18
Snap-in adapter
Inserting/removing the
snap-in adapter
1.Press area 1 surrounding the button and
remove the cover.
2.Insert the snap-in adapter in the front,
arrow1, and press it downward, arrow 2,
until it engages.
3.To remove the snap-in adapter, press area 1
surrounding the button.
Inserting/removing the
mobile phone
1.If present, remove the protective cap of the
mobile phone antenna connector so that
the mobile phone can snap into place in the
base plate.
2.With the buttons facing up, slide the mobile
phone toward the connectors and press
down until it snaps into place.
The battery will be charged when the vehicle is
at least in radio readiness mode, see the charge
display on the mobile phone.
To remove the mobile phone:
Press button.
ba.book Seite 18 Freitag, 6. Juli 2007 10:48 10
