Contents
Safety and Security........................... 67
Occupant safety................................... 68
Air bags .......................................... 70
Occupant Classification System ..... 74
Seat belts ....................................... 79
Roll bar ........................................... 83
Children in the vehicle .................... 84
Panic alarm .......................................... 88
Activating ....................................... 88
Deactivating ................................... 88
Driving safety systems ......................... 89
ABS ................................................ 89
BAS ................................................ 91
ESP
®............................................... 91
Electro-hydraulic brake system ...... 94
Anti-theft systems................................ 98
Immobilizer..................................... 98
Anti-theft alarm system .................. 98
Tow-away alarm ........................... 100
Controls in detail............................. 103
Locking and unlocking ....................... 104
SmartKey ..................................... 104
SmartKey with KEYLESS-GO* ...... 108
Checking the batteries in the
SmartKey or SmartKey with
KEYLESS-GO* .............................. 113
Loss of the SmartKey or
SmartKey with KEYLESS-GO* ...... 113
Opening the doors from
the inside ..................................... 113
Opening the trunk ........................ 114
Closing the trunk.......................... 116
Valet locking ................................ 120
Trunk lid emergency release ........ 121
Power closing assist for trunk lid . 121
Automatic central locking ............ 122
Locking and unlocking from
the inside ..................................... 122Seats ................................................. 124
Moving the seats forward and
backward ..................................... 124
Lumbar support ........................... 124
Multicontour backrest*................ 125
Seat heating................................. 126
Seat ventilation* .......................... 128
Memory function ............................... 129
Storing positions into memory ..... 130
Recalling positions from memory. 130
Lighting ............................................. 131
Exterior lamp switch .................... 131
Combination switch ..................... 135
Corner-illuminating front
fog lamps* ................................... 136
Hazard warning flasher ................ 137
Interior lighting ............................ 138
Courtesy lighting .......................... 139
Trunk lamp ................................... 139
32 At a glance
Center console
Lower partItemPage
1Gear selector lever for
automatic transmission172
2Parktronic system*
deactivation switch233
3Exterior rear view mirror
adjustment49
4ABC suspension tuning
button232
5Tow-away alarm switch100
6Retractable hardtop switch204
Roll bar buttons83
ItemPage
7ABC vehicle level control
button230
8ESP® switch93
9Thumbwheel for setting
following distance for
Distronic*226
aDistance warning function*
on/off switch229
bProgram mode selector
switch for automatic
transmission182
95 Safety and Security
Driving safety systems
The electro-hydraulic brake system is auto-
matically activated when you
unlock the vehicle with the SmartKey
or with KEYLESS-GO*
open the driver’s or passenger door
turn the SmartKey in the starter switch
to position1
in vehicles with KEYLESS-GO*, press
the start/stop button on the gear se-
lector lever once
depress the brake pedal
release the parking brake
Warning!G
The electro-hydraulic brake system requires
electrical power to operate.
A malfunction in the vehicle’s power supply
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. In such a case, the
red brake warning lamp (
page 345)
comes on and warning messages
(
page 377) appear in the multifunction
display while driving. To brake, the driver
must then apply significantly greater brake
pedal pressure and depress the pedal much
further to obtain the expected braking ef-
fect. If necessary, apply full pressure to the
brake pedal. Brakes are only applied to the
front wheels. Stopping distance is in-
creased!
If there is a malfunction in the
electro-hydraulic brake system, we recom-
mend that the vehicle be transported with
all wheels off the ground using flatbed or ap-
propriate wheel lift/dolly equipment.
A tow bar must be used if circumstances do
not permit the use of the recommended
towing methods and the vehicle requires
towing with all four wheels on the ground.
Towing the vehicle with all four wheels on
the ground is only permissible for distances
up to 30 miles (50 km) and at a speed not to
exceed 30 mph (50 km/h). For more infor-
mation, see “Towing the vehicle”
(
page 434).
