2008 MERCEDES-BENZ S65AMG language

225 Control systems
COMAND address book
Selecting an entry in the main address
book display
Slide omp or rotate ymz until the
main area is selected.
Creating a new address book entry
Select “Telephone”
“Telephone”

“Address Book”
“New Entry”.
The input menu appears with the data
fields and the input characters.
Illustration: input menu for private data
1To switch between work and home
data ( or symbol)
2Selected data field with input mark
(cursor)
3Display of set data type – in example
display, home data is set ( symbol
and “Home” display)
4Input characters
Switching between private and
business data: Select symbol 1.
The display switches to private or busi-
ness data, depending on the previous
status.
Changing data field: Slide rmq re-
peatedly until desired entry is highlight-
ed.
or
Select [ or ] repeatedly until de-
sired entry is highlighted.
Entering data into a field:
Select desired characters one by one
from the input characters.
Toggling upper and lower case for
the input characters: Select& or
(.
Changing language for the input
characters: Select!.
Select desired language.
iPlease observe the following when creating
a new address book entry:
You can define your own address in the destina-
tion memory in navigation mode. When defining
the address, you can transfer data already en-
tered as an address book entry.
In the address book entry, the town/city and
street must be spelled in the same way as the
destination entry so that the data matches the
digital map data.
In order for the state (province) to match the
map data, its complete name or abbreviation
may be entered.
Examples:

Florida or FL

Colorado or CO

Alberta or AB

Ontario or ON


227 Control systems
COMAND address book
Entries with category symbol 3 come
from the mobile phone. The following cate-
gory symbols are possible:

= symbol for “Mobile” category

= symbol for “Home” category

= symbol for “Work” category

= symbol for “Fax” category

= symbol for “Pager” category

= symbol for “Main” category or for
unknown category or for phone entries
that are saved on the SIM card of a
GSM mobile phone
Entries without a category symbol or with
the or symbols come from the
COMAND address book. All other entries
come from the mobile phone and are only
visible when the mobile phone is in the cra-
dle*.
Entries with the symbol contain a voice
entry (
page 232). It is possible to add
voice entries in vehicles with Voice Con-
trol*.Entries with the symbol contain com-
plete, navigable address data from the nav-
igation system that correspond to digital
map data. It is possible to quickly start
route guidance to these types of entry
(
page 231).
Switching from the smart speller to the
list
Slide mq repeatedly or press n until
the smart speller is hidden.
or
Select ?.
Switching from the list to the smart
speller
Select “Back” from the list.
Searching
Searching via the smart speller
Switch from the list to the smart speller
if necessary.
Changing smart speller language:
Select!.
Select desired language.
Changing smart speller character
set: Select#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
Entering characters: Select the char-
acters one by one of the entry you are
searching for.
Deleting individual characters:
Select) and briefly press n.
Each time you enter or delete a charac-
ter, the closest match will be displayed
at the top of the list.
Deleting an entire entry: Select)
and press and hold n until the entry is
deleted.


235 Control systems
COMAND system settings
COMAND system settings
System settings menu overview
Display settings
Switching the display on or off
Switching off: Select “Vehicle”

“Display OFF”.
Switching back on: Rotate ymz or
slideqmr.
Setting the display design
Select “Vehicle”
“System Settings”

“Display”.
Select “Day Mode”, “Night Mode” or
“Automatic”.
Time settings
Setting the time
Select “Vehicle”
“System Settings”

“Time”
“Time”.
Selecting hour or minute(s):
Slideomp.
Setting value: Rotate ymz or
slideqmr.
Saving setting: Press n.
iThe components and operating principles of
COMAND can be found on (
page 85).
Display
(
page 235)
Time
(
page 235)
Voice Control*
(
page 237)
Language
(
page 238)
Favorite
(
page 238)
Services
(
page 239)
Reset
(
page 235)
Display settingsTime settingsVoice Control*
settingsLanguage
settingsAssign favorite
buttonBluetooth®
settingsReset COMAND to
factory settings
iIn the “Automatic” setting, COMAND ana-
lyzes the automatic vehicle light sensor and
switches between the display design automati-
cally.
iThe correct time must be set for the follow-
ing navigation system functions to operate cor-
rectly:

Route guidance on routes with time-depen-
dent traffic guidance

Calculation of estimated arrival time
iThe increment value for setting the minutes
depends on the situation. If GPS reception is
available, it is 30 minutes. If GPS reception is not
available, it is one minute.

