2008 PEUGEOT 308 CC DAG wheel
[x] Cancel search: wheelPage 130 of 221
8
i
117
DRIVING
CRUISE CONTROL
System which automatically maintains
the speed of the vehicle at the value
programmed by the driver, without any
action on the accelerator pedal.
The cruise control is switched on
manually: it requires a minimum vehicle
speed of 25 mph (40 km/h) and the en-
gaging:
- of fourth gear on the manual gear- box,
- of second gear on the automatic gearbox, in sequential driving mode,
- of position D on the automatic gear-
box.
The cruise control is switched off
manually or by pressing the brake or
clutch pedal or on triggering of the ESP
system for safety reasons.
It is possible to exceed the programmed
speed temporarily by pressing the ac-
celerator pedal.
To return to the programmed speed,
simply release the accelerator pedal.
Switching off the ignition cancels any
programmed speed value. The controls of this system are grouped
together on lever
A .
1. Cruise control mode selection dial
2. Speed programming/value decrease
button
3. Speed programming/value increase
button
4. Cruise control off/resume button The programmed information is grouped
together on the instrument panel dis-
play.
5. Cruise control off/resume indication
6. Cruise control mode selection indica-
tion
7. Programmed speed value
Steering wheel controls Displays on the instrument
panel
The cruise control cannot, in any
circumstances, replace the need
to respect speed limits, nor can it
replace the need for vigilance and
responsibility on the part of the
driver.
You are advised to keep your feet
near the pedals at all times.
Page 142 of 221
10
i
129
PRACTICAL INFORMATION
PUNCTURE REPAIR KIT Using the kit
The puncture repair kit is located in the
b o o t u n d e r t h e fl o o r . I t i s i n s t a l l e d i n
the tool box, located under the storage
b o x .
Tick the wheel to be repaired on the
speed limitation sticker enclosed
t h e n a f fi x t h e s t i c k e r t o t h e v e h i c l e ' s
steering wheel to remind you that a
w h e e l i s i n t e m p o r a r y u s e .
Clip the bottle 1 on the compressor 2 .
Check that the switch A is tilted to
position "0" .
Connect the pipe of the bottle 1 to
t h e v a l v e o f t h e t y r e t o b e r e p a i r e d .
Connect the pipe of the compressor
2 t o t h e b o t t l e .
C o n n e c t t h e c o m p r e s s o r ' s e l e c t r i c
p l u g t o t h e v e h i c l e ' s 1 2 V s o c k e t .
S t a r t t h e v e h i c l e a n d l e a v e t h e e n -
g i n e r u n n i n g .
C o m p l e t e s y s t e m c o n s i s t i n g o f a c o m -
p r e s s o r a n d a b o t t l e o f fi l l i n g p r o d u c t
which permits
temporary repair of the
t y r e s o t h a t y o u c a n d r i v e t o t h e n e a r e s t
g a r a g e .
T h i s r e p a i r k i t i s a v a i l a b l e f r o m
P E U G E O T d e a l e r s .
I t i s d e s i g n e d t o r e p a i r h o l e s o f
a maximum diameter of 4 mm,
l o c a t e d e x c l u s i v e l y o n t h e t y r e
t r e a d o r b e a d t o e . A v o i d r e m o v i n g
a n y f o r e i g n b o d i e s w h i c h h a v e
p e n e t r a t e d t h e t y r e .
Page 144 of 221
10
!
i
131
PRACTICAL INFORMATION
Take care, the bottle of puncture
r e p a i r fl u i d c o n t a i n s e t h y l e n e - g l y c o l .
This product is harmful if swallowed
a n d c a u s e s i r r i t a t i o n t o t h e e y e s .
K e e p i t o u t o f r e a c h o f c h i l d r e n .
T h e e x p i r y d a t e o f t h e fl u i d i s i n d i -
c a t e d o n t h e b a s e o f t h e b o t t l e .
The bottle is designed for a single
u s e ; e v e n i f o n l y p a r t l y u s e d , i t m u s t
b e r e p l a c e d .
