2008 PEUGEOT 308 CC DAG ignition
[x] Cancel search: ignitionPage 161 of 221
10
!
!
i
148
PRACTICAL INFORMATION
Do not disconnect the terminals
w h i l e t h e e n g i n e i s r u n n i n g .
Do not charge the batteries without
d i s c o n n e c t i n g t h e t e r m i n a l s fi r s t .
T h e b a t t e r i e s c o n t a i n h a r m f u l s u b -
stances such as sulphuric acid and
l e a d . T h e y m u s t b e d i s p o s e d o f i n
accordance with regulations and
must not, in any circumstances, be
d i s c a r d e d w i t h h o u s e h o l d w a s t e .
Take used remote control batteries
a n d v e h i c l e b a t t e r i e s t o a s p e c i a l
c o l l e c t i o n p o i n t .
Charging the battery using a
battery charger
D i s c o n n e c t t h e b a t t e r y f r o m t h e v e h i c l e .
F o l l o w t h e i n s t r u c t i o n s f o r u s e p r o -
v i d e d b y t h e m a n u f a c t u r e r o f t h e
c h a r g e r .
R e c o n n e c t s t a r t i n g w i t h t h e n e g a -
t i v e t e r m i n a l ( - ) .
Check that the terminals and
c o n n e c t o r s a r e c l e a n . I f t h e y a r e
c o v e r e d w i t h s u l p h a t e ( w h i t i s h o r
g r e e n i s h d e p o s i t ) , r e m o v e t h e m a n d
c l e a n t h e m .
A t t h e r i s k o f d i s c h a r g i n g t h e b a t -
t e r y , t h e d e a c t i v a t e d f u n c t i o n s c a n
b e r e a c t i v a t e d m a n u a l l y .
LOAD REDUCTION MODE
System which manages the use of certain
f u n c t i o n s i n r e l a t i o n t o t h e l e v e l o f c h a r g e r e -
m a i n i n g i n t h e b a t t e r y .
W h e n t h e v e h i c l e i s b e i n g d r i v e n , t h e l o a d
r e d u c t i o n f u n c t i o n t e m p o r a r i l y d e a c t i v a t e s
c e r t a i n f u n c t i o n s , s u c h a s t h e a i r c o n d i -
tioning, the neck heaters, the rear screen
d e - i c i n g . . .
T h e d e a c t i v a t e d f u n c t i o n s a r e r e a c t i v a t e d
a u t o m a t i c a l l y a s s o o n a s c o n d i t i o n s p e r m i t .
I t i s a d v i s a b l e t o d i s c o n n e c t t h e
b a t t e r y i f t h e v e h i c l e i s t o b e l e f t u n -
u s e d f o r m o r e t h a n o n e m o n t h . Before disconnecting the
battery
Wait 2 minutes after switching off
the ignition before disconnecting
t h e b a t t e r y .
Close the roof, the windows and
the doors before disconnecting the
b a t t e r y .
Following reconnection of the
battery
F o l l o w i n g r e c o n n e c t i o n o f t h e b a t -
tery, switch on the ignition and wait
1 minute before starting to permit
i n i t i a l i s a t i o n o f t h e e l e c t r o n i c s y s -
t e m s . H o w e v e r , i f s l i g h t d i f fi c u l t i e s
a r e e n c o u n t e r e d f o l l o w i n g t h i s o p e r -
a t i o n , c o n t a c t a P E U G E O T d e a l e r .
R e f e r r i n g t o t h e c o r r e s p o n d i n g s e c -
t i o n , y o u m u s t y o u r s e l f r e i n i t i a l i s e :
- t h e r e m o t e c o n t r o l k e y ,
- t h e e l e c t r i c w i n d o w s a n d t h e
automatic partial opening of the
door windows,
- t h e G P S s a t e l l i t e n a v i g a t i o n s y s t e m .
Page 162 of 221
10
!
!
i
148
PRACTICAL INFORMATION
Do not disconnect the terminals
w h i l e t h e e n g i n e i s r u n n i n g .
Do not charge the batteries without
d i s c o n n e c t i n g t h e t e r m i n a l s fi r s t .
T h e b a t t e r i e s c o n t a i n h a r m f u l s u b -
stances such as sulphuric acid and
l e a d . T h e y m u s t b e d i s p o s e d o f i n
accordance with regulations and
must not, in any circumstances, be
d i s c a r d e d w i t h h o u s e h o l d w a s t e .
