2008 Peugeot 206 SW Dag light
[x] Cancel search: lightPage 94 of 123
87
SAFETY
-
The driver must ensure
that the passengers use
the seat belts correctly and
that they are all properly re-
strained before setting off.
Wherever you are seated in the ve-
hicle, always fasten your seat belt,
even for short journeys.
Do not invert the seat belt buckles
a s t h e y w i l l n o t f u l i l t h e i r r o l e f u l l y .
If the seats have armrests*, the lap
part of the seat belt must always
pass under the armrest.
T h e s e a t b e l t s a r e i t t e d w i t h a n i n -
ertia reel permitting automatic ad-
justment of the length of the strap
to your size. The seat belt is stored
automatically when not in use.
Before and after use, ensure that
the seat belt is rolled up correctly.
The lower part of the strap must be
positioned as low as possible on
the pelvis.
The upper part must be positioned
in the hollow of the shoulder.
T h e i n e r t i a r e e l s a r e i t t e d w i t h a n
automatic locking device which
comes into operation in the event of
a collision, on emergency braking
or if the vehicle rolls over. You can
release the device by pulling rapidly
on the strap and releasing it. In order to be effective, a seat belt:
- must be tightened as close to the
body as possible,
- must restrain one adult only,
- must not bear any trace of cuts or fraying,
- must be pulled in front of you with a smooth movement,
checking that it does not twist,
- must not be transformed or m o d i i e d t o a v o i d a l t e r i n g i t s
performance.
In accordance with current safety
regulations, all repairs and checks
must be carried out by a PEUGEOT
dealer who guarantees that the work
is carried out correctly.
Have your seat belts checked regu-
larly by a PEUGEOT dealer and par-
ticularly if the straps show signs of
damage.
Clean the seat belt straps with soapy
water or a textile cleaning product,
sold by PEUGEOT dealers.
After folding or moving a seat or rear
bench seat, ensure that the seat belt
is positioned and rolled up correctly. Recommendations for
c h i l d r e n :
- use a suitable child seat if the
passenger is less than 12 years
old or shorter than one metre
i f t y ,
- do not use the strap-guide* when a child seat is installed.
- never use the same seat belt to secure more than one person,
- never allow a child to travel on your lap.
D e p e n d i n g o n t h e n a t u r e a n d s e -
r i o u s n e s s o f t h e i m p a c t s , the pre-
tensioning device may be triggered
before and independently of the
air bags. Triggering of the pre-ten-
sioners is accompanied by a slight
emission of harmless smoke and a
noise, due to the activation of the
pyrotechnic cartridge incorporated
in the system.
In all cases, the air bag warning
light comes on.
Following an impact, have the seat
belts system checked, and if nec-
essary replaced, by a PEUGEOT
dealer.
* According to model.
Page 102 of 123
PRACTICAL INFORMATION
9 6 -
Dipped headlamps H7 55W /
main beam headlamps H1 55W
F Remove the protective cover A
for the H7 55W bulb or B for the
H1 55W bulb.
F D i s c o n n e c t t h e c o n n e c t o r ( s ) C.
F Press the end of the securing
c l i p ( s ) D t o r e m o v e i t ( t h e m ) .
Change the faulty bulb.CHANGING A BULB
To make access easier, on the right-
hand side , i r s t r e m o v e t h e s c r e e n
w a s h r e s e r v o i r i l l e r p i p e :
F align the notches by turning,
F pull upwards.
1. Dipped beam headlamps /
main beam headlamps
2. Side lights
3. Direction indicators F
O n i t t i n g , e n s u r e t h a t t h e
direction notches are in the
correct position and that the
s e c u r i n g c l i p ( s ) i s ( a r e ) s e c u r e d
correctly.
F Reconnect the connector.
F R e p l a c e t h e p r o t e c t i v e c o v e r ( s ) ,
then the screen wash reservoir
i l l e r p i p e ( r i g h t - h a n d s i d e ) .
Page 103 of 123
97
PRACTICAL INFORMATION
-
Amber direction indicators PY21W
F Turn the pin connector 3 a
q u a r t e r t u r n ( t o w a r d s t h e f r o n t o f
the vehicle) and remove it.
F Change the bulb. Amber direction indicator
side repeater WY5W
F
Push the repeater forwards and
release it.
