2008 MITSUBISHI LANCER EVOLUTION X audio

MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
TSB Revision
CIRCUIT DIAGRAMS90-188
MITSUBISHI MULTI-COMMUNICATION SYSTEM (MMCS) (CONTINUED)
COMBINATION
METER
INTERFACE
CIRCUITCAN TRANSCEIVER
CIRCUIT CPU (FUSE )
9
RHEOSTATTONE
ALARM INTERFACE
CIRCUIT
AUDIO VISUAL NAVIGATION UNIT
·AIR CONDITIONING
SYSTEM
·AUTO-CRUISE
CONTROL SYSTEM
·CLOCK
·HANDS FREE
SYSTEM
·INVECS-III CVT
·TURN-SIGNAL
LIGHT AND
HAZARD WARNING
LIGHT:
·AIR CONDITIONING
SYSTEM
·INVECS-III CVT
·TURN-SIGNAL
LIGHT AND
HAZARD WARNING
LIGHT: NOTEJOINT CONNECTOR (3)

MITSUBISHI MULTI COMMUNICATION SYSTEM (MMCS)
TSB Revision
CIRCUIT DIAGRAMS90-190
MITSUBISHI MULTI-COMMUNICATION SYSTEM (MMCS) (CONTINUED)
AUDIO AMPLIFIER
AUDIO VISUAL NAVIGATION UNIT

INSTRUMENT PANEL ASSEMBLY
TSB Revision
INTERIOR52A-3
CAUTION
•Refer to GROUP 52B-SRS Service Precautions P.52B-24 and Air bag Module and Clock Spring
P.52B-367 before removing the passenger side air bag module.
•Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel.
Pre-removal and Post-installation Operation
•Removal and Installation of Front Pillar Trim (Refer to P.52A-10).
•Removal and Installation of Instrument Under Cover
(Refer to P.52A-10).
•Removal and Installation of Glove Box (Refer to P.52A-10).
•Removal and Installation of Instrument Cover Lower, Air
Outlet Garnish (Refer to P.52A-10).
•Removal and Installation of Audio Unit (Refer to GROUP
54A, Radio with CD Player P.54A-307).
•Removal and Installation of Audio Visual Navigation Unit,
GPS antenna (Refer to GROUP 54A, MMCS P.54A-391).
•Removal and Installation of Steering shaft (Refer to
GROUP 37, Steering Column Shaft P.37-25).
•Removal and Installation of Hands-free Cellular Phone
System (Refer to GROUP 54A, Hands-free Module
P.54A-435).
•Removal and Installation of Sensors (Refer to GROUP
55B, Interior Temperature Sensor
P.55B-25).

STEERING WHEEL
POWER STEERING37-3
CONSTRUCTION DIAGRAM
STEERING WHEELM2370001000761
The steering wheel is designed to improve operabil-
ity, safety and maintainability and has the following
features:
•Newly designed Three-spoke type has been
adopted. For DE and ES, the steering wheel
made of urethane has been adopted. For GTS,
the steering wheel made of genuine leather has
been adopted.
•Audio remote control, voice control, and cruise
control switches are available on some models.
•Sporty and thick type grip shape has been
adopted.
•Rigid core metal reduces steering wheel vibra-
tion.
•It incorporates an SRS airbag to protect the driver
in the event of a frontal collision.
•The airbag module is equipped with an inflator
that does not contain sodium azide.
•Optimisation of the airbag specifications reduces
the risk of injury to the passengers in a collision.
AC607284AB
Steering wheel Steering column
shaft assembly Pressure hose
assembly Oil reservoir
Suction hose
Oil pump assembly
Steering gear Return hose
Front axle crossmember
Heat protector
Pressure switch
AC607285
A
AAir bag module
Section A - A
Inflator
Steering wheel
audio remote control switch
Cruise control switch Steering wheel
voice control switch
Air bag module
AB