238 Control systems
COMAND system settings
Canceling during the first or second part
of individualization
Select “Cancel”.
A prompt appears asking whether you
really do want to cancel.
Select “Yes” or “No”.
If you select “Yes”, individualization will
be canceled. The data from the part at
which you exited is not saved.
If you select “No”, the part at which you
stopped begins again.
Deleting existing individualization data
Select “Vehicle”
“System Settings”

“Voice Control”
“Delete individu-
alization”.
A prompt appears asking whether you
really do want to delete.
Select “Yes” or “No”.
The individualization data will either be
deleted or not, depending on your se-
lection.
Setting the system language
Select “Vehicle”
“System Settings”

“Language”.
The language list appears. A dot R in-
dicates the current setting.
Changing setting: Select desired lan-
guage.
The language is set.
Assigning the favorite button
1Favorite buttonYou can assign the following predefined
functions to the favorite buttonP:

“Rear Window Sunshade” (page 503)
You can use the favorite button to ex-
tend or retract the rear window sun-
shade. This is the default setting.

“Display OFF” (page 235)
You can use the favorite button to
switch the COMAND display on or off.

“Repeat Navigation Command”
(
page 213)
You can use the favorite button to re-
call the last announcement issued by
the navigation system.
Select “Vehicle”
“System Settings”

“Favorite”.
The list of predefined functions appears.
The dot R in front of the list entry indi-
cates the current setting.
Changing setting: Rotate ymz and
select desired function.
Saving setting and exit the menu:
Press n.

417 Controls in detail
Instrument cluster
Instrument cluster
A full view illustration of the instrument
cluster can be found in the “At a glance”
section of this manual (
page 28).
The instrument cluster is activated when
you:

open a door

switch on the ignition (page 344)

switch on the exterior lamps
The language setting for the multifunction
display can be changed via COMAND
(
page 238).Adjusting instrument cluster display
illumination
1Knob
Brightening illumination: Turn
knob1 clockwise.
Dimming illumination: Turn knob1
counterclockwise.
Coolant temperature gauge
The coolant temperature gauge is on the
left side in the instrument cluster
(
page 28).
Warning!G
No messages will be displayed if either the
instrument cluster or the multifunction dis-
play is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warning/
indicator lamps, malfunction/warning mes-
sages or the failure of any systems. Driving
characteristics may be impaired.
If you must continue to drive, please do so
with added caution. Contact an authorized
Mercedes-Benz Center as soon as possible.
iThe instrument cluster illumination is
dimmed or brightened automatically to suit am-
bient light conditions.
The instrument cluster illumination will also be
adjusted automatically when you switch on the
vehicle’s exterior lamps.
Warning!G

Driving when your engine is overheated
can cause some fluids which may have
leaked into the engine compartment to
catch fire. You could be seriously
burned.

Steam from an overheated engine can
cause serious burns and can occur just
by opening the hood. Stay away from
the engine if you see or hear steam com-
ing from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out


