2008 PEUGEOT 1007 DAG ECO mode

7
106
Operating fault
If a speed limiter malfunction occurs,
the speed is replaced by fl ashing
dashes. Contact a PEUGEOT dealer
to have the system checked.
Activating/deactivating the limiter

 Switch the speed limiter on by
pressing button 4 .
Programming

 Place the dial 1 in the LIMIT posi-
tion. The limiter is not yet active.
By default, the display indicates
the last speed programmed: Return to normal driving

 Turn dial 1 to position "0" : the
speed limiter mode is deselected.
The display returns to the dis-
tance recorder.
In the event of a steep de-
scent or sharp acceleration,
the speed limiter will not be
able to prevent the vehicle
from exceeding the pro-
grammed speed.
In any event, the speed limiter cannot
replace the need to observe speed
limits, nor can it replace the need for
vigilance and responsibility on the
part of the driver.
The driver must remain alert and stay
in complete control of his vehicle.
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned correctly.
- never fi t one mat on top of another.

 Set the speed value by press-
ing button 2 or 3 (e.g.: 70 mph
(110 km/h)).
You can then change the programmed
speed using buttons 2 and 3 :
- by + or - 1 mph (1 km/h) = short press,
-
by + or - 5 mph (5 km/h) = long press,
- in steps of + or - 5 mph (5 km/h) = maintained press. Exceeding the programmed
speed
Pressing the accelerator pedal to
exceed the programmed speed will
not have any effect, unless you press
the pedal
fi rmly passing the point of
resistance .
The speed limiter is deactivated tem-
porarily and the programmed speed,
which is still displayed, fl ashes.
Returning to the programmed speed,
by means of intentional or uninten-
tional deceleration of the vehicle,
cancels the fl ashing automatically
and reactivates the speed limiter.

 Switch the speed limiter off by
pressing button 4 : the display
confi rms that it is off (OFF).

 Switch the speed limiter back on
by pressing button 4 again.

7
108
Exceeding the programmed speed
Intentional or unintentional exceeding
of the programmed speed results in
fl ashing of the programmed speed
on the display.
Returning to the programmed speed,
by means of intentional or uninten-
tional deceleration of the vehicle,
cancels the fl ashing automatically.
Using the accelerator:

 exceed the memorised speed until
the required speed is reached,

 press button 2 or 3 .
Programming

 Place switch 1 in the CRUISE
position. The cruise control is
not yet active and no speed has
been memorised. The display
indicates: Cancelling the cruise control

 Switch the cruise control off by
pressing button 4 : the display
confi rms that it is off (OFF).
When changing the memo-
rised reference speed by
means of a maintained
press, pay attention as
the speed can increase or
decrease rapidly.
Do not use the cruise control on slip-
pery roads or in heavy traffi c.
In the event of a steep slope, the
cruise control cannot prevent the
vehicle from exceeding the pro-
grammed speed.
In any event, the cruise control can-
not replace the need to comply with
speed limits, nor can it replace the
need for vigilance and responsibility
on the part of the driver.
To prevent the mat from becoming
caught under the pedals:
- ensure that the mat is positioned correctly.
- never fi t one mat on top of another.
It is advisable to keep your feet near
the pedals.

 Set the programmed speed by
accelerating to the required
speed, then press button 2 or 3
(e.g.: 70 mph (110 km/h)).
Return to normal driving

 Turn dial 1 to position "0" : the
cruise control mode is dese-
lected. The display returns to the
distance recorder. Operating fault
If a cruise control malfunction occurs,
the speed is replaced by fl ashing
dashes. Contact a PEUGEOT dealer
to have the system checked.
You can then change the programmed
speed using buttons 2 and 3 :
- by + or - 1 mph (1 km/h) = short press,
-
by + or - 5 mph (5 km/h) = long press,
- in steps of + or - 5 mph (5 km/h) = maintained press. Reactivating the cruise control

 Switch the cruise control back on
by pressing button 4 again.

9
127
CHANGING A WINDSCREEN WIPER BLADE
Changing a front wiper blade

 Lift the wiper arm.

 Unclip the blade and remove it.

 Fit the new blade.

 Push back the wiper arm.

Note: the shortest blade is fi tted on
the right-hand wiper arm.
Changing the rear wiper blade

 Lift the wiper arm.

 Unclip the blade and remove it.

 Fit the new blade.