Take used remote control batteries
a n d v e h i c l e b a t t e r i e s t o a s p e c i a l
c o l l e c t i o n p o i n t .
Charging the battery using a
battery charger
D i s c o n n e c t t h e b a t t e r y f r o m t h e v e h i c l e .
F o l l o w t h e i n s t r u c t i o n s f o r u s e p r o -
v i d e d b y t h e m a n u f a c t u r e r o f t h e
c h a r g e r .
R e c o n n e c t s t a r t i n g w i t h t h e n e g a -
t i v e t e r m i n a l ( - ) .
Check that the terminals and
c o n n e c t o r s a r e c l e a n . I f t h e y a r e
c o v e r e d w i t h s u l p h a t e ( w h i t i s h o r
g r e e n i s h d e p o s i t ) , r e m o v e t h e m a n d
c l e a n t h e m .
A t t h e r i s k o f d i s c h a r g i n g t h e b a t -
t e r y , t h e d e a c t i v a t e d f u n c t i o n s c a n
b e r e a c t i v a t e d m a n u a l l y .
LOAD REDUCTION MODE
System which manages the use of certain
f u n c t i o n s i n r e l a t i o n t o t h e l e v e l o f c h a r g e r e -
m a i n i n g i n t h e b a t t e r y .
W h e n t h e v e h i c l e i s b e i n g d r i v e n , t h e l o a d
r e d u c t i o n f u n c t i o n t e m p o r a r i l y d e a c t i v a t e s
c e r t a i n f u n c t i o n s , s u c h a s t h e a i r c o n d i -
tioning, the neck heaters, the rear screen
d e - i c i n g . . .
T h e d e a c t i v a t e d f u n c t i o n s a r e r e a c t i v a t e d
a u t o m a t i c a l l y a s s o o n a s c o n d i t i o n s p e r m i t .
I t i s a d v i s a b l e t o d i s c o n n e c t t h e
b a t t e r y i f t h e v e h i c l e i s t o b e l e f t u n -
u s e d f o r m o r e t h a n o n e m o n t h . Before disconnecting the
battery
Wait 2 minutes after switching off
the ignition before disconnecting
t h e b a t t e r y .
Close the roof, the windows and
the doors before disconnecting the
b a t t e r y .
Following reconnection of the
battery
F o l l o w i n g r e c o n n e c t i o n o f t h e b a t -
tery, switch on the ignition and wait
1 minute before starting to permit
i n i t i a l i s a t i o n o f t h e e l e c t r o n i c s y s -
t e m s . H o w e v e r , i f s l i g h t d i f fi c u l t i e s
a r e e n c o u n t e r e d f o l l o w i n g t h i s o p e r -
a t i o n , c o n t a c t a P E U G E O T d e a l e r .
R e f e r r i n g t o t h e c o r r e s p o n d i n g s e c -
t i o n , y o u m u s t y o u r s e l f r e i n i t i a l i s e :
- t h e r e m o t e c o n t r o l k e y ,
- t h e e l e c t r i c w i n d o w s a n d t h e
automatic partial opening of the
door windows,
- t h e G P S s a t e l l i t e n a v i g a t i o n s y s t e m .
Page 163 of 221
10
!
i
149
PRACTICAL INFORMATION
A fl a t b a t t e r y p r e v e n t s t h e e n g i n e
f r o m s t a r t i n g ( r e f e r t o t h e c o r r e -
s p o n d i n g p a r a g r a p h ) .
I f t h e t e l e p h o n e i s b e i n g u s e d a t
t h i s t i m e :
- i t w i l l b e m a i n t a i n e d f o r 5 m i n u t e s w i t h t h e W I P S o u n d o r W I P N a v
h a n d s - f r e e k i t ,
- i t w i l l s t i l l b e p o s s i b l e t o fi n i s h t h e c a l l w i t h t h e W I P C o m 3 D .
ENERGY ECONOMY MODE
System which manages the duration of
u s e o f c e r t a i n f u n c t i o n s t o c o n s e r v e a
s u f fi c i e n t l e v e l o f c h a r g e i n t h e b a t t e r y .
A f t e r t h e e n g i n e h a s s t o p p e d , y o u c a n
still use functions such as the audio and
telematics system, windscreen wipers,
d i p p e d h e a d l a m p s , c o u r t e s y l i g h t s , e t c .
for a maximum combined duration of
t h i r t y m i n u t e s . Exiting economy mode
T h e s e f u n c t i o n s a r e r e a c t i v a t e d a u t o -
m a t i c a l l y n e x t t i m e t h e v e h i c l e i s d r i v e n .
