2008 NISSAN FRONTIER engine

[x] Cancel search: engine

Page 285 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual ENGINE COMPARTMENT
CAUTION
Never use a fuse of a higher or lower
amperage rating than specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipm

Page 288 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual This device complies with Part 15 of the
FCC Rules and RSS-210 of Industry
Canada.
Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) thi

Page 305 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual 9 Technical and consumer information
Capacities and recommended fuel/lubricants.........9-2
Fuel recommendation...........................9-3
Engine oil and oil filter recommendations..........9-5
Air

Page 306 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to

Page 307 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual FUEL RECOMMENDATION
For 2.5L engine.
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) num-
ber (Research octane number 91) .
For 4.0L engine.
NISSAN recommends

Page 308 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual If any driveability problems such as engine stall-
ing and difficult hot-starting are experienced after
using oxygenate-blend fuels, immediately
change to a non-oxygenate fuel or a fuel with a
low ble

Page 309 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual ENGINE OIL AND OIL FILTER
RECOMMENDATIONS
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. Se

Page 311 of 352

NISSAN FRONTIER 2008 D22 / 1.G Owners Manual ENGINE
ModelQR25DE VQ40DE
TypeGasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC
Cylinder arrangement 4-cylinder in-line 6-cylinder, V-block, Slanted at 60°
Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0