 Push back the wiper arm.
ECONOMY MODE FUNCTION
After the engine has stopped, certain
functions (doors, windscreen wipers,
electric windows, courtesy light, audio
equipment, dipped headlamps, etc.)

can only be used for a cumulative
duration of thirty minutes, to prevent
discharging of the battery.
Once the thirty minutes are over, a
message informing you of the switch
to economy mode appears on the
multifunction display and the active
functions are put on standby.
These functions are reactivated
automatically next time the vehicle is
driven.
To resume the use of these functions
immediately, start the engine and let
it run for a few minutes.
The time available to you will then be
double the duration for which the en-
gine is left running. However, this pe-
riod will always be between fi ve and
thirty minutes.

Note: if the telephone is being used
when economy mode starts, it will
still be possible to fi nish the call.
A fl at battery will prevent the
engine from starting.
FITTING/REMOVING THE MAT
When removing the mat on the dri-
ver's side, push the seat as far back
as possible and remove the fi xings.
When refi tting, position the mat
correctly on the pins and clip the
fi xings. Check that the mat is secured
correctly.
To prevent the mat from becoming
caught under the pedals:
- only use mats suited to the fi xings already present in the
vehicle. It is imperative that these
fi xings are used.
- never fi t one mat on top of another.
Placing the wiper blades in the
special position


Less than a minute after switching
off the ignition, operate the wip-
ers stalk to position the wiper
blades in the centre of the wind-
screen.

To return the windscreen wipers
to their normal position, switch on
the ignition and operate the wipers
stalk.

167
4
3
4
5
5
5
5
4
4
4
3
4
3
4
4
3
3
3
3
2
5
5
1
2
3
4
3
3
3
3
3
2
3
3
3
2
4
4
2
4
3
4
4
4
3
4
4
3
3
4
4
4
4
4
4
5
5
5
5
2
3
5
5
5
3 multiple selection
current album
current track
JUKEBOX jukebox management
jukebox confi guration hi-fi (320 kbps)
high (192 kbps)

normal (128 kbps)
delete jukebox data
PLAYLIST MANAGEMENT
TELEMATICS
CALL call list
dial

directory

mailbox

services
customer contact centre
PEUGEOT assistance
messages received DIRECTORY
managing directory fi les consult or modify a fi le
add a fi le
delete a fi le
delete all fi les
confi gure directory select a directory
name directory
select starting directory
fi le transfer
exchange by infrared
send all records
send one record
receive by infrared

exchange with SIM card
send all records to SIM
send one record to SIM
receive all SIM fi les
receive a SIM fi le
TEXT MESSAGES (SMS)
read received text messages send a text message
write a text message
delete list of text messages
TELEPHONE FUNCTIONS
network
network search mode
automatic mode
manual mode
networks available
length of calls zero reset
manage PIN code activate/deactivate
save PIN number
modify PIN code
call options confi gure calls
display my number
automatic reply after x ring(s)
ring options
for voice calls
for text messages (SMS)

168
1
2
3
3
3
3
2
3
3
4
4
1
3
2
3
1
2
3
3
2
2
2
1
2
2
2
1
1
4
3
2
2
3
3
6
1
Each audio source (Radio, CD, MP3,
Jukebox, CD changer) has its own
separate settings.
text message ring
CONFIGURATION DISPLAY CONFIGURATION choose colour
adjust luminosity
set date and time
select units
SOUND voice commands setting
speech synthesis setting
guidance instructions volume
other message volume
select female/male voice
activate/deactivate auxiliary source
* The parameters vary according to vehicle (refer to the "Multifunction displays" chapter).
SELECT LANGUAGE
DEFINE VEHICLE PARAMETERS * VIDEO
ACTIVATE VIDEO MODE
VIDEO PARAMETERS
display formats
adjust luminosity
set colours
set contrasts
VEHICLE DIAGNOSTICS Press the MENU button for more
than 2 seconds to gain access to
the next fl ow chart.
ALERT LOG
STATUS OF FUNCTIONS *
RESET TYRE PRESS. DETEC. SYS. * VOICE COMMANDS LIST
AUDIO/TELEPHONE DIAGNOSTICS
GPS COVERAGE
UNIT BACKUP POWER
UNIT DESCRIPTION
NAVIGATION DEMONSTRATION
SERVICES CONFIGURATION
Press the Music button several
times in succession to access
the following settings.
MUSICAL AMBIENCE
BASS
TREBLE
LOUDNESS CORRECTION
FR-RR BALANCE
LH-RH BALANCE
AUTO VOLUME CORRECTION
Flow chart version 7.0
call diversion to mailbox n°
delete calls log

