2008 MERCEDES-BENZ S-Class change language

Contents
Back to the film ............................ 139
Setting the language and
audio format ................................ 139
Subtitles and camera angles ........ 140
Interactive content ....................... 140
COMAND telephone* ........................ 141
Safety precautions ....................... 141
General notes............................... 141
Switching telephone on or off ...... 143
Activating telephone mode .......... 144
Telephone keypad ........................ 144
“911” emergency call................... 145
Entering the PIN ........................... 146
Entering the PIN2 ......................... 147
Entering the PUK/PUK2............... 147
Entering the unlock code ............. 147
Telephone submenu overview ...... 148
Main telephone menu .................. 149
Mailbox ........................................ 149
Call lists ....................................... 150
Incoming call ................................ 152
Making an outgoing call ............... 153
Functions during a single-call
connection ................................... 155
Transferring a call ........................ 157
COMAND phone book .................. 158COMAND address book ................ 167
Bluetooth
® settings....................... 180
SMS messages
(Short Message Service) ............... 183
COMAND navigation ........................... 187
Safety precautions ........................ 187
COMAND navigation (introduction) .... 188
Map software ................................ 188
Updating the map software........... 188
Updating process .......................... 188
Loading a DVD into the
DVD changer................................. 189
Updating ....................................... 190
General notes ............................... 192
Input restrictions .......................... 193
Navigation system menu overview 194
Calling up the map display and
switching to navigation mode ....... 195
Basic settings ............................... 198
COMAND navigation system
(entering a destination) ...................... 202
Entering a destination by the
address ......................................... 202
Entering a destination from the
destination memory ...................... 223Entering a destination from the
list of last destinations.................. 225
Entering a destination
from the map ................................ 225
Entering a stopover....................... 226
COMAND navigation system
(Point of interest entry) ...................... 229
Entering a POI in the
surrounding area .......................... 229
Entering a POI in the
surroundings of a given city .......... 229
Entering a POI in
a different region .......................... 229
Designating a POI category........... 230
Entering a POI from the map ........ 236
COMAND navigation system
(route guidance) ................................. 237
Route guidance ............................. 237
Examples of displays and
announcements for
a driving maneuver ....................... 237
Example of a display
without driving maneuvers............ 239
Destination or destination area
reached ........................................ 239
Partially digitized areas ................. 240

161 Control systems
COMAND telephone*
Closing the COMAND phone book
In the smart speller, select “Back”.
or

Press back button L in the center
console (
page 88).
Selecting an entry in the COMAND
phone book
Selecting entries using the smart speller

Switch from the list to the smart speller
if necessary.

Changing smart speller language:
Select !.

Select desired language.

Changing smart speller character
set: Select #.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.

Entering characters: Select the char-
acters of the entry you are searching
for one by one.

Deleting individual characters: Se-
lect ) and briefly press n.
Each time you enter or delete a charac-
ter, the closest match will be displayed
at the top of the list.

Deleting an entire entry: Select )
and press and hold n until the entry is
deleted.

Canceling search: Switch from the
smart speller to the list.
The entry at the top of the list is auto-
matically highlighted.Selecting using the list

If necessary, switch from the smart
speller to the list.

Rotate ymz or slide qmr until the de-
sired entry is highlighted.
Selecting subentries

Select an entry with the + symbol and
press n.
The + symbol changes to / and the
subentries are displayed.

Rotate ymz or slide qmr until the de-
sired subentry is highlighted.

163 Control systems
COMAND telephone*
1Data field
2Input mark (cursor)
3Input characters
Changing data field: Slide qmr re-
peatedly until desired data field is high-
lighted.
or

Select [ or ] repeatedly until de-
sired data field is highlighted.

Entering data into a field: Select all
characters one by one from the input
characters line 3.

Toggling upper and lower case for
the input characters: Select & or
(.

Changing language for the input
characters: Select !.

Select desired language.

Changing character set for the input
characters: Select #.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.

Displaying special characters as in-
put characters: Select !
“Sym-
bols”.

Returning input characters to nor-
mal characters: Select !
the
desired language.

Moving cursor in the data field:
SelectY or Z.

Deleting individual characters:
Select) and briefly press n.
The character to the left of the cursor is
deleted.

Deleting an entire entry: Select )
and press and hold n until the entry is
deleted.

Saving an entry: Select ?.

Canceling an entry: Select “Back”.
If one of the data fields contains data, a
prompt will appear asking whether you
want to save the entry.
Select “Yes” or “No”.
The entry will either be saved or
not, depending on your selection.

