2008 MERCEDES-BENZ ML SUV technical data

Vehicle weights
363Vehicle weights
The unladen weight includes the driver (68 kg), luggage (7 kg) and all fluids (fuel tank 90% full). Items of optional equipment increase the
unladen weight and reduce the maximum payload. Specific weight specifications can be found on the vehicle identification plate
(Y page 350). ML 350 ML 500 ML 63 AMG
Unladen weight (in accordance
with EC directive) 2,135 kg 2,185 kg 2,310 kg
Maximum permissible gross
vehicle weight 2,830 kg 2,830 kg 2,880 kg
Maximum permissible front
axle load 1,400 kg 1,400 kg 1,440 kg
Maximum permissible rear axle
load
Towing a trailer 1,600 kg 1,600 kg 1,600 kg
1,700 kg 1,700 kg 1,600 kg
Maximum roof load 100 kg 100 kg 100 kg
Maximum permissible load 695 kg 645 kg 570 kg
ML 280 CDI ML 320 CDI ML 420 CDI
Unladen weight (in accordance
with EC directive) 2,185 kg 2,185 kg 2,315 kg
Maximum permissible gross
vehicle weight 2,830 kg 2,830 kg 2,950 kg Technical data
164_AKB; 5; 5, en-GB
wobuchh
,V ersion: 2.10.6
2008-05-11T11:55:12+02:00 - Seite 363 ZDateiname: 6515_4293_02_buchblock.pdf; preflight

Vehicle weights
364 ML 280 CDI ML 320 CDI ML 420 CDI
Maximum permissible front
axle load 1,400 kg 1,400 kg 1,470 kg
Maximum permissible rear
axle load
Towing a trailer 1,600 kg 1,600 kg 1,600 kg
1,700 kg 1,700 kg 1,700 kg
Maximum roof load 100 kg 100 kg 100 kg
Maximum permissible load 645 kg 645 kg 635 kgTechnical data
164_AKB; 5; 5, en-GB
wobuchh
,V ersion: 2.10.6
2008-05-11T11:55:12+02:00 - Seite 364 Dateiname: 6515_4293_02_buchblock.pdf; preflight

Trailer coupling*
365Trailer coupling*
Mounting dimensions
G
Risk of accident
Only have a trailer coupling retrofitted at a
qualified specialist workshop which has the
necessary specialist knowledge and tools
to carry out the work required. Mercedes-
Benz recommends that you use a
Mercedes-Benz Service Centre for this pur-
pose. In particular, work relevant to safety
or on safety-related systems must be car-
ried out at a qualified specialist workshop.
! If you have a trailer tow hitch retrofitted,
changes to the cooling system may be nec-
essary, depending on the vehicle type.
If you have a trailer tow hitch retrofitted,
observe the anchorage points on the chas-
sis frame. Anchorage points for the trailer coupling
1 Anchorage points
2 Overhang dimension
For trailer tow hitches fitted at the factory, the
overhang dimension is 1,065 mm. Trailer loads
All models
Permissible trailer load,
unbraked 750 kg
Permissible trailer load,
braked
59 3,500 kg
Maximum drawbar nose-
weight
60 140 kg
59
At a minimum gradient-climbing capability of 12% from a standstill
60 The drawbar noseweight is not included in the trailer load. Technical data
* optional
164_AKB; 5; 5, en-GB
wobuchh
,V ersion: 2.10.6
2008-05-11T11:55:12+02:00 - Seite 365 ZDateiname: 6515_4293_02_buchblock.pdf; preflight

