2008 MERCEDES-BENZ SL55AMG automat

196 Controls in detail
Automatic climate control
Activating
Press button P (page 190).
The indicator lamp on the button
comes on.
The air conditioning switches to the
following functions automatically:

cooling on to dehumidify

maximum blower speed and
heating power

air flows onto the windshield
and the front side windows

the air recirculation mode is
switched off
Deactivating
Press button P (page 190).
The indicator lamp on the button goes
out. Defrosting is turned off.
The previous settings are in effect
again.Windshield fogged on the outside
Switch the windshield wipers on
(
page 58).
If the automatic air distribution and air vol-
ume are switched off:
Turn air distribution controls1 and 5
(
page 190) to position h ork.
or
Press control buttons 1, 5 and 9
(
page 190).
The control buttons are engaged.
TheU symbol on the control
buttons come on. Air distribution and
air volume are adjusted automatically.
Air recirculation mode
Switch to air recirculation mode to prevent
unpleasant odors from entering the vehicle
from the outside. This setting cuts off the
intake of outside air and recirculates the
air in the passenger compartment.
iThe cooling remains switched on.
iKeep this setting selected only until the
windshield is clear again.
Warning!G
Fogged windows impair visibility, endanger-
ing you and others. If the windows begin to
fog on the inside, switching off the air
recirculation mode immediately should clear
interior window fogging. If interior window
fogging persists, make sure the air
conditioning (
page 198) is activated, or
press buttonP.

197 Controls in detail
Automatic climate control
Activating
Briefly press button,
(
page 190).
The indicator lamp on the button
comes on.Deactivating
Briefly press button,
(
page 190).
The indicator lamp on the button goes
out.
At outside temperatures above 79°F
(26°C) the system will not automatically
switch back to outside air.Air recirculation mode with conve-
nience closing or opening feature
Activating
Press and hold button,.
The indicator lamp on the button
comes on. The air recirculation mode is
activated. The windows will close.
iThe air recirculation mode is activated auto-
matically

at high outside temperatures

if the concentration of carbon monoxide
(CO) and/or nitrogen oxide (NO
x) in the out-
side air increases, for example in a tunnel
The indicator lamp on button, is not lit when
the air recirculation mode is automatically
switched on.
A quantity of outside air is added after approxi-
mately 30 minutes.
iThe manually selected air recirculation
mode is deactivated automatically

after 5 minutes if the outside temperature is
below approximately 41°F (5°C)

after 5 minutes if the air conditioning is
turned off

after 30 minutes if the outside temperature
is above approximately 41°F (5°C)
Warning!G
Never operate the windows if there is the
possibility of anyone being harmed by the
closing procedure.
In the event that the procedure causes po-
tential danger, the closing of the windows
can be immediately halted by releasing
the, button or by pressing and pulling
the respective window switch.

198 Controls in detail
Automatic climate control
Deactivating
Press and hold button,.
The indicator lamp on the button goes
out. The air recirculation mode is deac-
tivated. The windows will return to their
previous position.
Air conditioning
The air conditioning (cooling) function is
operational when the engine is running and
cools the vehicle interior down to the
selected temperature. In addition, the
cooling function dehumidifies the air in
the vehicle interior, thus preventing the
windows from fogging up.Deactivating
It is possible to deactivate the cooling
function of the automatic climate control
system. The air in the vehicle will then no
longer be cooled or dehumidified.
Press button 2 (page 190).
The indicator lamp on the button goes
out. The cooling function switches off
after a short delay.
iA window will only return to its previous
position if it has not moved to another position
using the respective window switch after it was
closed with button,.
iCondensation may drip out from underneath
the vehicle. This is normal and not an indication
of a malfunction.
Warning!G
If you turn off the cooling function, the
vehicle will not be cooled when weather
conditions are warm. The windows can fog
up more quickly. Window fogging may
impair visibility and endanger you and
others.

199 Controls in detail
Automatic climate control
Activating
Moist air can fog up the windows. You can
dehumidify the air with the air condition-
ing.
Press button 2 once more
(
page 190).
The indicator lamp on the button
comes on.
The air conditioning uses the refrigerant
R134A. This refrigerant is free of CFCs
which are harmful to the ozone layer.
Residual heat and ventilation
With the engine switched off, it is possible
to continue to heat or ventilate the interior
for up to 30 minutes. This feature makes
use of the residual heat produced by the
engine.Activating
With the SmartKey:
Turn the SmartKey in the starter switch
to position1 or0, or remove it from
the starter switch.
Press button T (page 190).
The indicator lamp on the button
comes on.
With KEYLESS-GO*:
Turn off the engine by pressing the
KEYLESS-GO* start/stop button and
open the driver’s door (with the driver’s
door open, the starter switch is in posi-
tion 0, same as with the SmartKey re-
moved from the starter switch)
Press button T (page 190).
The indicator lamp on the button
comes on.
!If the 2 button on the automatic climate
control panel starts to flash, this indicates that
the air conditioning is losing refrigerant. The
compressor has turned off. The air conditioning
cannot be turned on again.
Have the air conditioning checked at the nearest
authorized Mercedes-Benz Center.
iHow long the system will provide heating
depends on the coolant temperature and the
selected temperature. The blower will run at low
speed regardless of the air distribution control
setting.

