2008 PEUGEOT 206 lock
[x] Cancel search: lockPage 24 of 127
MULTIFUNCTION DISPLAYS
26 -
CLOCKAdjusting the parameters
Press and hold button 1 f o r t w o s e c -
o n d s t o a c c e s s t h e s e t t i n g s ; t h e d a t a
l a s h e s , i n d i c a t i n g i t i s r e a d y t o b e
m o d i i e d .
T h e n , e a c h p r e s s o f b u t t o n 1 scrolls
through the various data in the fol-
l o w i n g o r d e r :
- language of information d i s p l a y e d ,
- h o u r s ( 1 2 t h e n 2 4 h o u r m o d e ) ,
- m i n u t e s ,
- y e a r ,
- m o n t h ,
- d a y ,
- unit of temperature (degrees Celsius or Fahrenheit).
Pressing button 2 a l l o w s m o d i i c a t i o n
of the data selected. Press and hold
for rapid advance (return to start after
the last possible value).
A f t e r 7 s e c o n d s w i t h n o a c t i o n , t h e
m a i n d i s p l a y r e t u r n s ; t h e m o d i i e d
d a t a a r e n o w r e c o r d e d .
Note: Pressing button 2 b r i e l y d i s -
plays the outside temperature for a
f e w s e c o n d s .
Button
1: hour adjustment
Button 2: minute adjustment
Press and hold the button for rapid
advance.DISPLAY A
T h i s d i s p l a y s t h e f o l l o w i n g i n f o r m a -
tion:
- t h e t i m e ,
- t h e d a t e ,
- the outside temperature (this l a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- t h e a u d i o s y s t e m d i s p l a y s ,
- a door check (e.g.: ''left front d o o r o p e n ' ' ) ,
- w a r n i n g m e s s a g e s ( e . g . ' ' r e m o t e c o n t r o l b a t t e r y l a t ' ' )
or information messages
( e . g . ' ' e c o n o m y m o d e a c t i v e ' ' ) ,
displayed temporarily.
Page 46 of 127
47
COMFORT
-
FRONT SEATS It is impossible to access the
rear seats if the front seat is in a
reclining position.
B. P l a c e y o u r i n g e r s i n o n e o f t h e
t w o h a n d l e s a n d p u s h f o r w a r d s
t o f o l d d o w n t h e s e a t b a c k . T h e
s e a t d o e s n o t m o v e f o r w a r d .
W h e n p u t b a c k , t h e s e a t b a c k
returns to its initial angle.
N e v e r d r i v e w i t h t h e h e a d
r e s t r a i n t s r e m o v e d ; t h e y
should be in place and
correctly adjusted.
"Comma" type rear head restraints
T h e s e h a v e o n e p o s i t i o n f o r w h e n
they are in use (high) and a storage
p o s i t i o n ( l o w ) . T h e y c a n b e r e m o v e d .
T o l o w e r t h e h e a d r e s t r a i n t s , p r e s s
the lug.
T o r e m o v e t h e m , p u l l u p w a r d s a s f a r
as the stop then press the release
control.
1 - Forwards-backwards
adjustment
Lift the control and slide the seat for-
w a r d s o r b a c k w a r d s .
2 - Head restraint height and angle adjustment
T o r a i s e t h e r e s t r a i n t , p u l l i t u p w a r d s .The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
T h e h e a d r e s t r a i n t i s i t t e d w i t h a
f r a m e w i t h n o t c h e s , w h i c h p r e v e n t
t h e h e a d r e s t r a i n t d r o p p i n g d o w n
(this is a safety device in the case of
impact).
T o l o w e r t h e h e a d r e s t r a i n t , i t i s n e c -
essary to push simultaneously:
- the button located on the left- hand guide at the base of the
h e a d r e s t r a i n t f r a m e ,
- t h e h e a d r e s t r a i n t d o w n w a r d s .
T o r e m o v e t h e h e a d r e s t r a i n t , p r e s s
the lug.
