2008 NISSAN TITAN position

Black plate (118,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2819
3. Highlight [Nearby Places] and push
.
NAV2820
4. Highlight the preferred destination Points of
Interest and push.
A list screen is displayed.
INFO:
If there are any particular Points of Interest
that you intend to use frequently, you can
store them in the list of nearby Points of
Interest.
“CUSTOMIZING NEARBY PLACES”
(page 6-33)
NAV2821
5. Highlight the preferred destination from the
list, and push.
The position of the selected location is
displayed in the preview on the right side
of the screen.
4-46Setting a destination

Black plate (164,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
Locations that you often visit can be stored in
the Address Book. The stored locations can be
easily retrieved to set them as a destination or
waypoint.
INFO:
.The Address Book can store up to 100
locations.
.New information placed in the same storage
position will overwrite the old data.
STORING A LOCATION BY SEARCH-
ING
After you have searched for a location as
previously described, you can store the location
for future use.
1. Push.
NAV3055Maxima, Quest, Titan
NAV3029350Z
2. Highlight [Navigation] and push.
STORING A LOCATION
6-2Storing a location/route

Black plate (167,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2924
STORING THE CURRENT VEHICLE
LOCATION
1. Pushat the current vehicle
location.
NAV2925
2. Highlight [Store Location] and push
.
A message is displayed, and the current
vehicle location is stored in the Address
Book.
INFO:
The location is stored in the first available
position number in the Address Book list.
NAV2926
3. Push

Black plate (168,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2927
STORING A LOCATION BY MOVING
THE MAP
1. Move to the preferred location on the map
and push.
NAV2928
2. Highlight [Store Location] and push
.
A message is displayed, and the location is
stored in the Address Book.
INFO:
The location is stored in the first available
position number in the Address Book list.
NAV2929
3. Push

Black plate (175,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV2946
4. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push.
The current route is stored.
NAV2947
INFO:
You can also store a route using the following
procedure.
1) Push.
2) Highlight [Navigation] and push.
3) Highlight [Address Book] and push
.
4)Highlight[StoredRoutes]andpush
.
5) Highlight [None (Add New)] and push
.
INFO:
.The route is stored in the first available
position number in the store current route
list.
.A maximum of 5 routes can be stored.
“DELETING A STORED ITEM”
(page 6-28)
.If you have not set any waypoints on the
route, the route cannot be stored.
Storing a location/route6-13

Black plate (176,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
You can store the route you have traveled up to
the current location. A maximum of 5 tracked
routes can be stored.
A tracked route must not exceed 12 miles (20
km) in distance.
The stored tracked route can be displayed on
the map as necessary.
1. Push.
NAV2948
2. Highlight [Store Tracking] and push
.
INFO:
A maximum of 5 tracked routes can be
stored.
“DELETING A STORED ITEM”
(page 6-28)
NAV2949
3. A confirmation message is displayed.
Confirm the contents of the message, high-
light [Yes] and push.
The tracked route you have traveled is
stored.
4. Push

Black plate (186,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
NAV3095
Entry Number (only for stored locations)
Swaps the position numbers of any two stored
locations in the list.
1. Highlight [Entry Number] and push
.
A list of stored locations is displayed.
NAV3096
2. Highlight the stored locations you want to
swap and push.
The position numbers of the selected stored
locations are swapped.
6-24Storing a location/route

Black plate (202,1)
Model "NISSAN_NAVI" EDITED: 2007/ 2/ 26
This allows you to display GPS information, such
as the positioning status, latitude/longitude,
altitude and satellite locations.
BASIC OPERATION
Maxima, Quest, Titan:
1. Push.
2. Highlight [Navigation] and push.
3. Highlight [GPS Satellite Info] and push
.
4. Pushto return to the previous
screen.
Push