Page 106 of 127
PRACTICAL INFORMATION
96 -
Dipped headlamps H7 55W/
main beam headlamps H1 55 W
F Remove the protective cover A
for the H7 55 W bulb or B for the
H1 55 W bulb.
F Disconnect the connector(s) C.
F Press the end of the securing
clip(s) D to remove it(them).
Change the faulty bulb.
CHANGING A BULB
T o m a k e a c c e s s e a s i e r , on the right-
hand side , i r s t r e m o v e t h e s c r e e n
w a s h r e s e r v o i r i l l e r p i p e :
F a l i g n t h e n o t c h e s b y t u r n i n g ,
F p u l l u p w a r d s .
1. Dipped beam headlamps/
main beam headlamps
2. Side lights
3. Direction indicators F
O n i t t i n g , e n s u r e t h a t t h e
direction notches are in the
correct position and that the
securing clip(s) is(are) secured
correctly.
F Reconnect the connector.
F R e p l a c e t h e p r o t e c t i v e c o v e r ( s ) ,
t h e n t h e s c r e e n w a s h r e s e r v o i r
i l l e r p i p e ( r i g h t - h a n d s i d e ) .
Page 107 of 127
97
PRACTICAL INFORMATION
-
Amber direction indicators
PY 21 W
F Turn the pin connector 3 a
q u a r t e r t u r n ( t o w a r d s t h e f r o n t o f
the vehicle) and remove it.
F Change the bulb. Amber direction indicator
side repeater WY 5 W
F
P u s h t h e r e p e a t e r f o r w a r d s a n d
release it.
F Remove the repeater and
change it.
It can be obtained from a PEUGEOT
dealer.
Side lights W 5 W
F
Turn the pin connector 2 a
quarter turn and remove it.
F Change the bulb.
H a n d l e t h e b u l b s w i t h a
dry cloth.
T h e h e a d l a m p s a r e i t t e d
w i t h p o l y c a r b o n g l a s s w i t h
a protective coating.
Do
not clean them using a dry or
abrasive cloth, or using deter-
gents or solvents.
U s e a s p o n g e a n d s o a p y w a t e r .
High pressure washing
W h e n u s i n g t h i s t y p e o f w a s h i n g
o n s t u b b o r n d i r t , d o n o t p e r s i s t o n
t h e h e a d l a m p s , l i g h t s a n d t h e i r
surrounds to avoid damaging their
coating and seal.
Page 108 of 127
PRACTICAL INFORMATION
98 -
Unclip the boot side trim.
Unclip the foam cover and reach
b e h i n d t h e c o v e r t o l o c a t e t h e w i n g
nut.
R e m o v e t h e w i n g n u t .
Release the light unit.
Press the lug A and disconnect the
connector.
Remove the foam.
Move aside the tabs B and remove
the bulb holder.
Change the faulty bulb.
W h e n r e i t t i n g , e n s u r e t h a t t h e b u l b
h o l d e r , t h e l i g h t a n d t h e f o a m c o v e r
are repositioned correctly. Third brake light 5 bulbs
W 5 W
U s i n g a 1 0 m m s p a n n e r , u n s c r e w t h e
2 nuts
A.
Release the light unit.
S q u e e z e t h e t w o t a b s B to release
the bulb holder.
Change the faulty bulb.
Rear lights
1.
Direction indicators P21 W.
2. Reversing lights P21 W.
3. Brake lights/side lights
P21/5 W.
Page 109 of 127
99
PRACTICAL INFORMATION
-
Front fog lamps H1 55 W
P r e s s u n d e r t h e a c c e s s l a p t o r e-
lease it.
O p e n t h e l a p .
Turn the cover to remove it.
Disconnect the bulb.
P r e s s t h e t w o e n d s o f t h e s e c u r i n g
clip to release the bulb. Rear fog lamp P21 W
Unclip the lamp and release the as-
sembly.
Turn the pin connector a quarter turn
and remove it.
Change the bulb.
Number plate lights W 5 W
I n s e r t a t h i n s c r e w d r i v e r i n t o o n e o f t h e
outer holes of the transparent cover.
P u s h i t o u t w a r d s t o u n c l i p i t .
Remove the transparent cover.
Change the faulty bulb.