The head restraint angle can also be
adjusted. 3 - Access to the rear seats
( 3 - d o o r ) , A or B according to
version
A. P l a c e y o u r i n g e r s i n o n e o f t h e
t w o h a n d l e s a n d p u s h f o r w a r d s
t o f o l d d o w n t h e s e a t b a c k a n d
m o v e t h e s e a t f o r w a r d s .
W h e n p u t b a c k , t h e s e a t r e t u r n s
to its initial position.
No person or object must
prevent the seat from returning
to its initial position. Returning to
this position is necessary for it to
be locked. 4 - Height adjustment
P u l l t h e h a n d l e u p w a r d s .
R e m o v e y o u r w e i g h t f r o m t h e s e a t t o
r a i s e , o r p r e s s o n t h e s e a t t o l o w e r .
5 - Seat back angle adjustment
P u s h t h e h a n d l e t o w a r d s t h e r e a r .
Page 47 of 127
47
COMFORT
-
FRONT SEATS It is impossible to access the
rear seats if the front seat is in a
reclining position.
B. P l a c e y o u r i n g e r s i n o n e o f t h e
t w o h a n d l e s a n d p u s h f o r w a r d s
t o f o l d d o w n t h e s e a t b a c k . T h e
s e a t d o e s n o t m o v e f o r w a r d .
W h e n p u t b a c k , t h e s e a t b a c k
returns to its initial angle.
N e v e r d r i v e w i t h t h e h e a d
r e s t r a i n t s r e m o v e d ; t h e y
should be in place and
correctly adjusted.
"Comma" type rear head restraints
T h e s e h a v e o n e p o s i t i o n f o r w h e n
they are in use (high) and a storage
p o s i t i o n ( l o w ) . T h e y c a n b e r e m o v e d .
T o l o w e r t h e h e a d r e s t r a i n t s , p r e s s
the lug.
T o r e m o v e t h e m , p u l l u p w a r d s a s f a r
as the stop then press the release
control.
1 - Forwards-backwards
adjustment
Lift the control and slide the seat for-
w a r d s o r b a c k w a r d s .
2 - Head restraint height and angle adjustment
T o r a i s e t h e r e s t r a i n t , p u l l i t u p w a r d s .The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
T h e h e a d r e s t r a i n t i s i t t e d w i t h a
f r a m e w i t h n o t c h e s , w h i c h p r e v e n t
t h e h e a d r e s t r a i n t d r o p p i n g d o w n
(this is a safety device in the case of
impact).
T o l o w e r t h e h e a d r e s t r a i n t , i t i s n e c -
essary to push simultaneously:
- the button located on the left- hand guide at the base of the
h e a d r e s t r a i n t f r a m e ,
- t h e h e a d r e s t r a i n t d o w n w a r d s .
T o r e m o v e t h e h e a d r e s t r a i n t , p r e s s
the lug.
The head restraint angle can also be
adjusted. 3 - Access to the rear seats
( 3 - d o o r ) , A or B according to
version
A. P l a c e y o u r i n g e r s i n o n e o f t h e
t w o h a n d l e s a n d p u s h f o r w a r d s
t o f o l d d o w n t h e s e a t b a c k a n d
m o v e t h e s e a t f o r w a r d s .
W h e n p u t b a c k , t h e s e a t r e t u r n s
to its initial position.
No person or object must
prevent the seat from returning
to its initial position. Returning to
this position is necessary for it to
be locked. 4 - Height adjustment
P u l l t h e h a n d l e u p w a r d s .
R e m o v e y o u r w e i g h t f r o m t h e s e a t t o
r a i s e , o r p r e s s o n t h e s e a t t o l o w e r .
5 - Seat back angle adjustment
P u s h t h e h a n d l e t o w a r d s t h e r e a r .
Page 48 of 127
COMFORT
48 -
- position the seat belt under the
belt holder 2 ,
- pull control 3 to unlock the seat
back 4 ,
- r e m o v e o r l o w e r t h e h e a d r e s t r a i n t ,
- tilt the seat back 4.
