a t e r a n d t h e b a s e o f t h e m i r r o r .
T i l t t h e s c r e w d r i v e r t o e x t r a c t t h e r e -
p e a t e r a n d r e m o v e i t .
D i s c o n n e c t t h e r e p e a t e r c o n n e c t o r .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n
r e v e r s e o r d e r .
Contact a PEUGEOT dealer to obtain
r e p l a c e m e n t r e p e a t e r s . Changing fog lamp bulbs
To replace these bulbs consult a
P E U G E O T d e a l e r .
Changing the lateral lights
For the replacement of this type of diodes
b u l b , c o n t a c t a P E U G E O T d e a l e r .
Page 152 of 221
10
!
139
PRACTICAL INFORMATION
Rear lights
1. Brake lights (diodes).
2. Side lights (diodes).
3. Direction indicators (diodes).
4. Fog lamp (P21 W).
5. Reversing light (P21 W). Changing the fog lamp and
reversing light
These two bulbs are changed from out-
s i d e t h e r e a r b u m p e r :
On the left-hand side, take care not
to touch the silencer; risk of burns, if
you change the bulb after switching
o f f t h e i g n i t i o n .
turn the bulb holder one quarter of a
t u r n a n d r e m o v e i t ,
turn the bulb one quarter of a turn
a n d c h a n g e i t .
T o r e fi t , c a r r y o u t t h e s e o p e r a t i o n s i n
r e v e r s e o r d e r .
Changing brake lights, side lights
and direction indicators
For the replacement of this type of diodes
l i g h t , c o n t a c t a P E U G E O T d e a l e r .
Page 153 of 221
10
!
140
PRACTICAL INFORMATION
Changing the third brake light
(diodes)
For the replacement of this type of diodes
l i g h t , c o n t a c t a P E U G E O T d e a l e r . Changing the number plate light
bulbs (W 5 W)
I n s e r t a t h i n s c r e w d r i v e r i n o n e o f
t h e e x t e r i o r h o l e s o f t h e l e n s .
Push it towards the outside to unclip
i t .
R e m o v e t h e l e n s .
P u l l t h e b u l b a n d c h a n g e i t .
High pressure washing
When using this type of washing
on stubborn dirt, do not persist on
the headlamps, the lights and their
s u r r o u n d s t o a v o i d d a m a g i n g t h e i r
v a r n i s h a n d t h e i r s e a l .