2008 MITSUBISHI COLT brake light

6-44 For emergencies
6
On a flooded road
●Avoid flooded roads. Water could enter the brake discs,
resulting in temporarily ineff ective brakes. In such cases,
lightly depress the brake pedal to see if the brakes are
operating properly. If they are not, lightly depress the
pedal several times while driving in order to dry the brake
pads.
● When driving in rain or on a road with many puddles, a
layer of water may form between the tyres and the road
surface.
This reduces a tyre’s frictional resistance on the road,
resulting in loss of steering stability and braking capabil-
ity.
To cope with this, observe the following:
On a snow-covered or frozen road
●When driving on a snow-covered or frozen road, it is rec-
ommended that you use snow tyres or tyre chains.
Refer to the “Snow tyres” and “Tyre chains” sections.
● Avoid high-speed operation, sudden acceleration, abrupt
brake application and sharp cornering.
● Depressing the brake pedal during travel on snowy or icy
roads may cause tyre slippage and skidding. When trac-
tion between the tyres and the road is reduced, the wheels
may skid and the vehicle cannot readily be brought to a
stop by conventional braking techniques. Braking will dif-
fer, depending upon whether you have anti-lock brakes
(ABS). As your vehicle is equipped with anti-lock brakes
(ABS), brake by pressing th e brake pedal hard, and keep-
ing it pressed.
● Allow extra distance between yo ur vehicle and the vehicle
in front of you, and avoid sudden braking.
On a bumpy or rutted road
Drive as slow as possible when driving on bumpy or rutted
roads.
(a) Drive your vehicle at a slow speed.
(b) Do not drive on worn tyres. Always maintain the specified tyre inflation pressures.
CAUTION!
●The impact on tyres and/ or wheels when driving on
a bumpy or rutted road can damage the tyre and/or
wheel.

Vehicle care7-5
7
●If your vehicle has rain sensor wipers, place the
wiper switch lever in the “ ” (OFF) position to
deactivate the rain sensor before washing the vehi-
cle. Otherwise, the wipers will operate in the pres-
ence of water spray on the windscreen and may get
damaged as a result.
● Refrain from using a car wash as its brushes may
scratch the paint surface, ca using it to lose its gloss.
Scratches will be especially visible on darker col-
oured vehicles.
● Never spray or splash water on the electrical compo-
nents in the engine compartment, as this may
adversely affect engine starting.
Exercise caution also when washing the underbody;
be careful not to spray wa ter into the engine com-
partment.
● Some types of hot water washing equipment apply
high pressure and heat to the vehicle. They may
cause heat distortion and damage to the vehicle resin
parts and may result in floo ding of the vehicle inte-
rior. Therefore; ob serve the following.
• Maintain a good distance of approx. 50 cm or more
between the vehicle body and the washing nozzle.
• When washing around the door glass, hold the
nozzle at a distance of more than 50 cm and at
right angles to the glass surface.
CAUTION!
● After washing the vehicle, drive the vehicle slowly
while lightly depressing the brake pedal several
times in order to dry out the brakes.
Leaving the brakes wet could result in reduced
braking performance. There is also a possibility that
they could freeze up or b ecome inoperative due to
rust, rendering the vehicle unable to move.
● When using an automatic car wash, pay attention to
the following items, referi ng to the operation man-
ual or consulting a car wash operator. If the follow-
ing procedure is not followed, it could result in
damage to your vehicle.
• The outside mirrors are retracted.
• The antenna is removed.
• The rear wiper arm assembly is taped or removed.
• If your vehicle is equipped with a rear spoiler, con- sult a car wash operator be fore using the car wash.
• If your vehicle has rain sensor wipers, place the
wiper switch lever in th e “ ” (OFF) position to
deactivate the rain sensor.
CAUTION!

Vehicle care7-7
7
Cleaning plastic partsE00901300071
Use a sponge or chamois leather.
If a car wax adheres on a grey or black rough surface of the
bumper, moulding or lamps, the surface becomes white. In
such a case, wipe it off using lukewarm water and soft cloth or
chamois leather.
Chrome partsE00901400014
In order to prevent spots and corrosion of chrome parts, wash
with water, dry thoroughly, and apply a special protective coat-
ing. This should be done more frequently in winter.
Aluminium wheels*E00901500086
1. Remove dirt using a sponge while sprinkling water on the wheel.
2. Use neutral detergent on any dirt that cannot be removed
easily with water.
Rinse off the neutral detergent after washing the wheel.
3. Dry the wheel thoroughly using a chamois leather or a soft
cloth.
CAUTION!
● Do not use a scrubbing brush or other hard tools as
they may damage the plastic part surface.
●Do not use wax containing compound (polishing
powder) which may damage the plastic part surface.
●Do not bring the plastic parts into contact with gaso-
line, light oil, brake fluids, engine oils, greases, paint
thinners, and sulphuric ac id (battery electrolyte)
which may crack, stain or discolour the plastic
parts.
If they touch the plastic pa rt, wipe them off with soft
cloth, chamois or the like and an aqueous solution of
neutral detergent then immediately rinse the
affected parts with water.
CAUTION!
● Do not use a brush or other hard implement on the
wheels.
Doing so could scratch the wheels.
●Do not use any cleaner th at contains an abrasive
substance or is acidic or alkaline. Doing so could
cause the coating on the wheels to peel or become
discoloured or stained.
● Do not directly apply hot water using a steam
cleaner or by any other means.
●Contact with seawater an d road deicer can cause
corrosion. Rinse off such su bstances as soon as pos-
sible.

8-14 Maintenance
8Wa s h e r f l u i d
E01000700379
Check the washer fluid level in the container.
If the level is low, replenish the container with washer fluid.
NOTE●
The washer fluid container serves the windscreen and rear
window.
During cold weather
To ensure proper oper ation of the washers at low temperatures,
use a fluid containing an anti-freezing agent.
Brake fluid/Clutch fluid*
E01000800035
The brake fluid (A) and the clutch fluid (B) share a reservoir
tank.
To check the fluid level
The fluid level must be between the “MAX” and “MIN” marks
on the reservoir.
The brake fluid level is monitored by a float. When the fluid
level falls below the “MIN” mark, the brake fluid warning
lamp lights up.
The brake fluid level falls slightly with wear of the brake pads,
but this does not indicate any abnormality.
A- Brake fluid C- Partition
B- Clutch fluid