Always start with the seat, never
the seat back (risk of damage).
REAR SEATS
To fold the rear seats:- lift the front of the seat cushion 1 ,
- tilt the seat cushion 1 against the
f r o n t s e a t s , When repositioning:
- return the seat back to the
u p r i g h t p o s i t i o n ,
- f o l d b a c k t h e s e a t c u s h i o n ,
- reposition the buckles before locking the front of the seat
cushion.
Take care not to trap the seat belts.
Page 49 of 127
49
COMFORT
-
- position the seat belt under the
belt holder 2 ,
- pull the controls 3 to unlock the
seat back 4 ,
- r e m o v e o r l o w e r t h e h e a d
r e s t r a i n t s ,
- tilt the seat back 4.
Always start with the seat, never
the seat back (risk of damage).
BENCH SEAT
To fold the bench seat:- lift the front of the seat cushion 1 ,
- tilt the seat cushion 1 against the
f r o n t s e a t s , When repositioning:
- return the seat back to the
u p r i g h t p o s i t i o n ,
- f o l d b a c k t h e s e a t c u s h i o n ,
- reposition the buckles before locking the front of the seat
cushion.
Take care not to trap the seat
belts.
Page 51 of 127
49
COMFORT
-
- position the seat belt under the
belt holder 2 ,
- pull the controls 3 to unlock the
seat back 4 ,
- r e m o v e o r l o w e r t h e h e a d
r e s t r a i n t s ,
- tilt the seat back 4.
Always start with the seat, never
the seat back (risk of damage).
BENCH SEAT
To fold the bench seat:- lift the front of the seat cushion 1 ,
- tilt the seat cushion 1 against the
f r o n t s e a t s , When repositioning:
- return the seat back to the
u p r i g h t p o s i t i o n ,
- f o l d b a c k t h e s e a t c u s h i o n ,
- reposition the buckles before locking the front of the seat
cushion.
Take care not to trap the seat
belts.
Page 59 of 127
57
ACCESS
-
KEYS
T h e k e y s a l l o w y o u t o s w i t c h o n t h e
ignition and independently oper-
ate the passenger air bag disarming
s w i t c h a n d t h e s t e e r i n g l o c k . Locating your vehicle
T o l o c a t e y o u r v e h i c l e , i f y o u h a v e
l o c k e d i t , i n a c a r p a r k :
F
press button A , t h e c o u r t e s y
lights come on and the direction
i n d i c a t o r s l a s h f o r a f e w
seconds.
Changing the remote control
battery
Battery ref.: CR2016/3 volts.
W a r n i n g t h a t t h e b a t t e r y i s l a t i s g i v e n
by an audible signal accompanied by
the message "Remote control bat-
tery low" on the multifunction display.
T o r e p l a c e t h e b a t t e r y , r e m o v e t h e
s c r e w t h e n u n c l i p t h e c a s i n g u s i n g a
coin at the ring.
I f t h e r e m o t e c o n t r o l d o e s n o t w o r k
a f t e r t h e b a t t e r y h a s b e e n c h a n g e d ,
reprogramme the remote control.
Key in ignition
A buzzer sounds on opening the
d r i v e r ’ s d o o r , i f t h e k e y h a s b e e n l e f t
in the ignition. Programming the remote
control
F
S w i t c h o f f t h e i g n i t i o n .
F S w i t c h t h e i g n i t i o n o n a g a i n .
F Press button A immediately for a
f e w s e c o n d s .
F S w i t c h o f f t h e i g n i t i o n a n d
remove the remote control
key from the ignition lock. The
r e m o t e c o n t r o l i s n o w w o r k i n g
again.
Without central locking/
unlocking by hand
T h e k e y s a l s o a l l o w y o u t o u n l o c k /
l o c k t h e f r o n t d o o r s , t h e b o o t a n d t h e
f u e l i l l e r c a p .
With central locking/
unlocking
T h e k e y s a l l o w y o u t o l o c k o r u n l o c k
a l l o f t h e d o o r s a n d t h e t a i l g a t e , f r o m
the front doors.
