2008 NISSAN ARMADA ignition

[x] Cancel search: ignition

Page 108 of 456

NISSAN ARMADA 2008 1.G Owners Manual Door and liftgate open warning
This warning illuminates when a door, the liftgate
or the liftgate glass has been opened when the
engine is running.
Lock warning
This warning illuminates and a chime so

Page 109 of 456

NISSAN ARMADA 2008 1.G Owners Manual Intelligent Key battery discharge indicator
This indicator illuminates when the Intelligent Key
battery is running out of power.
If this indicator illuminates, replace the battery
with a new one. See

Page 110 of 456

NISSAN ARMADA 2008 1.G Owners Manual brief period. Never leave your keys in the ignition,
and always lock the vehicle when unattended. Be
aware of your surroundings, and park in secure,
well-lit areas whenever possible.
Many devices offe

Page 111 of 456

NISSAN ARMADA 2008 1.G Owners Manual The alarm is activated by:
copening a door without using the key, a
request switch, keyfob or Intelligent Key
(even if the door is unlocked by using the
inside lock knob or the power door lock
switch)

Page 112 of 456

NISSAN ARMADA 2008 1.G Owners Manual SWITCH OPERATION
The windshield wiper and washer operates when
the ignition switch is in the ON position.
Push the lever down to operate the wiper at the
following speed:
s1Intermittent (INT) — inte

Page 113 of 456

NISSAN ARMADA 2008 1.G Owners Manual The rear window wiper and washer operate when
the ignition switch is in the ON position.
Turn the switch clockwise from the OFF position
to operate the wiper.
s1Intermittent (INT) – intermittent ope

Page 115 of 456

NISSAN ARMADA 2008 1.G Owners Manual Autolight system
The autolight system allows the headlights to be
set so they turn on and off automatically. The
autolight system can:
cTurn on the headlights, front parking, tail,
license plate and i

Page 116 of 456

NISSAN ARMADA 2008 1.G Owners Manual Headlight beam select
s1To select the high beam function, push the
lever forward. The high beam lights come on
and the
light illuminates.
s2Pull the lever back to select the low beam.
s3Pulling and re