210 Controls in detail
Retractable hardtop
2Buckle
Guide the fastening straps around the
top of the roll bar and close buckles 2.
Tighten the fastening straps if neces-
sary.
Lower the roll bar (page 83).
Fold the upper section of the wind
screen up towards the head restraints
until it stops.Removing
Fold the upper section of the wind
screen back.
Adjust the roll bar to a height
(
page 83) that allows you to reach
easily underneath it.
1Release button
Undo the buckles on the upper section
of the roll bar by pressing release
button1.
Lower the roll bar (page 83).
Make sure the fastening straps do not
get caught.
Pull the wind screen out towards the
front of the vehicle.
Be careful not to damage interior trim
with the guide tabs.
Store the wind screen in a safe place.
Luggage cover
The luggage cover covers luggage/cargo
in the trunk.
!To prevent damage to the retractable hard-
top or luggage/cargo when lowering:
Load trunk only to the height of the luggage
cover.
Do not permit luggage/cargo to push up the
closed luggage cover.
Do not load anything on top of or in front of
the luggage cover.
Do not place anything on the shelf behind
the roll bar.
268 Operation
Driving instructions
Power assistanceBrakes
Warning!G
The brake system requires electrical energy
for operation.
A malfunction in the vehicle’s power supply
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. In such a case, the
red brake warning lamp (
page 345) and
warning messages (
page 359) in the in-
strument cluster come on while driving. To
brake, the driver must then apply signifi-
cantly greater brake pedal pressure and de-
press the pedal much further to obtain the
expected braking effect. If necessary, apply
full pressure to the brake pedal. Brakes are
only applied to the front wheels. Stopping
distance is increased! If there is a malfunc-
tion in the electro-hydraulic brake system,
we recommend that the vehicle be trans-
ported with all wheels off the ground using
flatbed or appropriate wheel lift/dolly equip-
ment.
A tow bar must be used if circumstances do
not permit the use of the recommended
towing methods and the vehicle requires
towing with all four wheels on the ground.
Towing the vehicle with all four wheels on
the ground is only permissible for distances
up to 30 miles (50 km) and at a speed not to
exceed 30 mph (50 km/h). For more infor-
mation, see “Towing the vehicle”
(
page 434).
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the
vehicle.
Warning!G
After driving in heavy rain for some time
without applying the brakes or through wa-
ter deep enough to wet brake components,
the first braking action may be somewhat
reduced and increased pedal pressure may
be necessary to obtain expected braking
effect. Maintain a safe distance from
vehicles in front.
Resting your foot on the brake pedal will
cause excessive and premature wear of the
brake pads.
It can also result in the brakes overheating
thereby significantly reducing their effec-
tiveness. It may not be possible to stop the
vehicle in sufficient time to avoid an
accident.
378 Practical hints
What to do if …
Left displayRight displayPossible cause/consequencePossible solution
TReduced
Brake Effect
Depress brake
pedal fully.The electro-hydraulic brake system
is in emergency operation mode.
Considerably greater brake pedal
force is required and the brake
pedal travel is longer. The stopping
distance is increased.
The maximum speed is limited to
55 mph (90 km/h).Stop the vehicle in a safe location or as soon
as it is safe to do so.
Apply the parking brake (page 63).
Do not drive any further.
Prevent the vehicle from rolling away by
blocking the wheels with wheel chocks or
other sizeable objects.
Contact an authorized Mercedes-Benz Center
or call for Roadside Assistance (
page 253).
Warning!G
Driving while this message is displayed can
result in an accident. Have your brake
system checked immediately.
If the electro-hydraulic brake system enters
its emergency operation mode, the driver
must apply significantly greater brake pedal
pressure and depress the pedal much
further than normal to obtain braking effect.
If necessary, apply full pressure to the brake
pedal. Brakes are only applied to the front
wheels. Stopping distance is increased!