A f t e r u s e , d o n o t d i s c a r d t h e b o t t l e
i n t o t h e e n v i r o n m e n t , t a k e i t t o a
P E U G E O T d e a l e r o r t o a n o r g a n i -
s a t i o n r e s p o n s i b l e f o r i t s c o l l e c -
t i o n .
D o n o t f o r g e t t o o b t a i n a n e w b o t -
t l e o f fi l l i n g p r o d u c t , a v a i l a b l e f r o m
P E U G E O T d e a l e r s .
C o n n e c t t h e c o m p r e s s o r ' s e l e c t r i c
p l u g t o t h e v e h i c l e ' s 1 2 V s o c k e t
a g a i n .
S t a r t t h e v e h i c l e a g a i n a n d l e a v e t h e
e n g i n e r u n n i n g .
A d j u s t t h e p r e s s u r e u s i n g t h e c o m -
p r e s s o r ( t o i n fl a t e : s w i t c h A i n p o -
sition "1" ; t o d e fl a t e : s w i t c h A in
position "0" and press button B ), in
a c c o r d a n c e w i t h t h e v e h i c l e ' s t y r e
pressure label (located on the door
a p e r t u r e o n t h e d r i v e r ' s s i d e ) , t h e n
remember to check that the leak
i s fi l l e d c o r r e c t l y ( n o f u r t h e r l o s s o f
p r e s s u r e a f t e r s e v e r a l m i l e s [ k i l o m e -
t r e s ] ) .
R e m o v e t h e c o m p r e s s o r , t h e n s t o r e
t h e w h o l e k i t .
D r i v e a t r e d u c e d s p e e d ( 5 0 m p h
[ 8 0 k m / h ] ) .
V i s i t a P E U G E O T d e a l e r a s s o o n a s
p o s s i b l e t o h a v e t h e t y r e r e p a i r e d o r
r e p l a c e d b y a t e c h n i c i a n . I f t h e v e h i c l e i s fi t t e d w i t h t y r e u n -
d e r - i n fl a t i o n d e t e c t i o n , t h e t y r e
u n d e r - i n fl a t i o n w a r n i n g l i g h t w i l l r e -
main on after the wheel has been
r e p a i r e d u n t i l t h e s y s t e m i s r e i n i -
t i a l i s e d b y a P E U G E O T d e a l e r .
Page 145 of 221
10
i
132
PRACTICAL INFORMATION
CHANGING A WHEEL
Procedure for changing a faulty wheel
f o r t h e s p a r e w h e e l u s i n g t h e t o o l s p r o -
v i d e d w i t h t h e v e h i c l e .
The tools are installed in the boot under
t h e fl o o r .
T o g a i n a c c e s s t o t h e m :
c h a n g e t o t h e " c o u p é " c o n fi g u r a t i o n ,
open the boot,
r a i s e t h e fl o o r ,
secure it by hooking its handle on
the boot seal,
u n c l i p a n d r e m o v e t h e b o x c o n t a i n -
i n g t h e t o o l s . A l l o f t h e s e t o o l s a r e s p e c i fi c t o y o u r
v e h i c l e . D o n o t u s e t h e m f o r o t h e r
p u r p o s e s .
1. W h e e l b r a c e .
P e r m i t s r e m o v a l o f t h e w h e e l t r i m a n d r e m o v a l o f t h e w h e e l fi x i n g
b o l t s .
2. J a c k w i t h i n t e g r a l h a n d l e .
P e r m i t s r a i s i n g o f t h e v e h i c l e .
3. " B o l t c o v e r " t o o l .
P e r m i t s r e m o v a l o f t h e b o l t p r o - t e c t o r s ( c o v e r s ) o n a l l o y w h e e l s .
4. C e n t r i n g g u i d e .
P e r m i t s t h e r e fi t t i n g o f a n a l l o y w h e e l o n t h e h u b .
List of tools
Other accessories
6. R e m o v a b l e t o w i n g e y e .
Refer to the paragraph "Towing t h e v e h i c l e " .
Access to the tools
Wheel with trim
When removing the wheel , detach
t h e t r i m fi r s t u s i n g t h e w h e e l b r a c e
1 p u l l i n g a t t h e v a l v e p a s s a g e h o l e .