F Remove the repeater and
change it.
It can be obtained from a PEUGEOT
dealer.
Side lights W5W
F
Turn the pin connector 2 a
quarter turn and remove it.
F Change the bulb.
Handle the bulbs with a
dry cloth.
T h e h e a d l a m p s a r e i t
-
ted with polycarbon glass
with a protective coating. Do not
clean them using a dry or abra-
sive cloth, or using detergents
or solvents.
Use a sponge and soapy water.
High pressure washing
When using this type of washing
on stubborn dirt, do not persist on
the headlamps, lights and their
surrounds to avoid damaging their
coating and seal.
Page 104 of 123
PRACTICAL INFORMATION
9 8 -
Unclip the boot side trim.
Unclip the foam cover and reach
behind the cover to locate the wing
nut.
Remove the wing nut.
Release the light unit.
Press the lug A and disconnect the
connector.
Remove the foam.
Move aside the tabs B and remove
the bulb holder.
Change the faulty bulb.
W h e n r e i t t i n g , e n s u r e t h a t t h e b u l b
holder, the light and the foam cover
are repositioned correctly. Third brake light 5 bulbs
W5W
U s i n g a 1 0 m m s p a n n e r , u n s c r e w t h e
2 n u t s
A.
Release the light unit.
Squeeze the two tabs B to release
the bulb holder.
Change the faulty bulb.
Rear lights
1.
Direction indicators
P21W.
2. Reversing lights P21W.
3. Brake lights/side lights
P21/5W.
Page 105 of 123
99
PRACTICAL INFORMATION
-
Front fog lamps
H1 55W
P r e s s u n d e r t h e a c c e s s l a p t o r e-
lease it.
O p e n t h e l a p .
Turn the cover to remove it.
Disconnect the bulb.
Press the two ends of the securing
clip to release the bulb. Rear fog lamp P21W
Unclip the lamp and release the as-
sembly.
Turn the pin connector a quarter turn
and remove it.
Change the bulb.
Number plate lights
W5W
Insert a thin screwdriver into one of the
outer holes of the transparent cover.
Push it outwards to unclip it.
Remove the transparent cover.
Change the faulty bulb.
Page 108 of 123
1 0 1
PRACTICAL INFORMATION
-
Fuse N° Rating Functions
1 15A Heated seat - Alarm
4 2 0 AMultifunction display - Boot lighting - Audio equipment - Stee ring wheel controls - Trailer
5 15A Automatic gearbox diagnostics
6 1 0 A C o o l a n t l e v e l - A u t o m a t i c g e a r b o x - A u d i o e q u i p m e n t - S t e e r i n g w h e e l a n g l e s e n s o r ( E S P )
7 15A D r i v i n g s c h o o l a c c e s s o r y - A l a r m i t t e d a s a n a c c e s s o r y
9 3 0 A Rear electric windows
1 0 4 0 A Rear screen and mirror demisting
11 15A Rear windscreen wiper
1 2 3 0 A Front electric windows - Sunroof
14 1 0 AEngine fuse box - Air bags - Steering wheel controls - Rain sensor
15 15A Instrument panel - Multifunction display - Air condition ing - Audio equipment
1 6 3 0 A L o c k i n g / u n l o c k i n g c o n t r o l s f o r d o o r s , b o n n e t a n d b o o t
2 0 1 0 A Right-hand brake light
2 1 15A Left-hand brake light - 3rd brake light
2 2 2 0 A Front courtesy light - Map reading light - Glove box lighting - Lighter
S1 Shunt PARC shunt
Page 111 of 123
PRACTICAL INFORMATION
1 0 4 -
BATTERY
To charge the battery using a bat-
tery charger:
- Disconnect the battery,
- Follow the instructions for use
given by the battery charger
manufacturer,
- Reconnect starting with the n e g a t i v e ( - ) t e r m i n a l ,
- Check that the terminals and connectors are clean. If they are
c o v e r e d w i t h s u l p h a t e ( w h i t e o r
greenish deposit), disconnect
them and clean them. - W a i t f o r 2 m i n u t e s
after switching off
the ignition before
disconnecting the
battery.
- Never disconnect a terminal when the engine is running.
- Never charge a battery w i t h o u t i r s t d i s c o n n e c t i n g t h e
terminals.