200 Controls in detail
Automatic climate control
Deactivating
Press button T (page 190).
The indicator lamp on the button goes
out.
The residual heat is automatically turned
off:

when the ignition is switched on

after about 30 minutes

if the battery voltage drops
Ventilated glove box
The glove box has its own air vents that
allow for cooling ventilation when the auto-
matic climate control system is activated.
Glove box
1Thumbwheel
2Air ventOpening the air vent
Make sure the air vent in the glove box
is unobstructed.
Turn thumbwheel1 upwards.
Closing the air vent
Turn thumbwheel1 downwards.
iYou should keep air vent 2 closed when
outside temperatures are low.

201 Controls in detail
Power windows
Power windows
Opening and closing the windows
The windows are opened and closed elec-
trically. The switches for all the windows
are on the driver’s door. The switch for the
passenger side windows is on the passen-
ger door.
1Left door and rear side windows
2Right door and rear side windows
Switch on the ignition (page 40).
Warning!G
When closing the windows, make sure that
there is no danger of anyone being injured
by the closing procedure.
The closing of the door windows can be im-
mediately halted by releasing the switch or,
if the switch was pulled past the resistance
point and released, by either pressing or
pulling the respective switch.
The closing of the rear side windows can be
immediately halted by releasing the switch.
If a door window encounters an obstruction
that blocks its path in a circumstance where
you pulled the switch past the resistance
point and released it to close the door win-
dow, the automatic reversal function will
stop the door window and open it slightly.
If the door window encounters an obstruc-
tion that blocks its path in a circumstance
where you are closing the door window by
pulling and holding the switch, by pressing
and holding button ‹on the SmartKey,
by pressing and holding the lock button
(vehicles with KEYLESS-GO*) on an outside
door handle, by pressing and holding the re-
tractable hardtop switch, or by pressing and holding button,on the automatic
climate control panel, the automatic
reversal function will not operate.
When leaving the vehicle, always remove the
SmartKey or SmartKey with KEYLESS-GO*
from the starter switch, take it with you, and
lock the vehicle. Do not leave children
unattended in the vehicle, or with access to
an unlocked vehicle. A child’s unsupervised
access to a vehicle could result in an
accident and/or serious personal injury.
iDepending on the current position, the win-
dows may also open or close when the air recir-
culation button, on the control panel of the
automatic climate control (
page 196) is
pressed and held.
iAfter switching off the ignition (page 40)
or removing the SmartKey from the starter
switch, the windows can be operated

until you open a door

for at least 5 minutes if no door was opened

202 Controls in detail
Power windows
Opening the door windows
Press switch1 or2 to the resistance
point.
The corresponding door window will
move downwards until you release the
switch.
Opening the rear side windows when
the hardtop is closed:
Open the door window.
Press switch1 or 2 to the resistance
point again.
The corresponding rear side window
will open completely.Closing the door windows
Pull switch1 or2 to the resistance
point.
The corresponding door window will
move upwards until you release the
switch.
Closing the rear side windows if the
hardtop is closed:
Close the door window.
Pull and hold switch1 or 2.
The corresponding rear side window
will move upwards until you release the
switch. Fully opening the door windows
(Express-open)
Press switch1 or2 past the resis-
tance point and release.
The corresponding door window opens
completely.
iIf the hardtop is open, the respective rear
side window will also open automatically.
Warning!G
If you pull and hold the switch up when clos-
ing the door window, and upward movement
of the door window is blocked by some ob-
struction including but not limited to arms,
hands, fingers, etc., the automatic reversal
will not operate.
iIf the hardtop is open, the respective rear
side window will also open automatically.

203 Controls in detail
Power windows
Fully closing the door windows
(Express-close)
Pull switch1 or2 past the resis-
tance point and release.
The corresponding door window closes
completely.
If the upward movement of the door win-
dow is blocked during the closing proce-
dure, the door window will stop and open
slightly.
Stopping windows
Press or pull the respective switch
again.Closing the windows with
KEYLESS-GO*
Press and hold lock button on an out-
side door handle (
page 66) until the
windows are closed.
Synchronizing power windows
The power windows must be synchronized
each time

after the battery has been dis-
connected

if the power windows cannot be fully
opened (Express-open) or closed
(Express-close)
Synchronizing the power windows
Switch on the ignition (page 40).
Pull the power window switches until
the side windows are closed.
Hold the switches for approximately
1 second.
The power windows are synchronized.
Warning!G
Driver’s door only:
If within 5 seconds the switch is again
pulled past the resistance point and
released, the automatic reversal will not
operate.
Warning!G
When closing the windows make sure that
there is no danger of anyone being harmed
by the closing procedure.
The windows will not automatically re-open
if blocked during convenience closing.
If potential danger exists, proceed as
follows:

Release the lock button.

Pull on the door handle and hold firmly.
The side windows open for as long as
the door handle is held but the door not
opened.