W h e n r e fi t t i n g t h e w h e e l , r e fi t t h e
t r i m s t a r t i n g b y p l a c i n g i t s n o t c h f a c -
i n g t h e v a l v e a n d p r e s s a r o u n d i t s
e d g e w i t h t h e p a l m o f y o u r h a n d .
5. S o c k e t f o r t h e a n t i - t h e f t b o l t s
( l o c a t e d i n t h e g l o v e b o x ) .
P e r m i t s a d a p t a t i o n o f t h e w h e e l - b r a c e t o t h e s p e c i a l " a n t i - t h e f t "
b o l t s .
Page 146 of 221
10
i
i
133
PRACTICAL INFORMATION
Fixing the steel spare wheel
I f y o u r v e h i c l e i s fi t t e d w i t h a l l o y
wheels, it is normal to notice, when
t i g h t e n i n g t h e b o l t s o n fi t t i n g , t h a t
t h e w a s h e r s d o n o t c o m e i n t o c o n -
t a c t w i t h t h e s t e e l s p a r e w h e e l . T h e
wheel is secured by the conical
c o n t a c t o f e a c h b o l t .
Access to the spare wheel
The spare wheel is installed in the boot
u n d e r t h e fl o o r .
A c c o r d i n g t o c o u n t r y , t h e s p a r e w h e e l
m a y b e s t e e l o r a l l o y .
T o g a i n a c c e s s t o i t , r e f e r t o t h e p a r a -
g r a p h " A c c e s s t o t h e t o o l s " o n t h e p r e v i -
o u s p a g e .
Taking out the wheel
U n s c r e w t h e y e l l o w c e n t r a l b o l t .
Raise the spare wheel towards you
f r o m t h e r e a r .
T a k e t h e w h e e l o u t o f t h e b o o t .
Putting the wheel back in place
P u t t h e w h e e l b a c k i n i t s h o u s i n g .
Unscrew the yellow central bolt by a
few turns then put it in place in the
c e n t r e o f t h e w h e e l .
Tighten fully until the central bolt
c l i c k s t o r e t a i n t h e w h e e l c o r r e c t l y .
P u t t h e b o x b a c k i n p l a c e i n t h e c e n -
t r e o f t h e w h e e l a n d c l i p i t .
T y r e u n d e r - i n fl a t i o n d e t e c t i o n
T h e s p a r e w h e e l i s n o t fi t t e d w i t h
a s e n s o r . T h e p u n c t u r e d w h e e l
must be repaired by a PEUGEOT
d e a l e r .
Page 147 of 221
10
i
134
PRACTICAL INFORMATION
Parking the vehicle
I m m o b i l i s e t h e v e h i c l e w h e r e i t
d o e s n o t b l o c k t r a f fi c : t h e g r o u n d
m u s t b e l e v e l , s t a b l e a n d n o n -
s l i p p e r y g r o u n d .
A p p l y t h e h a n d b r a k e , s w i t c h o f f t h e
i g n i t i o n a n d e n g a g e fi r s t g e a r * t o
l o c k t h e w h e e l s .
I f n e c e s s a r y , p l a c e a c h o c k u n d e r
the wheel diagonally opposite the
w h e e l t o b e c h a n g e d .
I t i s i m p e r a t i v e t h a t y o u e n s u r e t h a t
t h e o c c u p a n t s g e t o u t o f t h e v e h i c l e
a n d w a i t w h e r e t h e y a r e s a f e .
N e v e r g o u n d e r n e a t h a v e h i c l e
r a i s e d u s i n g a j a c k ; u s e a n a x l e
s t a n d .
Removing the wheel
List of operations
R e m o v e t h e c h r o m e d b o l t c o v e r f r o m
each of the bolts using the tool 3 .
F i t t h e a n t i - t h e f t s o c k e t 5 o n t h e
wheelbrace 1 t o u n l o c k t h e a n t i - t h e f t
b o l t .
Unlock the other bolts using the
wheelbrace 1 o n l y .
P l a c e t h e j a c k 2 in contact with one
of the two front A or rear B locations
p r o v i d e d o n t h e u n d e r f r a m e , w h i c h -
e v e r i s c l o s e s t t o t h e w h e e l t o b e
c h a n g e d .