I n o r d e r t o r e s u m e t h e u s e o f t h e s e
f u n c t i o n s i m m e d i a t e l y , s t a r t t h e e n -
g i n e a n d l e t i t r u n :
- f o r l e s s t h a n t e n m i n u t e s , t o u s e the equipment for approximately
fi v e m i n u t e s ,
- f o r m o r e t h a n t e n m i n u t e s , t o u s e t h e e q u i p m e n t f o r u p t o a p p r o x i -
m a t e l y t h i r t y m i n u t e s .
Switching to economy mode
O n c e t h e t h i r t y m i n u t e s a r e o v e r ,
a m e s s a g e a p p e a r s o n t h e m u l t i -
f u n c t i o n d i s p l a y i n d i c a t i n g t h a t t h e v e h i -
cle has switched to economy mode and
t h e a c t i v e f u n c t i o n s a r e p u t o n s t a n d b y .
CHANGING A WIPER BLADE
Procedure for replacing a worn wiper
blade with a new one without the use
o f t o o l s .
Removing a front wiper blade
R a i s e t h e c o r r e s p o n d i n g w i p e r a r m .
U n c l i p t h e w i p e r b l a d e a n d r e m o v e i t .
Fitting a front wiper blade
Check the size of the wiper blade
a s t h e s h o r t e r b l a d e i s fi t t e d o n t h e
r i g h t - h a n d s i d e o f t h e v e h i c l e .
Put the corresponding new wiper
b l a d e i n p l a c e a n d c l i p i t .
F o l d d o w n t h e w i p e r a r m c a r e f u l l y .
Before removing a front wiper
blade
Within one minute after switching off
the ignition, operate the wipers stalk
to position the wiper blades in the
c e n t r e o f t h e w i n d s c r e e n .
After fitting a front wiper blade
S w i t c h o n t h e i g n i t i o n .
Operate the wipers stalk again to
p a r k t h e w i p e r b l a d e s .
Page 184 of 221
170
11
04
11
22
33
44
22
11
HANDS-FREE KIT
For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching of the Bluetooth mobile telephone with your WIP Sound's hands-free k it must be carried out with the vehicle stationary and the ignition on.
Select the accessory which corresponds to the n a m e o f t h e v e h i c l e , a s u p e r i m p o s e d c o n fi g u r a t i o n display appears on the multifunction display.
Activate the telephone's Bluetooth function and carry out a search of the Bluetooth accessories present for the telephone.
Select the YES tab on the display using t h e b u t t o n s t h e n c o n fi r m b y p r e s s i n g O K .
E n t e r t h e v e h i c l e ' s a u t h e n t i c a t i o n c o d e ( = 1 2 3 4 ) . Depending on the telephone, you may be asked to enter this code before the superimposed c o n fi g u r a t i o n d i s p l a y a p p e a r s .
YES
YES
The services offered by the hands-free kit depend on the network, the SIM card and the compatibility of the Bluetooth equipment used. C o n s u l t y o u r t e l e p h o n e ' s m a n u a l a n d y o u r o p e r a t o r t o fi n d o u t w h i c h s e r v i c e s a r e a v a i l a b l e t o y o u . A list of mobile telephones which offer the best range of services is available from the network. Consul t a PEUGEOT dealer.
RECEIVING A CALL
An incoming call is announced by a ring and a supe rimposed display on the multifunction display.
Select the YES tab on the display using t h e b u t t o n s a n d c o n fi r m b y p r e s s i n g O K .
Press the end of the steering wheel stalk to accept the call.
Press the end of the steering wheel stalk for more than two seconds to access your directory.
To dial a number, use the keypad on your telephone.
MAKING A CALL
MATCHING A TELEPHONE
Page 212 of 221
195
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
06
11
22
33
22
11
ENTERING THE PIN CODE
Access the slot by pressing the button using the tip of a pen.
Install the SIM card in the holder and then insert it in the slot.
To remove the SIM card, repeat step 1.
Your SIM card must be installed and removed with t he WIP Com switched off and the ignition off.
Enter the PIN code on the keypad.
C o n fi r m t h e P I N c o d e b y p r e s s i n g button #.
PIN CODE
When entering your PIN code, tick the STORE PIN ta b to gain access to the telephone without having to enter this code when it is used subsequently.
TELEPHONE
INSTALLING YOUR SIM CARD
(NOT SUPPLIED)