2008 PEUGEOT 1007 steering
[x] Cancel search: steeringPage 112 of 189
7
105
Steering wheel controls
This system’s controls are grouped
together on lever A .
1. Speed limiter mode selection dial
2. Value decrease button
3. Value increase button
4. Speed limiter on/off button Instrument panel display
The programmed information is grou-
ped together on the instrument panel
display.
5. Speed limiter on/off indication
6. Speed limiter mode selection
indication
7. Programmed speed value
SPEED LIMITER
This speed limiter, of the new gene-
ration, has a display on the instrument
panel to indicate the programmed
speed.
It prevents exceeding of the vehicle
speed programmed by the driver.
When the programmed speed is
reached, pressing the accelerator
pedal no longer has any effect.
The limiter operates with a pro-
grammed speed of at least 18 mph
( 3 0 k m / h ) ; i t r e m a i n s a c t i v e r e g a r d -
less of any action on the brake and
clutch pedals.
The speed limiter is switched on
manually: it requires a programmed
s p e e d o f a t l e a s t 1 8 m p h ( 3 0 k m / h ) .
The speed limiter is switched off by
manual operation of the control.
By pressing the accelerator pedal
fi r m l y , p a s s i n g t h e p o i n t o f r e s i s -
tance, it is possible to exceed the
programmed speed temporarily.
To return to the programmed speed,
simply slow down to a speed below
the programmed speed.
The programmed speed value re-
mains in the memory when the igni-
tion is switched off.
Page 114 of 189
7
1 0 7
CRUISE CONTROL
This cruise control, of the new gene-
ration, is linked with the speed limiter. It
has a display on the instrument panel
to indicate the memorised reference
speed.
It enables the vehicle to maintain a
steady speed programmed by the
driver.
The cruise control is switched on
manually: it requires a minimum
v e h i c l e s p e e d o f 2 5 m p h ( 4 0 k m / h )
and fourth gear must be engaged on
the manual gearbox.
The cruise control is switched off
by means of a manual action or by
pressing the brake or clutch pedal or
in the event of activation of the ESP.
By pressing the accelerator pedal, it is
possible to exceed the programmed
speed temporarily.
To return to the programmed speed,
simply release the accelerator pedal.
Switching off the ignition or turning
the dial cancels any programmed
speed value. Instrument panel display
The programmed information is grou-
ped together on the instrument panel
display.
5. Cruise control on/off indication
6. Cruise control mode selection
indication
7. Programmed speed value
Steering wheel controls
This system’s controls are grouped
together on lever
A .
1. Cruise control mode selection dial
2. Value decrease button
3. Value increase button
4. Cruise control on/off button
Page 131 of 189
9
124
Fuse N° Rating
Functions
1 15 A Rear wiper.
3 5 A Air bags and pre-tensioners control unit.
4 10 A Diagnostic socket - Clutch switch - Steering wheel angle sensor
-
P a r t i c l e e m i s s i o n fi l t e r p u m p .
5 30 A Electric windows - Sunroof.
6 - Not used.
7 5 A Courtesy light - Glove box light.
8 20 A T y r e u n d e r - i n fl a t i o n d e t e c t i o n c o n t r o l u n i t - F o l d i n g o f t
h e e l e c t r i c m i r r o r s - A l a r m s i r e n -
Multifunction display - Alarm control unit - Audio equipment - Aud io/telephone.
9 30 A Audio equipment - Lighter/12 V socket (100 W max.).
10 15 A Steering wheel controls.
11 15 A Diagnostic socket - Low current ignition switch - Motorised strik ers.
12 15 A Air bags and pre-tensioners control unit - Rain/brightness sens or.
13 5 A ABS relay - Speed sensor - Engine Fuse Box - "2 Tronic" gear lever - Brake switch.
14 15 A Parking assistance control unit - "Sesame" doors control unit and swit
ches -
Instrument panel - Seat belt warning lights bar - Air condition ing control panel -
Headlamp adjustment - Hands-free kit.
15 30 A Locking - Deadlocking - Unlocking.
17 40 A Rear screen and exterior mirrors demisting.
SH - PARC shunt.
Page 132 of 189
9
125
Engine compartment fuse box
Unclip the cover to gain access
to the fuses. Your vehicle's electrical sys-
tem is designed to operate
with standard or optional
equipment.
Once the work has been carried out,
close the cover very carefully.
** The maxi fuses provide addi-tional protection for the electrical
systems. All work must be car-
ried out by a PEUGEOT dealer.
Fuse N° Rating Functions
MF1 ** 50 A Fan assembly.
MF2 ** 30 A ABS/ESP control unit.
MF3 ** 30 A ABS/ESP control unit.
MF4 ** 60 A Built-in Systems Interface supply.
MF5 ** 60 A Built-in Systems Interface supply.
MF6 ** 30 A "2 Tronic" gearbox control unit.
MF7 ** 80 A Passenger compartment fuse box -
"Sesame" doors control unit.
MF8 ** 80 A Electric power steering. Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT dealer.
Some electrical accessories or the
w a y i n w h i c h t h e y a r e fi t t e d m a y h a v e
damaging effects on the operation of
your vehicle (audio, control and elec-
trical load circuits).
PEUGEOT will not accept responsi-
bility for the cost incurred in repairing
your vehicle or for rectifying malfunc-
tions resulting from the installation
of auxiliary accessories not supplied
and not recommended by PEUGEOT
and not installed in accordance with
its instructions, in particular where
the equipment in question consumes
more than 10 milliamperes.