E x t e n d t h e j a c k 2 until its base plate
i s i n c o n t a c t w i t h t h e g r o u n d . E n s u r e
t h a t t h e c e n t r e l i n e o f t h e j a c k b a s e
plate is directly below the location A
or B u s e d .
R a i s e t h e v e h i c l e u n t i l t h e r e i s s u f -
fi c i e n t s p a c e b e t w e e n t h e w h e e l a n d
the ground to admit the spare (not
p u n c t u r e d ) w h e e l e a s i l y .
R e m o v e t h e b o l t s a n d s t o r e t h e m i n
a c l e a n p l a c e .
R e m o v e t h e w h e e l .
* p o s i t i o n P f o r t h e a u t o m a t i c g e a r b o x .
Page 148 of 221
10
i
135
PRACTICAL INFORMATION
After changing a wheel
To store the punctured wheel in the
b o o t c o r r e c t l y , fi r s t r e m o v e t h e c e n -
t r a l c o v e r .
H a v e t h e t i g h t e n i n g o f t h e b o l t s a n d
the pressure of the spare wheel
checked by a PEUGEOT dealer
w i t h o u t d e l a y .
H a v e t h e p u n c t u r e d w h e e l r e p a i r e d
a n d r e p l a c e i t o n t h e v e h i c l e a s
s o o n a s p o s s i b l e .
Fitting the wheel
List of operations
Put the wheel in place on the hub
using the centring guide 4 .
Screw in the bolts by hand to the
s t o p .
P r e - t i g h t e n t h e a n t i - t h e f t b o l t u s i n g
the wheelbrace 1 fi t t e d w i t h t h e a n t i -
t h e f t s o c k e t 5 .
P r e - t i g h t e n t h e o t h e r b o l t s u s i n g t h e
wheelbrace 1 o n l y .
L o w e r t h e v e h i c l e f u l l y .
F o l d t h e j a c k 2 a n d d e t a c h i t .
L o c k t h e a n t i - t h e f t b o l t u s i n g t h e
wheelbrace 1 fi t t e d w i t h t h e a n t i -
t h e f t s o c k e t 5 .
L o c k t h e o t h e r b o l t s u s i n g t h e w h e e l -
brace 1 o n l y .
R e fi t t h e c h r o m e d b o l t c o v e r s o n
e a c h o f t h e b o l t s .
S t o r e t h e t o o l s i n t h e b o x .
Page 155 of 221
10PRACTICAL INFORMATION
Fascia fuses
The fuse box is placed in the lower
s e c t i o n o f t h e f a s c i a ( l e f t - h a n d s i d e ) .
Access to the fuses
r e f e r t o t h e p a r a g r a p h " A c c e s s t o
t h e t o o l s " . Fuse tables
Fuse N° Rating Functions
G36 30 A D r i v e r a n d p a s s e n g e r h e a t e d s e a t s .
G37 5 A T r a i l e r f u s e b o x .
G38 30 A D r i v e r ' s s e a t m e m o r y u n i t .
G39 - N o t u s e d .
G40 30 A H i - F i a m p l i fi e r , p a s s e n g e r ' s s e a t m e m o r y u n i t .
Fuse N° Rating Functions
F1 - N o t u s e d .
F2 - N o t u s e d .
F3 5 A A i r b a g s a n d p r e t e n s i o n e r s c o n t r o l u n i t .
F4 10 A C l u t c h p e d a l a n d d u a l - f u n c t i o n b r a k e s w i t c h e s ,
electrochromatic interior mirror, air conditioning,
steering wheel angle sensor, automatic gearbox,
s w i t c h i n g a n d p r o t e c t i o n u n i t .
F5 30 A F r o n t o n e - t o u c h e l e c t r i c w i n d o w s , f o l d i n g m i r r o r s
s u p p l y .
F6 30 A R e a r o n e - t o u c h e l e c t r i c w i n d o w s , e x t e r i o r d o o r
o p e n i n g c o n t r o l s .
F7 5 A Front and rear courtesy lights, map reading lights,
s u n v i s o r l i g h t i n g , g l o v e b o x l i g h t i n g .