If one of the doors or the tailgate is
o p e n , t h e c e n t r a l l o c k i n g d o e s n o t
w o r k . With central locking/
unlocking via the remote
control
Press button
A to lock the vehicle.
T h i s i s c o n i r m e d b y i x e d l i g h t i n g o f
the direction indicators for approxi-
m a t e l y t w o s e c o n d s .
Press button B to unlock the vehicle.
T h i s i s c o n i r m e d b y t h e r a p i d l a s h -
ing of the direction indicators.
Avoid pressing the buttons of your
remote control out of range of your
vehicle. You risk causing it not to
w o r k a n d t h e r e m o t e c o n t r o l w o u l d
then have to be reprogrammed (see
corresponding section).
Page 60 of 127
ACCESS
58 -
ELECTRONIC ENGINE
IMMOBILISER
This locks the engine control sys-
tem as soon as the ignition has been
s w i t c h e d o f f a n d t h e r e f o r e p r e v e n t s
s t a r t i n g o f t h e v e h i c l e b y a n y o n e w h o
does not have the key.
The ignition key has an electronic
c h i p w h i c h h a s a s p e c i a l c o d e . W h e n
t h e i g n i t i o n i s s w i t c h e d o n , t h e c o d e
must be recognised for starting to be
possible.
Make a careful note of the
number of each key. This
number is coded on the la-
bel attached to the key.
The high frequency remote control
i s a s e n s i t i v e s y s t e m ; d o n o t o p e r -
a t e i t w h i l e i t i s i n y o u r p o c k e t a s
there is a possibility that it may un-
l o c k t h e v e h i c l e , w i t h o u t y o u b e i n g
a w a r e o f i t .
The remote control does not oper-
a t e w h e n t h e k e y i s i n t h e i g n i t i o n ,
e v e n w h e n t h e i g n i t i o n i s s w i t c h e d
o f f , e x c e p t f o r r e p r o g r a m m i n g .
D r i v i n g w i t h t h e d o o r s l o c k e d m a y
make access to the passenger
compartment by the emergency
s e r v i c e s m o r e d i f i c u l t i n a n e m e r -
gency.
A s a s a f e t y p r e c a u t i o n ( w i t h c h i l d r e n
o n b o a r d ) , r e m o v e t h e k e y f r o m t h e
i g n i t i o n w h e n y o u l e a v e t h e v e h i c l e ,
even for a short time. Do not repeatedly press the buttons
of your remote control out of range
of your vehicle.
You run the risk of stopping it from
w o r k i n g a n d t h e r e m o t e c o n t r o l
w o u l d h a v e t o b e r e p r o g r a m m e d .
When purchasing a second-hand ve-
h i c l e , h a v e t h e k e y c o d e s m e m o r i s e d
b y a P E U G E O T d e a l e r , t o e n s u r e t h a t
the keys in your possession are the
o n l y o n e s w h i c h c a n s t a r t t h e v e h i c l e .
D o n o t m a k e a n y m o d i i c a t i o n s t o
the electronic engine immobiliser
system.
If the system does not function
correctly,
the central locking button
i n d i c a t o r l i g h t , s i t u a t e d i n t h e c e n t r e
o f t h e f a s c i a , l a s h e s r a p i d l y w h e n t h e
i g n i t i o n i s s w i t c h e d o n ( 2 n d n o t c h ) .
I n t h i s c a s e y o u r v e h i c l e w i l l n o t
start.
Contact a PEUGEOT dealer as soon
as possible. If the keys are lost
V i s i t a P E U G E O T d e a l e r w i t h t h e v e
-
h i c l e ' s V 5 r e g i s t r a t i o n c e r t i i c a t e a n d
y o u r p e r s o n a l i d e n t i i c a t i o n d o c u -
ments.
T h e P E U G E O T n e t w o r k w i l l b e a b l e
to retrieve the key code and the
transponder code to order a replace-
ment key.