2008 MERCEDES-BENZ SL550 buttons

239 Controls in detail
Useful features
Opening
Press release button 1.
Storage compartment lid 2 lid opens
upwards.
Storage compartment/telephone*
compartment under armrest
The release buttons are located under the
cushion of the armrest.
1Opening
2Telephone* compartment release
button
3Storage compartment release buttonOpening telephone* compartment
Press release button2 and lift the
armrest in direction of arrow 1.
Opening storage compartment
Press release button3 and lift the
armrest in direction of arrow 1.Seat storage compartments
Storage compartments are located in the
seat base of each seat and are intended for
storing small, light weight items.
Driver’s seat storage compartment
1Handle
2Storage compartment lid
Pull handle 1 up.
Fold lid 2 down.
iThe mobile phone cradle (page 247), the
Roadside Assistance button• (
page 253)
and the Information button¡ (
page 254)
are located in the telephone* compartment.
iThe passenger seat storage compartment
contains the first aid kit, see “First aid kit”
(
page 400).

248 Controls in detail
Useful features
When the mobile phone is inserted in the
cradle, you can operate the telephone
using the following devices:

mobile phone keypad

Voice Control System* (see separate
operating instructions)

COMAND (see separate operating
instructions)

buttonss andt on the multi-
function steering wheel (
page 144)Please note that these functions are only
available with Mercedes-Benz approved
mobile phones. Please contact an autho-
rized Mercedes-Benz Center for informa-
tion on features available for your mobile
phone of choice.
The cradle is located in the front center
armrest.
Open the telephone compartment
(
page 239).
Inserting mobile phone in mobile phone
cradle
Once the mobile phone has been inserted
in the mobile phone cradle, you have to
use the hands-free device to respond
during phone calls.
Warning!G
Please do not forget that your primary re-
sponsibility is to drive the vehicle. A driver’s
attention to the road must always be
his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call.
If you choose to use the telephone
1 while
driving, please use the hands-free device
and only use the telephone when road,
weather and traffic conditions permit. Some
jurisdictions prohibit the driver from using a
mobile telephone while driving a vehicle.
Only operate the COMAND (Cockpit
Management and Data System)
1 if road,
weather, and traffic conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet
(approximately 14 m) every second.
1Observe all legal requirements.
iVarious mobile phone cradles can be
installed in the center armrest, see separate
installation instructions for the mobile phone
cradle. These mobile phone cradles can be
obtained from an authorized Mercedes-Benz
Center.
The functions and services available to you while
using the mobile phone depend on your service
provider and the type of mobile phone you are
using. See also separate operating manual for
instructions on how to use your mobile phone.
!Do not try to remove the mobile phone along
with the cradle. You could otherwise damage the
mobile phone cradle.

255 Controls in detail
Useful features
When the connection is established, the
message
Call Connected appears in the
multifunction display. The Tele Aid system
will transmit data generating the vehicle
identification number, model, color and lo-
cation (subject to availability of cellular
and GPS signals).
A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be estab-
lished. Information regarding the operation
of your vehicle, the nearest
Mercedes-Benz Center or Mercedes-Benz
USA products and services is available to
you.
For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you sep-
arately) to learn more (USA only).iThe indicator lamp in the Information
button¡ remains illuminated in red for ap-
proximately 10 seconds during the system
self-check after switching on the ignition (togeth-
er with the SOS button and the Roadside Assis-
tance button•).
See system self-check (
page 251) if the indi-
cator lamp does not come on in red or stays on
longer than approximately 10 seconds.
If the indicator lamp in the Information
button¡ is flashing continuously and no
voice connection to the Response Center was
established, then the Tele Aid system could not
initiate an Information call (e.g. the relevant
cellular phone network is not available). The
message
Call Failed appears in the multi-
function display.
Information calls can be terminated using the
tbutton on the multifunction steering wheel
or the respective button for ending a telephone
call on the COMAND headunit.
!If the indicator lamps do not start flashing
after pressing one of the buttons or remain illu-
minated (in red) at any time, the Tele Aid system
has detected a malfunction or the service is cur-
rently not active, and may not initiate a call. Visit
an authorized Mercedes-Benz Center and have
the system checked or contact the
Response Center at 1-800-756-9018 (in the
USA) or 1-888-923-8367 (in Canada) as soon as
possible.

259 Controls in detail
Useful features
Step 2:
If you have previously programmed an
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when indicator lamp1
begins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.Step 3:Hold the end of hand-held remote
control5 of the device you wish to
train approximately 2 to 5 in
(5 to12 cm) away from the signal trans-
mitter button (2, 3 or4) to be pro-
grammed, while keeping indicator
lamp1 in view.
Step 4:
Using both hands, simultaneously
press hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
Indicator lamp1 will flash, first slowly
and then rapidly.Step 5:
After indicator lamp1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
Step 6:
Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe indicator lamp1.
If indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and re-
leased.
iIndicator lamp1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.
iIf indicator lamp1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.