Page 133 of 189
9
126
Fuse N° Rating
Functions
1 20 A Engine control unit and fan assembly control supply - Injection
control unit (Diesel) -
I n j e c t i o n p u m p ( D i e s e l ) - A i r h e a t i n g s o l e n o i d v a l v e s ( D i e s e l ) - A i r fl o w s e n s o r ( D i e s e l ) .
2 15 A Horn.
3 10 A Front and rear wash-wipe pump.
4 20 A Headlamp wash pump.
5 15 A Fuel pump (petrol).
6 10 A Power steering control unit - Water in diesel sensor - Vehicl e speed sensor.
7 10 A Switching and protection unit (Diesel) - Engine coolant l evel detector (Diesel).
8 25 A Starter.
9 10 A ABS/ESP control unit - ABS cut-off relay - Brake switch.
10 30 A Engine control unit actuators (petrol: ignition coils, oxygen
sensors, injectors,
purge canister and variable timing solenoid valves, controlled t hermostat)
( D i e s e l : i n j e c t i o n c o n t r o l u n i t , a i r fl o w s e n s o r , i n j e c t i o n p u m p , d i e s e l h i g h p r e s s u r e
regulator, EGR and Turbo pressure regulation solenoid valves) - Blow-by heaters -
Diesel heater.
11 40 A Air blowers.
12 30 A Windscreen wipers (low/high speed).
13 40 A (Ignition positive) Built-In Systems Interface.
14 - Not used.
15 10 A Right main beam headlamp.
16 10 A Left main beam headlamp.
17 15 A Left dipped headlamp.
18 15 A Right dipped headlamp.
Page 167 of 189
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 #
ESC
MENU LIST
ESC
MENU LIST
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0
#
D
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0 #
D
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0 #
11
22
33
44
5 5
66
D
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0 #D
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0 #
D
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0 #
06
160
TELEPHONE
CALLING A CONTACT
Turn the dial and select the DIAL
function. Press the PICK UP button to display
the superimposed telephone menu.
P r e s s t h e d i a l t o c o n fi r m t h e s e l e c t i o n .
Dial the telephone number of your
contact using the alphanumeric
keypad. Press the PICK UP button to call the
number dialled.
Press the HANG UP button to end
the call.
ACCEPTING OR REFUSING A CALL Press the PICK UP button to accept
a call.
Press the HANG UP button to refuse
a call.
DIAL
Press the end of the steering wheel stalk for more
than 2 seconds to access the telephone menu:
calls log, directory, voice mailbox.
Page 169 of 189
07
162
RADIO: selection of the previous stored station.
MP3/JUKEBOX: selection of the previous directory.
CD CHANGER: selection of the previous CD.
Selection of the previous item on a menu.
RADIO: selection of the next stored station.
MP3/JUKEBOX: selection of the next directory.
CD CHANGER: selection of the next CD.
Selection of the next item on a menu. RADIO: automatic search for a higher frequency.
CD/MP3/JUKEBOX/CD CHANGER: selection of the
next track.
CD/CD CHANGER: continuous press: fast forwards
play.
RADIO: automatic search for a lower frequency.
CD/MP3/JUKEBOX/CD CHANGER: selection of the
previous track.
CD/CD CHANGER: continuous press: fast backwards pl ay.
- Change of sound source.
- C o n fi r m a t i o n o f a s e l e c t i o n .
- Pick up/Hang up the telephone.
- Press for more than 2 seconds:
access to the telephone menu.
Volume increase.
Volume decrease.
C O N T R O L S H O R T - C U T S
STEERING WHEEL CONTROLS
Mute: by pressing the volume
increase and decrease
buttons simultaneously.
The sound is restored by
pressing one of the two
volume buttons.
Page 185 of 189
11
22
33
11
22
44
11
04
175
H A N D S - F R E E K I T
MATCHING A TELEPHONE DISPLAY C
Select the accessory which corresponds to the
n a m e o f t h e v e h i c l e , a s u p e r i m p o s e d c o n fi g u r a t i o n
display appears on the multifunction display. Activate the telephone's Bluetooth function and
carry out a search of the Bluetooth accessories
present for the telephone.
Select the YES tab on the display
u s i n g t h e b u t t o n s t h e n c o n fi r m b y
pressing OK.
E n t e r t h e v e h i c l e ' s a u t h e n t i c a t i o n c o d e ( = 1 2 3 4 ) .
Depending on the telephone, you may be asked
to enter this code before the superimposed
c o n fi g u r a t i o n d i s p l a y a p p e a r s .
YES
YES
The services offered by the hands-free kit depend
on the network, the SIM
card and the compatibility of the Bluetooth equipme nt used.
C o n s u l t y o u r t e l e p h o n e ' s m a n u a l a n d y o u r o p e r a t o r t o fi n d o u t w h i c h
services are available to you. A list of mobile tel ephones which offer the
best range of services is available from the networ k. Contact a PEUGEOT
dealer.
R E C E I V I N G A C A L L
An incoming call is announced by a ring and a supe rimposed display
on the multifunction display.
Select the YES tab on the display
u s i n g t h e b u t t o n s a n d c o n fi r m b y
pressing OK.
Press the end of the steering wheel stalk to accep t
the call.
Press the end of the steering wheel stalk for more
than two seconds to access your directory.
To dial a number, use the keypad on your
telephone. MAKING A CALL
For safety reasons and because they require prolon
ged attention
on the part of the driver, the operations for match ing of the
Bluetooth mobile telephone with the RD4 hands-free kit must be
carried out with the vehicle stationary and the ign ition on.