2008 NISSAN MAXIMA warning

[x] Cancel search: warning

Page 134 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual s1Pull the hood lock release handle located
below the driver side instrument panel. The
hood will spring up slightly.
s2Push the lever at the front of the hood to the
side as illustrated with your fin

Page 135 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual TRUNK LID RELEASE SWITCH
The trunk lid release switch is located below the
armrest of the driver’s door trim panel. To open
the trunk lid, pull the trunk lid release switch.
To close the trunk lid,

Page 137 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual WARNING
cGasoline is extremely flammable and
highly explosive under certain condi-
tions. You could be burned or seriously
injured if it is misused or mishandled.
Always stop the engine and do not
smo

Page 138 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual WARNING
Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accident.
CAUTION
Do not adjust the steering wheel any
closer to you than is necessary for p

Page 142 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual WARNING
cObjects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. Use the inside mir

Page 147 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual 4 Display screen, heater, air conditioner,
audio and phone systems
Control panel buttons — with monochrome screen....4-2
How to use the TRIP INFO button................4-3
Clock.....................

Page 148 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual WARNING
cDo not disassemble or modify this sys-
tem. If you do, it may result in accidents,
fire, or electrical shock.
cDo not use this system if you notice any
abnormality, such as a frozen screen or

Page 151 of 328

NISSAN MAXIMA 2008 A34 / 6.G Owners Manual CLOCK
The digital clock displays the time when the igni-
tion key is in OFF, ACC or ON.
If the power supply is disconnected, the
clock will not indicate the correct time.
Readjust the time.
Adjusting