If there is a malfunction in the
electro-hydraulic brake system, we recom-
mend that the vehicle be transported with
all wheels off the ground using flatbed or ap-
propriate wheel lift/dolly equipment.A tow bar must be used if circumstances do
not permit the use of the recommended
towing methods and the vehicle requires
towing with all four wheels on the ground.
Towing the vehicle with all four wheels on
the ground is only permissible for distances
up to 30 miles (50 km) and at a speed not to
exceed 30 mph (50 km/h). For more infor-
mation, see “Towing the vehicle”
(
page 434).
379 Practical hints
What to do if …
Left displayRight displayPossible cause/consequencePossible solution
USA only:
;
Canada only:
3
Reduced
Brake Effect
Service
RequiredThe electro-hydraulic brake system
is in emergency operation mode.
Considerably greater brake pedal
force is required and the brake
pedal travel is longer. The stopping
distance is increased.Stop the vehicle in a safe location or as soon
as it is safe to do so.
Apply the parking brake (page 63).
Do not drive any further.
Prevent the vehicle from rolling away by
blocking the wheels with wheel chocks or
other sizeable objects.
Contact an authorized Mercedes-Benz Center
or call for Roadside Assistance (
page 253).
Warning!G
Driving while this message is displayed can
result in an accident. Have your brake
system checked immediately.
If the electro-hydraulic brake system enters
its emergency operation mode, the driver
must apply significantly greater brake pedal
pressure and depress the pedal much
further than normal to obtain braking effect.
If necessary, apply full pressure to the brake
pedal. Brakes are only applied to the front
wheels. Stopping distance is increased!
If there is a malfunction in the
electro-hydraulic brake system, we recom-
mend that the vehicle be transported with
all wheels off the ground using flatbed or ap-
propriate wheel lift/dolly equipment.A tow bar must be used if circumstances do
not permit the use of the recommended
towing methods and the vehicle requires
towing with all four wheels on the ground.
Towing the vehicle with all four wheels on
the ground is only permissible for distances
up to 30 miles (50 km) and at a speed not to
exceed 30 mph (50 km/h). For more infor-
mation, see “Towing the vehicle”
(
page 434).
434 Practical hints
Towing the vehicle
Mercedes-Benz recommends that the vehi-
cle be transported with all wheels off the
ground using flatbed or appropriate wheel
lift/dolly equipment.
When circumstances do not permit the
recommended towing methods, the
vehicle may be towed with all wheels on
the ground or front wheels raised only so
far as necessary to have the vehicle moved
to a safe location where the recommended
towing methods can be employed.
!Do not tow-start the vehicle.
!Use flatbed or wheel lift/dolly equipment
with SmartKey in starter switch turned to
position0.
Do not tow with sling-type equipment. Towing
with sling-type equipment over bumpy roads will
damage radiator and supports.
To prevent damage during transport, do not tie
down vehicle by its chassis or suspension parts.
Switch off the tow-away alarm (
page 100) and
the automatic central locking (
page 166).
Warning!G
If circumstances require towing the vehicle
with all wheels on the ground, always tow
with a tow bar if:
the engine will not run
there is a malfunction in the
electro-hydraulic brake system
there is a malfunction in the power sup-
ply or in the vehicle’s electrical system
This is necessary to adequately control the
towed vehicle.
Prior to towing the vehicle with all wheels on
the ground, make certain that the SmartKey
is in starter switch position2.
Warning!G
The brake system requires electrical power
to operate.
A malfunction in the vehicle’s power supply
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. To brake, the driver
must then apply significantly greater brake
pedal pressure and depress the pedal much
further to obtain the expected braking ef-
fect. If necessary, apply full pressure to the
brake pedal. Brakes are only applied to the
front wheels. Stopping distance is
increased! Adapt your driving style
accordingly. For more information, see
“Electro-hydraulic brake system”
(
page 94).
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the ve-
hicle. Adapt your driving accordingly.