415 Practical hints
Flat tire
1Wheel wrench
On wheel to be changed, loosen but do
not yet remove the wheel bolts in direc-
tion of arrow (approximately one full
turn with wheel wrench1).
The jack take-up brackets are located di-
rectly behind the front wheel housings and
in front of the rear wheel housings.2Jack
3Take-up bracketPlace jack2 on firm ground.
Position jack2 under take-up
bracket3 so that it is always vertical
(plumb-line) as seen from the side,
even if the vehicle is parked on an
incline.
Warning!G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into either side of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on level surface. Be sure the jack arm is fully
seated in the jack take-up bracket. Always
lower the vehicle onto sufficient capacity
jackstands before working under the
vehicle.
Warning!G
Position the jack only on the jack take-up
brackets designed for this purpose.
If the jack is not properly positioned, the
vehicle may fall off of the jack.
416 Practical hints
Flat tire
Jack up the vehicle until the wheel is a
maximum of 1.2 in (3 cm) from the
ground.Removing the wheel
4Alignment bolt
Unscrew the upper-most wheel bolt
and remove.
Replace this wheel bolt with alignment
bolt4 supplied in the vehicle tool
kit (
page 389).
Remove the remaining bolts.
Remove the wheel.Mounting the spare wheel
1Wheel bolt for light alloy rims
2Wheel bolt for spare wheel with
collapsible tire (located under plastic
cover on the outside of spare wheel
rim)
Warning!G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
Never start the engine when the vehicle
is raised.
Never lie down under the raised vehicle.
!Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
Warning!G
Inflate collapsible tire only after the wheel is
properly mounted.
Inflate the collapsible tire using the electric
pump (
page 418) before lowering the
vehicle.
460 Index
Gear shifting malfunctions 167
Gearshift pattern 52
Kickdown 159
Kickdown, manual shift
program* 167
Manual shift program* 165
Program mode selector switch 161
Shifting procedure 156
Steering wheel gearshift control
one-touch gearshifting* 163
B
Backup lamp
Messages in the multifunction
display 383
Replacing bulbs 402
Bar 331
BAS 86
Batteries (SmartKey)
Replacing 398
Battery (Vehicle) 302, 422
Charging 424
Jump starting 426
Messages in the multifunction
display 372
Bead 331
Bi-Xenon headlamps* 401Brake Assist System see BAS
Brakes 280
Brake fluid 292, 454
Messages in the multifunction
display 373
SLK 55 AMG 281
Warning lamp 350
Break-in period 278
Bulbs
Messages in the multifunction
display 381–386
Replacing 400
C
California retail buyers and lessees,
Important notice for 11
Call priority, Tele Aid* 268
Capacities and recommended
fuels/lubricants 451
Carpets, cleaning 345
Catalytic converter 288
CD
Changer* 208, 253
Player/Changer*,
operation 134, 208
CD changer* (Audio system) 212Center console
Lamp 358
Lower part 30
Upper part 29
Central locking
Automatic 102, 146
Locking/unlocking from inside 103
SmartKey 62
Certification label 438
CHECK ENGINE indicator lamp 351
Checking tire pressure electronically
Tire Pressure Monitoring System
(TPMS), (USA only) 317
Children in the vehicle
Air bags 79
Infant and child restraint systems 79
Occupant Classification System
(OCS) 71
Passenger front air bag off indicator
lamp 74, 358
Chrome-plated exhaust tip*
Cleaning 346
Cigarette lighter 32, 256