744 Index
Headlamp cleaning system 375, 548
Washer fluid 727, 733
Headlamps
Automatic control 372
Automatic headlamp mode 282
Cleaning lenses 589
Cleaning system 548
Manual headlamp mode 282
Messages in display 653
Refilling washer fluid 549
Headliner and shelf below rear window,
Cleaning and care of 594
Heated steering wheel* 360
Height adjustments
Vehicle level (ABC*) 443
High beam
Replacing bulbs 679
High beam flasher 375
High beam headlamp
Indicator lamp 29High mounted brake lamp 679
High-performance brake system
(AMG vehicles only) 529
Hood 541
Message in display 649
Opening 541
Horn 27
Hydroplaning 531
I
Identification labels 712
Identification Number, Vehicle (VIN) 713
Ignition 344, 346
Switching on 344
Switching on, KEYLESS-GO* 346
Immobilizer 81
Indicator lamps see Lamps, indicator and
warning
Individualization
Voice Control* 330
Infant and child restraint systems see Chil-
dren in the vehicle
Inflation pressure see Tires
Infrared reflecting windshield 524
Inside door handle 341Instrument cluster 28, 417
Coolant temperature gauge 29, 417
Fuel gauge 29
Illumination 417, 463
Lamps 598
Multifunction display 264
Outside temperature indicator 418
Selecting the language
(COMAND) 238
Interior lighting 378
Activating automatic control 378
Ambient lighting (COMAND) 247
Deactivating automatic control 378
Delayed switch-off (COMAND) 248
In the rear 379
Reading lamps in the front 379
Reading lamps in the rear 379
Interior rear view mirror
Adjusting 361
Auto-dimming 363
Interior storage spaces see Storage com-
partments

746 Index
ESP®29, 599, 604
Front passenger front air bag off 50,
610
Fuel reserve 605
High beam headlamp 29
Maintenance service indicator 582
Park Assist* 29
Parktronic* 29
Seat belt telltale 29, 605
SRS 29, 607
TPMS* malfunction telltale 29, 608
Turn signals 29
Language (COMAND) 238
LATCH-type child seat anchors see
Children in the vehicle
Lever
For automatic transmission
(gear selector lever) 399
For cruise control 420
For DISTRONIC Plus* 430
License plate lamps
Messages in display 655
Replacing bulbs 679
Light alloy wheels, Cleaning 593Light sensor
Message in display 654
Lighter see Cigarette lighter
Lighting 371
Automatic headlamp mode 372
COMAND display illumination 87
Corner-illuminating lamps 376
Courtesy lighting 380
Daytime running lamp mode 373
Door entry lamps 379
High beam flasher 375
Instrument cluster illumination 417,
463
Interior 378
Manual headlamp mode 372
Trunk 380
Limp-home mode 416
Loading see Vehicle loading
Locator lighting (COMAND) 243
Lock button
Door handle (KEYLESS-GO*) 338,
388
Key, SmartKey 332
Key, SmartKey with
KEYLESS-GO* 335Locking 394
Automatic central locking
(COMAND) 245
Vehicle in an emergency 672
Locking knob 341
Loss of
Key, Mechanical 340
Key, SmartKey 340
Key, SmartKey with
KEYLESS-GO* 340
Service and Warranty Information
Booklet 711
Low beam headlamps
Replacing bulbs 679
Lowering
Vehicle 690
Lubricants 724
Lumbar support (COMAND) 260

754 Index
Steering wheel gearshift control
Automatic transmission 411
Stolen Vehicle Recovery services 518
Storage compartments 494
Cup holder 498
Front armrest 495
Parcel net 496
Rear armrest 496
Ruffled storage pockets 498
Storage compartment in front
armrest 495
Storage tray/telephone* compartment
in front armrest 495
Under the front seats 495
Storing tires 552
Summer opening feature 385
Sun visors 502
Sunroof see Power tilt/sliding sunroof
Sunshades
Extending or retracting rear window
sunshade (COMAND) 249
Extending/retracting rear window
sunshade 503
Opening or closing rear side window
sunshades 385Suspension tuning
Setting (ABC*) 442
Setting (Airmatic) 440
Symbols used in this operator’s
manual 18
System settings (COMAND)
Bluetooth
® settings 239
Display 235
Favorite button 238
Menu overview 235
Reset 241
Setting the system language 238
Time settings 235
Voice Control* settings
(COMAND) 237T
Tachometer 418
Overspeed range 418
Tail lamps
Cleaning lenses 589
Messages in display 657
Tar stains 586
Tele Aid 510
Automatic Maintenance Call 518
Call priority 516
Emergency calls 511
Hands-free microphone 33
Information 515
Information button 513
Initiating an emergency call
manually 513
Messages in display 664
Remote door lock 517
Remote door unlock 517
Roadside Assistance 514
Roadside Assistance button 513
SOS button 513
Stolen Vehicle Recovery
services 518
System self-check 511