501 Practical hints
Towing the vehicle
Remove the KEYLESS-GO* start/stop
button from the starter switch
(
page 41).
Insert the SmartKey with
KEYLESS-GO* into the starter switch.
Switch on the ignition.
Depress the brake pedal.
Shift the automatic transmission to
neutral positionN.
Release the brake pedal.
If engaged, release the parking brake
(
page 57).
Switch off the ignition and leave the
SmartKey with KEYLESS-GO* in the
starter switch.
Installing towing eye bolt
Depending on whether you are towing a
vehicle or you are being towed, the towing
eye bolt can be screwed into threaded
holes which are located behind covers on
the right-hand side of each bumper.
1Cover!Towing of the vehicle should only be done
using the properly installed towing eye bolt.
Never attach a tow cable, tow rope or tow rod to
the vehicle chassis, frame or suspension parts.
iTo signal turns while being towed with
hazard warning flasher in use, set the starter
switch to position2 and activate combination
switch for left or right turn signal in usual manner
– only the selected turn signal will operate.
Upon canceling the turn signal, the hazard warn-
ing flasher will operate again.
504 Practical hints
Fuses
The electrical fuses in your vehicle serve to
switch off malfunctioning power circuits.
If a fuse is blown, the components and sys-
tems secured by that fuse will stop operat-
ing.If a newly inserted fuse blows again, have
the cause determined and rectified by an
authorized Mercedes-Benz Light Truck
Center.
A fuse chart explains the fuse allocation
and fuse amperages. It is located in the
cargo compartment with the vehicle tool
kit (
page 448).
The electrical fuses are located in different
fuse boxes:
Fuse box in engine compartment
(
page 505)
Fuse box in cargo compartment
(
page 505)
Fuse box in passenger compartment
(
page 506)Before replacing fuses:
Apply parking brake (page 65).
Make sure the automatic transmission
is set toP (
page 185).
The gear position indicator in the multi-
function display should be on
P.
Turn off all electrical consumers.
Turn off the engine (page 40).
Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
Open the driver’s door (this puts
the starter switch in position0,
same as with the SmartKey re-
moved from the starter switch). The
driver’s door then can be closed
again.
Warning!G
Only use fuses approved by Mercedes-Benz
with the specified amperage for the system
in question and do not attempt to repair or
bridge a blown fuse. Using other than ap-
proved fuses or using repaired or bridged
fuses may cause an overload leading to a
fire, and/or cause damage to electrical
components and/or systems. Have the
cause determined and remedied by an au-
thorized Mercedes-Benz Light Truck Center.
iA blown fuse must be replaced by an appro-
priate spare fuse (recognizable by its color or the
fuse rating given on the fuse) of the amperage
recommended in the fuse chart. Any
Mercedes-Benz Light Truck Center will be glad to
advise you on this subject.
541 Index
Locking/unlocking 38, 68, 110
Locking/unlocking, Global
setting 112
Loss of 118
Messages in the multifunction
display 437
Opening the power windows
(Summer opening feature) 237
Opening the tilt/sliding sunroof
(Summer opening feature) 237
Remote control 110
Replacing batteries 461
Selective setting 112
Starter switch positions 40
Starting the engine 54
Turning off the engine 67
Key, SmartKey with KEYLESS-GO*
Batteries 118, 461
Battery check lamp 113
Checking battery condition 118
Closing the power windows
(Convenience closing feature) 238
Closing the tilt/sliding sunroof
(Convenience closing feature) 238Closing/locking, Power
tailgate* 124
Factory setting 116
Important notes 115
Locking/unlocking 39, 68, 113
Locking/unlocking, Global
setting 116
Loss of 118
Messages in the multifunction
display 436, 437
Opening the power windows
(Summer opening feature) 237
Opening the tilt/sliding sunroof
(Summer opening feature) 237
Remote control 113
Replacing batteries 461
Selective setting 117
Start/stop button 41
Starter switch positions 40, 41
Starting the engine 55
Turning off the engine 67
Kickdown 190
Kilopascal 380L
Labels 510
Certification 510
Emission control information 511
Engine number 511
Paintwork code 510
Vehicle Identification Number
(VIN) 510
Lamp sensor see Light sensor
Lamps, exterior 464
Front 464
Light sensor, Messages in the
multifunction display 438
Messages in display 438
Messages in the multifunction
display 438, 440, 442
Rear 464
Switch 135