Service products and capacities
366 Service products and capacities
Notes on service products and capaci-
ties
Service products are:
R fuels (e.g. petrol, diesel)
R lubricants (e.g. engine oil, transmission oil)
R coolant
R brake fluid
R windscreen washer fluid
Mercedes-Benz recommends that you only
use those products which have been tested
and specially approved by Mercedes-Benz for
your vehicle and are listed in the Mercedes-
Benz Owner's Manual in the relevant chapter
since:
R parts and service products are matched
R damage caused by the use of non-approved
service products is not covered by the war-
ranty
You can recognise service products approved
by Mercedes-Benz by the following inscrip-
tion on the containers:
R MB-Freigabe (e.g. MB-Freigabe 229.51)
R MB Approval (e.g. MB Approval 229.51) Other designations or recommendations that
relate to a level of quality or a specification in
accordance with an MB Approval have not
necessarily been approved by Mercedes-
Benz.
You can obtain further information from any
Mercedes-Benz Service Centre. G
Risk of injury
When handling, storing and disposing of
any service products, please observe the
relevant regulations, as you could other-
wise endanger yourself and others.
Keep service products away from children.
To protect your health, do not allow service
products to come into contact with your
eyes or open wounds. See a doctor imme-
diately if any service product is swallowed. H
Environmental note
Dispose of service products in an environ-
mentally-responsible manner. Fuels
G
Risk of explosion
Fuel is highly flammable. Fire, naked flames
and smoking are therefore prohibited when
handling fuels.
Switch off the engine and the auxiliary heat-
ing* before refuelling. G
Risk of injury
Do not allow fuel to come into contact with
skin or clothing.
Allowing fuels to come into direct contact
with your skin or inhaling fuel vapours is
damaging to your health.
Tank capacity Total capacity 95 l
Of which reserve
fuel Approximately 13 l
Of which reserve
fuel
ML 63 AMG Approximately 15 l
!
Do not use petrol to refuel vehicles with a
diesel engine. Do not use diesel to refuel Technical data
* optional
164_AKB; 5; 5, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T11:55:12+02:00 - Seite 366Dateiname: 6515_4293_02_buchblock.pdf; preflight

Service products and capacities
367
vehicles with a petrol engine. Never mix
diesel with petrol. Even small amounts of
the wrong fuel result in damage to the
injection system. Damage resulting from
adding the wrong fuel is not covered by the
warranty.
More information about refuelling and fuels
can be found in the "Operation" section. Notes on fuel consumption
The vehicle will use more fuel than usual in
the following situations: R
at very low temperatures
R in urban traffic
R on short trips
R when towing a trailer
R in mountainous terrain
The consumption figures have been deter-
mined according to EU Directive
RL 80 /1268 /EEC.
i Only for certain countries: the respective
current consumption and emission values
of your vehicle can be found in the COC
papers (EC-CERTIFICATE OF CONFORM-
ITY). These documents are supplied when
the vehicle is delivered.
! Do not use any special additives, as they
can cause malfunctions and engine dam-
age. Damage resulting from the use of such additives is not covered by the Mercedes-
Benz warranty. H
Environmental note
CO 2(carbon dioxide) is the gas which sci-
entists believe to be principally responsible
for global warming (the greenhouse effect).
Your vehicle's CO 2emissions are directly
related to fuel consumption and therefore
depend on:
R efficient use of the fuel by the engine
R driving style
R other non-technical factors, such as envi-
ronmental influences or road conditions
You can minimise your vehicle's CO 2emis-
sions by driving carefully and having it serv-
iced regularly. Technical data
164_AKB; 5; 5, en-GB
wobuchh
,V ersion: 2.10.6
2008-05-11T11:55:12+02:00 - Seite 367 ZDateiname: 6515_4293_02_buchblock.pdf; preflight

Service products and capacities
368 Fuel consumption
The consumption figures have been determined according to applicable EU directives and do not refer to one specific vehicle. Deviations from
these values may occur under normal operating conditions. ML 350 ML 500 ML 63 AMG
Urban 14.9 – 15.4 l/100 km 17.6 l/100 km 24.1 l/100 km
Extra-urban 9.0 – 9.7 l/100 km 10.0 l/100 km 12.2 l/100 km
Overall (NEDC) 11.2 – 11.8 l/100 km 12.8 l/100 km 16.5 l/100 km
CO
2emissions 266 – 281 g/km 304 g/km 392 g/km
ML 280 CDI ML 320 CDI ML 420 CDI
Urban 11.8 – 12.8 l/100 km 11.9 – 12.8 l/100 km 14.2 – 14.6 l/100 km
Extra-urban 7.6 – 7.8 l/100 km 7.8 l/100 km 8.5 – 9.1 l/100 km
Overall (NEDC) 9.1 – 9.6 l/100 km 9.3 – 9.6 l/100 km 10.6 – 11.0 l/100 km
CO
2emissions 241 – 254 g/km 245 – 254 g/km 279 – 292 g/kmTechnical data
164_AKB; 5; 5, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T11:55:12+02:00 - Seite 368Dateiname: 6515_4293_02_buchblock.pdf; preflight