169 Control systems
COMAND telephone*
Illustration: input menu for private data1To switch between work and home
data ( or symbol)
2Selected data field with input mark
(cursor)
3Display of set data type – in example
display, home data is set ( symbol
and “Home” display)
4Input characters

Switching between private and
business data: Select symbol 1.
The display switches to private or busi-
ness data, depending on the previous
status.

Changing data field: Slide rmq re-
peatedly until desired entry is highlight-
ed.
or

Select [ or ] repeatedly until de-
sired entry is highlighted.

Entering data into a field:
Select desired characters one by one
from the input characters.

Toggling upper and lower case for
the input characters: Select& or
(.

Changing language for the input
characters: Select!.

Select desired language.

Changing character set for the input
characters: Select#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.

Moving cursor in the data field:
SelectY or Z.

Deleting individual characters:
Select) and briefly press n.
The character to the left of the cursor is
deleted.

Deleting an entire entry: Select)
and press and hold n until the entry is
deleted.

Saving an entry: Select?.


171 Control systems
COMAND telephone*
Entries with the symbol contain com-
plete, navigable address data from the nav-
igation system that correspond to digital
map data. It is possible to quickly start
route guidance to these types of entry
(page 176).
Switching from the smart speller to the
list

Slide mq repeatedly or press n until
the smart speller is hidden.
or

Select ?.
Switching from the list to the smart
speller

Select “Back” from the list.Searching via the smart speller

Switch from the list to the smart speller
if necessary.

Changing smart speller language:
Select!.

Select desired language.

Changing smart speller character
set: Select#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.

Entering characters: Select the char-
acters one by one of the entry you are
searching for.

Deleting individual characters:
Select) and briefly press n.
Each time you enter or delete a charac-
ter, the closest match will be displayed
at the top of the list.

Deleting an entire entry: Select)
and press and hold n until the entry is
deleted.

Canceling search: Switch from the
smart speller to the list (
page 171).
The entry at the top of the list is auto-
matically highlighted.

Going back to main address book
display: If necessary, switch from the
list to the smart speller (
page 171)
and select “Back” in the smart speller.
Searching via the list

If necessary, switch from the smart
speller to the list (
page 171).

Rotate ymz or slide qmr until desired
entry is highlighted on the list.

223 Control systems
COMAND navigation system (entering a destination)
Entering a destination from the destination memory
Select “Navi”
“Destination”

“From Memory”.
The destination memory list appears ei-
ther with or without the input charac-
ters (
page 224). Whether the input
characters appear depends on the
number of entries in the destination
memory.
Destination memory list with input
characters
When this list appears, the input charac-
ters 4 are automatically activated.1Top list entry based on the input data
up to that point
2Characters entered by the user
3Characters automatically added by the
system
4Input characters
5Currently non-selectable characters
6Destination memory list
7Currently selected character
8Currently selectable charactersWhile the characters are being selected as
described below, the top list entry 1 al-
ways shows the destination which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements characters 2 entered by the
user with appropriate characters 3.

Changing language for the input
characters: Select!.

Select desired language.

Changing character set for the input
characters: Select#.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.

Selecting characters: Slide omp or
rotate ymz.

Confirming character selection:
Press n.
i
The destination memory always contains an
entry called “My Address”. You can save your
home address, for example, under this entry
(
page 251).
i
In the list of input characters 4, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the content of the destination
memory.


444 Controls in detailInstrument clusterA full view illustration of the instrument
cluster can be found in the “At a glance”
section of this manual (
page 28).
The instrument cluster is activated when
you:


open a door


switch on the ignition (
page 370)


switch on the exterior lamps
The language setting for the multifunction
display can be changed via COMAND
(
page 262).Adjusting instrument cluster display
illumination
1Knob

Brightening illumination: Turn
knob1 clockwise.

Dimming illumination: Turn knob1
counterclockwise.
Coolant temperature gauge
The coolant temperature gauge is on the
left side in the instrument cluster
(page 28).
Warning!
G
No messages will be displayed if either the
instrument cluster or the multifunction dis-
play is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warning/
indicator lamps, malfunction/warning mes-
sages or the failure of any systems. Driving
characteristics may be impaired.
If you must continue to drive, please do so
with added caution. Contact an authorized
Mercedes-Benz Center as soon as possible.i
The instrument cluster illumination is
dimmed or brightened automatically to suit am-
bient light conditions.
The instrument cluster illumination will also be
adjusted automatically when you switch on the
vehicle’s exterior lamps.
Warning!
G


Driving when your engine is overheated
can cause some fluids which may have
leaked into the engine compartment to
catch fire. You could be seriously
burned.


Steam from an overheated engine can
cause serious burns and can occur just
by opening the hood. Stay away from
the engine if you see or hear steam com-
ing from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out