183
There is a difference in
sound quality between
the different audio
sources (radio, CD,
CD changer...). Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to
the sources listened to. It is advisable to set
the AUDIO functions (Bass, Treble, Front-Rear
Balance, Left-Right Balance) to the middle
position, select the musical ambience "None"
and set the loudness correction to the "Active"
position in CD mode or to the "Inactive" position
in radio mode.
For optimum sound quality, the audio settings (Vol
ume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources,
which may result in audible differences when changi ng source (radio, CD,
CD changer...).
The CD is ejected
automatically or is not
played by the player. - Check that the CD is inserted in the player t
he
right way up.
- Check the condition of the CD: the CD cannot be played if it is too damaged.
- Check the content in the case of a recorded CD: consult the advice in the Audio section.
- The audio equipment's CD player does not play DVDs.
- Due to inadequate quality, certain recorded CDs will not be played by the audio system.
- The CD changer does not play MP3 CDs.
The CD is inserted upside down, is unplayable, doe
s not contain any audio
data or contains an audio format which the player c annot play.
The CD is protected by an anti-pirating protection system which is not
recognised by the audio equipment.
The CD player sound
is poor. Insert good quality CDs and store them in
suitable conditions.
The CD used is scratched or of poor quality.
The audio equipment settings (bass, treble, ambien
ces) are unsuitable.
Set the treble or bass level to 0, without selecti ng
an ambience.
The table below groups together the answers to the
most frequently asked questions concerning the WIP Sound and the WIP Com.
QUESTION SOLUTION
RESPONSE
FREQUENTLY ASKED QUESTIONS

184
The traffi c announcement
(TA) is displayed. I do
not receive any traffi c
information. Tune to a radio station which broadcasts traffi c
information.
The radio station is not part of the regional traf
fi c information network.
QUESTION
SOLUTION
RESPONSE
The quality of reception
of the radio station
listened to gradually
deteriorates or the
stored stations do
not function (no
sound, 87.5 Mhz is
displayed...). The vehicle is too far from the transmitter used b
y the station listened to or
there is no transmitter in the geographical area th rough which the vehicle
is travelling.
The environment (hills, buildings, tunnels, baseme nt car parks...) block
reception, including in RDS mode.
The aerial is absent or has been damaged (for exam ple when going
through a car wash or into an underground car park) . Activate the RDS function to enable the system
to check whether there is a more powerful
transmitter in the geographical area.
This phenomenon is normal and does not
indicate a failure of the audio equipment.
Have the aerial checked by a PEUGEOT dealer.
Sound cut-outs of 1
to 2 seconds in radio
mode. During this brief sound cut-out, the RDS searches
for any frequency
permitting better reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
With the engine off,
the audio equipment
switches off after a few
minutes of use. When the engine is switched off, the audio equipme
nt operating time
depends on the battery charge.
The switch-off is normal: the audio equipment swit ches to economy mode
and switches off to prevent discharging of the vehi cle's battery. Start the vehicle's engine to increase the battery
charge.
The stored stations do
not function (no sound,
87.5 Mhz is displayed...)
An incorrect waveband is selected.
Press the BAND AST button to return to the
waveband (AM, FM1, FM2, FMAST) on which the
stations are stored.
The message "the audio
system is overheated"
appears on the display. Switch the audio system off for a few minutes to
allow the system to cool.
In order to protect the installation if the surrou
nding temperature is too
high, the audio equipment switches to an automatic thermal protection
mode leading to a reduction of the volume or stoppi ng of the playing of the
CD.

172
22
33
44
11
22
44
33
11
03 AUDIO
Press the SOURCE button several times in succession and select the radio.
Press the BAND AST button to select a waveband: FM1, FM2, FMast, AM.
Briefl y press one of the buttons to carry out an automatic search of the radio stations.
Press one of the buttons to carry out a manual search of the radio stations.
Press the LIST REFRESH button to display the list of stations received locally (30 stations maximum). To update this list, press for more than two seconds.
Select ACTIVATE FREQUENCY
FOLLOWING (RDS) then press OK.
RDS appears on the display.
Select the FM WAVEBAND
PREFERENCES function then press
OK.
Select AUDIO FUNCTIONS then
press OK.
Press the MENU button.
FM WAVEBAND PREFERENCES
ACTIVATE FREQUENCY FOLLOWING (RDS)
The external environment (hills, buildings, tunnel
s, basement car parks) may block reception, includi ng
in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not
indicate any failure of the audio equipment.
RDS
The RDS, if displayed, enables you to continue l istening to the
same station by means of frequency following. Howev er, in certain
conditions, this RDS station is not followed throug hout the country
as radio stations do not cover 100 % of the territo ry. This explains
the loss of reception of the station during a journ ey.
RADIO
SELECTING A STATION