Page 47 of 189
3
50
MIRRORS
- from outside:
lock the vehicle using the remote
control or the key.
Note : if the mirrors are folded using
switch A , they will not unfold when
the vehicle is unlocked using the
remote control or the key. Switch A
must be turned again. Manual interior mirror
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other,
push or pull the lever on the lower
edge of the mirror.
STEERING WHEEL HEIGHT AND DEPTH ADJUSTMENT
When the vehicle is stationary, unlock
the steering wheel by pulling handle
A .
Adjust the height and depth of the
steering wheel.
Lock it by pushing handle A down fully.
Demisting
To demist the mirrors, with the engine
running, press the rear screen
demisting button.
Folding
When parked, the mirrors can be
folded back manually.
I f y o u r v e h i c l e i s fi t t e d w i t h e l e c t r i c
folding:
- from inside:
with the ignition on, turn switch A
downwards. Objects observed in the
mirrors are, in reality, closer
than they appear.
Take this into account to
assess correctly the distance of
vehicles approaching from the rear.
Electric exterior mirrors
Adjustment
Turn switch A to the right or to the
left to select the corresponding
mirror.
Move this switch in all four
directions to adjust.
Return switch A to the centre
position.
Unfolding
When parked, the mirrors can be
unfolded manually.
I f y o u r v e h i c l e i s fi t t e d w i t h e l e c t r i c
unfolding:
- from inside:
with the ignition on, turn switch A
to the central position.
- from outside:
unlock the vehicle using the
remote control or the key.
The folding and unfolding of the
exterior mirrors can be deactivated
by a PEUGEOT dealer.
Page 48 of 189
3
51
FRONT SEATS
2 - Driver’s seat height adjustment
Pull the control upwards.
Take your weight off the seat to raise
it or press on the seat to lower it. 3 - Seat back angle adjustment
Turn the knob to adjust the angle of
the seat back.
1 - Forwards-backwards adjustment
Lift the control and slide the seat
forwards or backwards.
Page 49 of 189
3
52
4 - Access to the rear seats
If necessary, detach the seat belt
from the handle and position it along
the door pillar.
Lift the control A with one hand
and guide the movement of the
seat forwards with your other
hand (keeping the control in the
raised position).
The driver has a courtesy handle
B , located on the inner side of the
passenger seat, to enable him to tilt
the seat to allow a child into the rear,
for example.
When it is put back in place, the seat
returns to its initial position. 5 - Head restraint height and
angle adjustment
To raise the head restraint, pull it
upwards.
To lower it, it is necessary to push
simultaneously:
- the button, located on the left guide at the base of the head
restraint frame,
- the head restraint downwards.
No person or object should
prevent the seat from return-
i n g t o i t s i n i t i a l p o s i t i o n ; t h e
return to this position is nec-
essary in order for it to be
secured. T h e h e a d r e s t r a i n t i s fi t t e d w i t h a
frame which has notches which
p r e v e n t i t f r o m l o w e r i n g ; t h i s i s a n
impact safety device.
Never drive with the head
r e s t r a i n t s r e m o v e d ; t h e y m u s t
be in place and correctly
adjusted.
The adjustment is correct
when the upper edge of
the head restraint is level
with the top of the head. To adjust the angle of the head
restraint, tilt it.
To remove it, press the lug and pull
it upwards.
Page 90 of 189
5
89
HEADLAMP ADJUSTMENT
To avoid causing a nuisance to other
road users, the height of the head-
lamps should be adjusted in relation
to the load in the vehicle.
0. 1 or 2 people in the front seats.
- . 3 people.
1. 4 people.
2. 4 people + maximum authorised
load.
3. Driver + maximum authorised
load.
The initial setting is position "0" .
WINDSCREEN WIPER STALK
F r o n t w i n d s c r e e n w i p e r w i t h
a u t o m a t i c w i p e
2 Fast wipe (heavy rain).
1 Normal wipe (moderate
rain).
I Intermittent wipe.
0 Off.
AUTO Automatic or single wipe
(press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is
in proportion to the intensity of the
r a i n f a l l . T h e fi r s t p r e s s o f t h e s t a l k
downwards activates the automatic
wipe.
Subsequent presses trigger a single
wipe.
F r o n t w i n d s c r e e n w i p e r w i t h
i n t e r m i t t e n t w i p e
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe.
0 Off.
Single wipe (press downwards).
In the I ntermittent position, the wip-
ing speed is in proportion to the ve-
hicle speed.
Page 91 of 189
5
89
HEADLAMP ADJUSTMENT
To avoid causing a nuisance to other
road users, the height of the head-
lamps should be adjusted in relation
to the load in the vehicle.
0. 1 or 2 people in the front seats.
- . 3 people.
1. 4 people.
2. 4 people + maximum authorised
load.
3. Driver + maximum authorised
load.
The initial setting is position "0" .
WINDSCREEN WIPER STALK
F r o n t w i n d s c r e e n w i p e r w i t h
a u t o m a t i c w i p e
2 Fast wipe (heavy rain).
1 Normal wipe (moderate
rain).
I Intermittent wipe.
0 Off.
AUTO Automatic or single wipe
(press downwards).
In the I ntermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In AUTO mode, the wiping speed is
in proportion to the intensity of the
r a i n f a l l . T h e fi r s t p r e s s o f t h e s t a l k
downwards activates the automatic
wipe.
Subsequent presses trigger a single
wipe.
F r o n t w i n d s c r e e n w i p e r w i t h
i n t e r m i t t e n t w i p e
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe.
0 Off.
Single wipe (press downwards).
In the I ntermittent position, the wip-
ing speed is in proportion to the ve-
hicle speed.
