2008 NISSAN SENTRA light

[x] Cancel search: light

Page 267 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual PASSENGER COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equ

Page 270 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual 4. Close the lid securely as illustratedsCsD.
5. Operate the buttons to check the operation.
See a NISSAN dealer if you need assistance for
replacement.
FCC Notice:
Changes or modifications not expres

Page 271 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual cUse the same number and wattage as
originally installed:
Low beam:
Wattage: 55
Bulb no.: H13*
High beam:
Wattage: 65
Bulb no.: H13*
*: Always check with the Parts Depart-
ment at a NISSAN dealer for

Page 272 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual 1. Front map lights
2. Room light
3. Headlight assembly
4. Front fog light (if so equipped)
5. High-mounted stop light (if so
equipped)
6. Spoiler mounted stop light (if so
equipped)
7. License plate

Page 273 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual Replacement procedures
All other lights are either type A, B, C or D. When
replacing a bulb, first remove the lens and/or
cover.
Use a cloth
s1to protect the interior light hous-
ing.Use a clothsAto p

Page 274 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual If you have a flat tire, see the “In case of
emergency” section of this manual.
TIRE PRESSURE
Tire Pressure Monitoring System
(TPMS) (if so equipped)
This vehicle is equipped with the Tire
Pressur

Page 283 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual Replacing wheels and tires
When replacing a tire, use the same size, tread
design, speed rating and load carrying capacity
as originally equipped. Recommended types and
sizes are shown in “Wheels an

Page 286 of 328

NISSAN SENTRA 2008 B16 / 6.G Owners Manual The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to