260 Controls in detail
Useful features
Step 7:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn” or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual. Step 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing step.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.Step 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
iSome garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.

262 Controls in detail
Useful features
Operation of integrated remote control
Switch on the ignition (page 40).
Select and press the appropriate inte-
grated signal transmitter button (2,
3 or4) to activate the remote con-
trolled device.
The integrated remote control trans-
mitter continues to send the signal as
long as the button is pressed – up to
20 seconds.
Erasing the integrated remote control
memory
Switch on the ignition (page 40).
Simultaneously press and hold outer
signal transmitter buttons2 and 4,
for approximately 20 seconds, until the
indicator lamp1 flashes rapidly. Do
not hold for longer than 30 seconds.
The codes of all three channels are
erased.Programming tips
If you are having difficulty programming
the integrated remote control, here are
some helpful tips:

Check the frequency of hand-held re-
mote control5 (typically located on
the reverse side of the remote). The in-
tegrated remote control is compatible
with radio-frequency devices operating
between 280-390 MHz.

Put a new battery in hand-held remote
control5. This will increase the likeli-
hood of the hand-held remote control
sending a faster and more accurate sig-
nal to the integrated remote control.

While performing step 3, hold
hand-held remote control5 at
different lengths and angles from the
signal transmitter button (2, 3 or4)
you are programming. Attempt varying
angles at the distance of
2 to 5 in (5 to 12 cm) away or the
same angle at varying distances.

If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.

Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
iIf you sell your vehicle, erase the codes of all
three channels.
iCertain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance
Center (in the USA only) at
1-800-FOR-MERCedes, or Customer Service (in
Canada) at 1-800-387-0100.

476 Index
Light sensor 392
Lighter see Cigarette lighter
Lighting
Instruments 140
Interior 138
Settings (control system) 163
Trunk 139
Limp-home mode 184
Load assist 245
Lowering manually 406
Loading terminology 322
Loading the vehicle 294
Lock buttons 38
Door handle (KEYLESS-GO*) 66
Locking the vehicle 62
In an emergency 405
Low beam headlamps 57, 131, 410
Replacing bulbs 412
Lowering
Load assist manually 406
Roll bar 84
Luggage compartment, rear 242
Luggage cover 210
Messages in the multifunction
display 399
Lumbar support adjustment 124M
Main fuse box 438
Maintenance
Calling up maintenance service
indicator display 332
Clearing maintenance service
indicator message 331
Maintenance service indicator
message 330
Maintenance service term
exceeded 331
Resetting maintenance service
indicator 332
Maintenance service
When due 330
Maintenance service indicator 330
Maintenance System 330
Malfunction memory 156
Calling up 157
Clearing 157
Manual operation
Interior lighting control 139
Locking the vehicle 405
Lowering load assist 406
Unlocking storage
compartments 404Unlocking the driver’s door 403
Unlocking the trunk 404
Manual shift program SL 55 AMG and
SL 65 AMG 182
Deactivating 184
Massage function 125
Maximum cooling MAXCOOL 195
Maximum inflation pressure 324
Maximum load rating 323
Maximum loaded vehicle weight 323
Mechanical key
Loss of 113
Menus 145
AMG 150
AUDIO 153
Distronic* 156, 222
NAV 155
Standard display 149
TEL* 169
Trip computer 167
Vehicle status message memory 156
Menus see Control system menus
Miles/kilometers in speedometer 160
Minimum distance (Parktronic*) 235

477 Index
Mirrors 49, 185
Adjusting interior rear view mirror 49
Exterior rear view mirrors 49
Misfiring 60
MOE tires* see MOExtended system*
MOExtended system* 312, 425
MOExtended tires* 449
MON 280
Mph or km/h in speedometer 160
Multifunction display 143
Left display 27
Right display 29
Selecting language 160
Standard display 143
Multifunction display messages
ABC 361
ABS 363, 364
Battery 377
Brake pads 380
Brake system 382
Coolant 383
Coolant level 385
Display malfunction 386Doors 386
Easy-entry/exit feature 386
Electro-hydraulic brake
system 378, 379
Hood 390
Luggage cover 399
Passenger front air bag 370
Restraint systems 373
Roll bar 396
SmartKey 390
SmartKey with KEYLESS-GO* 391
SRS 373
Tele Aid 396
Telephone* 396
Tires 397
Trunk 399
Washer fluid 399
Multifunction steering wheel 30, 144
Buttons 144N
Navigation system
Operating 155
Neutral gear position, Automatic
transmission 172, 174
Night security illumination 164
Normal occupant weight 324
O
Occupant Classification System see OCS
Occupant distribution 324
Occupant safety
OCS 74
Passenger front air bag off indicator
lamp 78
SRS 68
OCS 74
Self-test 78
Odometer, main 27
Oil
Adding 286
Consumption 283
Oil dipstick 286
Oil see Engine oil