2008 MERCEDES-BENZ SLK-Class reset

34 At a glanceQuick reference COMAND
Press

or

:
The cursor moves horizontally, adjust
-
ing bass or treble accordingly.
Storing new settings:
Press

or the
Back
soft key,
or
wait until the display changes.
If the vehicle is equipped with a sound sys
-
tem*, the sound functions are available for
the following operating modes:
Radio

Single CD

MP3

CD changer*

AUX

Satellite radio*
The following sound functions are avail
-
able:
Default
Settings

Resets the sound functions* to the fac
-
tory setting.

Standard

Normal stereo playback.

Speech

Playback optimized for speech compre
-
hension.

LOGIC7
Surround

7-channel-surround playback (not for
mono-sources like AM waveband or
Weather Band in radio mode).
Different sound functions* can be activat
-
ed for each one of the operating modes.Example:

For CD mode: the
LOGIC7
Surround
func
-
tion,

for Satellite radio* mode: the
Speech
func
-
tion.
Switching sound functions*
Open the main menu of the appropriate
operating mode
( page
29)
.

Press the
Sound
soft key.
The Sound menu appears.

Use

or

to select the desired
function.

Press

.
The system switches to the selected
function.
Sound functions*

40 AudioRadio operation
Open the Audio main menu ( page
38)
.

Press the
Radio
soft key.
The Radio main menu appears. The sta
-
tion last tuned to will begin to play.
In this example: 
Weather Band

Channel 1
= current station

Press the
FM/AM
soft key in the Radio
main menu.
The main menu for either the FM or AM
waveband appears. The station last
tuned to will begin to play.
The waveband is indicated in the center
of the status bar.In this example: 
FM = FM waveband

1 = selected station is stored on
preset 1
( page
46)
.
Safety instructionsWarning
G
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand
-
still and operate the audio system only when
road, weather and traffic conditions permit.Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate
-
ly 14 m) every second.Switching to Radio mode
Switching wavebands

41 Audio
Radio operation
The following options are available:
Tuning via station search
( page
41)

Tuning via station presets
( page
42)

Tuning via Autostore presets

( page
43)

Tuning via scan search
( page
43)

Manual tuning
( page
44)

Tuning via direct frequency input

( page
44)
Tuning via station search On COMAND control unit
Switch to the desired FM or AM wave
-
band
( page
40)
.

Press
-
or

.
The next receivable ascending frequen
-
cy is tuned in and begins to play;
or

Press
,
or

.
The next receivable descending fre
-
quency is tuned in and begins to play.
On multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Radio display ( page
27)
.

Press
j.
The next receivable ascending frequen
-
cy is tuned in and begins to play;
or
Press
k.
The next receivable descending fre
-
quency is tuned in and begins to play.
iThe wavebands cover different fre
-
quency ranges:FM broadcast band:
FM (VHF = very high frequency)

87.7 - 107.9 MHz

Tuning increments 0.2 MHz
AM broadcast band:
MW (medium wave)

530 - 1710 kHz

Tuning increments 10 kHz
WB waveband:
WB (Weather Band)

162.400 - 162.550 MHz

Tuning increments = 1 channel
Tuning to a FM/AM station
iAudio search function
Freq.
must be
set in the multifunction display
( page
28)
.

42 AudioRadio operationTuning via station presets Ten presets each are available for FM and
AM. On COMAND control unitThe presets are accessed using the num
-
ber keypad, or via the Presets menu.Accessing via number keypad: 
Switch to the desired waveband ( page
40)
.

Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
Accessing via Presets menu:
Switch to the desired waveband ( page
40)
.

Press the
Presets
soft key.
The Presets menu appears.

Use

, 
, 
or

to choose a
preset and press

;
or
Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
On multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Radio display ( page
27)
.

Press
j.
The system tunes to the next station
stored in the station presets;
or
Press
k.
The system tunes to the previous sta
-
tion stored on the station presets.iAudio search function
Memory
must be
set in the multifunction display
( page
28)
.

43 Audio
Radio operation
Tuning via Autostore presets The Autostore function allows placing of
stations into the presets sorted by recep
-
tion quality
( page
46)
.
The system will store the station with the
strongest signal in preset
1.
Ten presets each are available for FM and
AM.
Switch to the desired waveband ( page
40)
.

Press the
Autost.
soft key.
The Autostore preset list appears. It
can take several seconds until all fre
-
quencies are displayed.

Use

, 
, 
or

to choose a
preset and press

;
or
Press one of the number keys

3
- "
.
The system tunes to the station stored
under this number.
Tuning via scan search Scan search is characterized as follows:
Scan search performs two runs.

During the first run, stations with ex
-
tremely good reception are played.

During the second run, stations with
weaker reception are played.

Scan search plays each receivable sta
-
tion for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
station listened to before the scan
search was started.
Starting scan search 
Switch to the desired waveband ( page
40)
.

Press the
Scan
soft key.
Scanning begins.


45 Audio
Radio operation

Press the number buttons in
succession:
!
,
, and

.
Each number entered appears in the
display.

The system tunes to the frequency en
-
tered (in this example: 98.5 Mhz) and
switches back to the FM menu.
Seven channels are available on the
Weather Band.

Switch to the WB waveband by press
-
ing the
WB soft key in the Radio main
menu
( page
40)
.
Each time you press the
WB soft key the
system will tune to the strongest re
-
ceivable station.
Tuning via station search On the COMAND control unit
Switch to the WB waveband by press
-
ing the
WB soft key in the Radio main
menu
( page
40)
.
The system will tune to the strongest
receivable station.

Press
-
or
,
.
The search begins descending or as
-
cending.The search stops at the next receivable
station.
On the multifunction steering wheel 
Switch the multifunction display in the
instrument cluster to Audio display ( page
27)
.

Press
j or
k.
The search stops at the next receivable
station.
Tuning via station presets
The seven strongest channels are sort
-
ed in preset 1 to 7 each time you press
the WB soft key. They are accessed us
-
ing the number keypad.

Press one of the number keys

3
- 
.
The system tunes to the station stored
under this number.
iEntries outside the frequency range are
not possible.Within the AM waveband, the input is
restricted to frequencies within the re
-
spective frequency increment, which
is10 kHz.The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.Tuning to a station on Weather Band

46 AudioRadio operationTen presets each are available for the

FM and AM waveband.The following options are available:
Storing manually using number keys

Storing manually using the Presets
menu

Storing using Autostore
( page
46)
Storing manually using the number

keys
3
- "

Tune to the station to be stored ( page
41)
.

Press a number key between
3
and
"
and hold it for more than 2 sec
-
onds.The station is now stored in the respec
-
tive memory location.
Storing manually using the Presets
menu 
Tune to the station to be stored ( page
41)
.

Press the
Presets
soft key.
The Presets menu appears.

Use

, 
, 
or

to select a
preset.

Press

for more than 2 seconds.
The station will be stored in the respec
-
tive memory location.
Storing using Autostore The Autostore function places stations into
the Autostore memory sorted by reception
quality.

The system stores the station with the
strongest signal in preset
1.

Switch to the desired waveband ( page
40)
.

Press the
Autost.
soft key.
The Autostore preset list appears.
Storing FM/AM stations
iThe Autostore feature stores presets in
a separate memory, not in the regular
presets seen under the
Presets
soft
key. As such, the Autostore memory is
only temporary.

47 Audio
Radio operation

Use

to select the

Reprogram
Autostore
header entry.

Press

.
The Autostore search starts. After a de
-
lay the new preset assignment ap
-
pears. The system tunes to the station
stored on preset 1.
To tune-in another station from the
Autostore preset list
( page
43)
.