Service products and capacities
369Engine oil
A list of engine oils tested and approved in accordance with the Mercedes-Benz Specifications for Service Products is available from any
Mercedes-Benz Service Centre. Engine oils which have been approved by Mercedes-Benz have the MB Sheet number indicated on the oil
container. The table shows which MB Sheet Number applies to which engine: ML 350 ML 500 ML 63 AMG
MB Sheet Number 229.3/229.5 229.3/229.5
229.5
61 ML 280 CDI ML 320 CDI ML 420 CDI
MB Sheet number (vehicles
without a diesel particle fil-
ter) 228.3/228.5/228.51
229.3/229.31/229.5/229.51 228.3/228.5/228.51
229.3/229.31/229.5/229.51 —
MB Sheet Number
(vehicles with a diesel par-
ticle filter) 228.51/229.31/229.51 228.51/229.31/229.51 228.51/229.31/229.51
i
In the event that the:
R engine oil brand
R grade (MB Sheet number)
R SAE classification (viscosity)
is not available, you can use another min-
eral or synthetic engine oil which has been
approved by Mercedes-Benz. Mixing oils reduces the benefits of high-
grade engine oil.
! Do not use lubricant additives as they can
lead to increased wear and damage to
mechanical assemblies. The use of lubri-
cant additives will result in a restriction of
your warranty. !
Engine oils for vehicles without a diesel
particle filter may also be used temporarily
in vehicles with a diesel particle filter if the
engine oil listed is not available. You must
then have an oil change carried out as soon
as possible.
61 Restriction: only SAE 0W-40 engine oils may be used. Technical data
164_AKB; 5; 5, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T11:55:12+02:00 - Seite 369 ZDateiname: 6515_4293_02_buchblock.pdf; preflight

Service products and capacities
370
Capacities The following values refer to an oil change including the oil filter.
Engine with oil
filter ML 350 ML 500
ML 63 AMG
62 ML 280 CDI ML 320 CDI ML 420 CDI
Replacement
amount 8.0 l 9.0 l 9.7 l 8.5 l 8.5 l 11.5 l
Coolant
The coolant is a mixture of water and anti-
freeze/corrosion inhibitor. It performs the
following tasks:
R anti-corrosion protection
R antifreeze protection
R raising the boiling point
i When the vehicle is first delivered, it is
topped up with a coolant that will ensure
adequate antifreeze and corrosion protec-
tion.
! Only top up with coolant that has been
premixed with the desired antifreeze pro-
tection. You could otherwise damage the
engine. There is more information about coolant
and topping it up on Mercedes-Benz Spec-
ifications for Service Products Sheet
310.1.
! Always use a suitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the cooling system will not be
sufficiently protected from corrosion, and
the boiling point will be too low.
If antifreeze/corrosion inhibitor is present in
the correct concentration, the boiling point of
the coolant will be around 130 °C.
The antifreeze/corrosion inhibitor concentra-
tion in the cooling system should: R
be at least 50%. This will protect the cooling
system against freezing down to around
–37 °C.
R not exceed 55% concentration (antifreeze
protection down to –45 °C), otherwise heat
will not be effectively dissipated.
If the vehicle has lost coolant, top it up with
equal amounts of water and antifreeze/cor-
rosion inhibitor. Mercedes-Benz recom-
mends using an antifreeze/corrosion inhibi-
tor which has been approved for Mercedes-
Benz vehicles.
! The cooling system contains a filling
which must be renewed after 15 years, or
after 250, 000 km at the latest. Have the
renewal confirmed in the Service Booklet.
62 Engine with external oil cooler. Technical data
164_AKB; 5; 5, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T11:55:12+02:00 - Seite 370Dateiname: 6515_4293_02_buchblock.pdf; preflight