2008 Mercury Mariner Tire jack

[x] Cancel search: Tire jack

Page 11 of 304

Mercury Mariner 2008  Owners Manuals Vehicle Symbol Glossary
Power Windows
Front/Rear
Power Window Lockout
Child Safety Door
Lock/UnlockInterior Luggage
Compartment Release
Panic AlarmEngine Oil
Engine CoolantEngine Coolant
Temperature
D

Page 221 of 304

Mercury Mariner 2008  Owners Manuals Removing the jack and tools
The jack and tools are located under
the carpeted load floor.
Pull back the carpet away from the
liftgate, and remove the hardboard
cover. If your vehicle is equipped
with

Page 223 of 304

Mercury Mariner 2008  Owners Manuals 6. If not replacing the spare or flat
tire to the underbody storage area,
raise winch up into the installed
position.
7. Use the attached fastener strap
(2) to tie the tether end to the
winch actuator

Page 224 of 304

Mercury Mariner 2008  Owners Manuals 1. Block the diagonally opposite
wheel.
2. Loosen each wheel lug nut
one-half turn counterclockwise but
do not remove them until the wheel
is raised off the ground.
Before placing the jack under the v

Page 225 of 304

Mercury Mariner 2008  Owners Manuals •Rear
View shown from forward of rear
tire. Position the jack directly below
the stud on the rear trailing arm.
3. Position the jack according to the
guides and turn the jack handle
clockwise until

Page 226 of 304

Mercury Mariner 2008  Owners Manuals 4. Remove the lug nuts with the lug nut wrench.
5. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall lug nuts until the wheel is snug against the hub.

Page 227 of 304

Mercury Mariner 2008  Owners Manuals 1. Place tire on end with valve stem
facing rearward, away from vehicle.
2. Place tether into bolt holes in
wheel and attach lug nut using lug
wrench.
3. Lay the tire on the ground with the valve stem