- Close the windows and the roof before disconnecting the
battery.
- After every reconnection of the battery, switch on the
ignition and wait 1 minute
before starting to allow the
electronic systems to be
i n i t i a l i s e d . I f s l i g h t d i f i c u l t i e s
are experienced after this,
please consult a PEUGEOT
dealer.
It is advisable to disconnect the
battery if the vehicle is not to be
used for a period of more than
one month.
ECONOMY MODE
FUNCTION
After the engine has stopped, certain
f u n c t i o n s ( w i n d s c r e e n w i p e r , e l e c
-
tric windows, courtesy lights, audio
equipment, etc.) can only be used for
a combined duration of approximately
thirty minutes, to prevent discharging
the battery.
Once the thirty minutes are over, a
switching to economy mode mes-
sage appears on the multi-function
display and the active functions are
put on standby.
These functions are reactivated au-
tomatically next time the vehicle is
driven.
In order to resume the use of these
functions immediately, the engine
must be started and left to run for a
few minutes.
The time available to you will then
be double the duration for which the
engine is left running. However,
this period will always be between
i v e a n d t h i r t y m i n u t e s .
To start the vehicle from another
battery:
- Connect the red cable to the
p o s i t i v e ( + ) t e r m i n a l s o f t h e
two batteries,
- Connect one end of the green o r b l a c k c a b l e t o t h e n e g a t i v e ( - )
terminal of the slave battery,
- Connect the other end of the green or black cable to an
earth point on the broken down
vehicle, as far as possible from
t h e b a t t e r y ( f o r e x a m p l e , r i g h t -
hand engine mounting),
- Operate the starter, let the engine run,
- Wait for the engine to return to idle, then disconnect the cables.
A l a t b a t t e r y p r e v e n t s t h e
engine from starting.
Page 114 of 123
1 0 7
PRACTICAL INFORMATION
-
TOWING A TRAILER,
CARAVAN, BOAT, ETC.
We recommend the use of original
PEUGEOT towbars and their har-
nesses that have been tested and
approved from the design stage of
y o u r v e h i c l e a n d t h a t t h e i t t i n g o f t h e
towbar is entrusted to a PEUGEOT
dealer.
I f t h e t o w b a r i s n o t i t t e d b y a P E U G E O T
d e a l e r , i t i s i m p e r a t i v e t h a t i t i s i t t e d u s -
ing the electrical pre-equipment installed
at the rear of the vehicle, in accordance
with the manufacturer's instructions.
Your vehicle is primarily designed
for transporting people and luggage
but it may also be used for towing a
trailer.
Driving with a trailer subjects the tow-
i n g v e h i c l e t o m o r e s i g n i i c a n t s t r e s s
and its driver must be particularly
careful.
Air density decreases with altitude,
thus reducing engine performance.
A b o v e 1 0 0 0 m e t r e s , t h e m a x i m u m
t o w i n g l o a d m u s t b e r e d u c e d b y 1 0 %
a n d s o o n f o r e v e r y 1 0 0 0 m e t r e s o f
altitude. Driving advice
Distribution of loads:
Distribute the
load in the trailer so that the heaviest
items are as close as possible to the
axle and the nose weight approach-
es the maximum permitted without
exceeding it.
Cooling: Towing a trailer on a slope
increases the temperature of the
coolant.
As the fan is electrically controlled,
its cooling capacity is not dependent
on the engine speed.
On the contrary, use a high gear to
lower the engine speed and reduce
your speed.
The maximum towing load on a long
slope depends on the gradient and
the outside temperature. In all cases, pay attention to the cool-
ant temperature.
In certain cases of particularly ardu-
o u s u s e ( t o w i n g t h e m a x i m u m l o a d
on a steep gradient in high tempera-
tures), switching off the air condition-
ing permits the recovery of engine
power and therefore an increase in
the towing capacity.
If the warning light comes on, stop
the vehicle and switch off the engine
as soon as possible.
Tyres :
Check the tyre pressures of
the towing vehicle and of the trailer,
observing the recommended pres-
sures.
Braking : Towing increases the brak-
ing distance.
Lights : Check the electrical signal-
ling on the trailer.
Side wind : Take into account the in-
creased sensitivity to side wind.