2008 MERCEDES-BENZ G55AMG engine

63
Getting started
Parking and locking
1
Parking brake lever
Pull parking brake lever 1 up as many
notches as possible.
When the ignition is switched on or the
engine is running, the brake warning
lamp ; (USA only) or 3 (Canada
only) in the instrument cluster comes
on.
Warning!G
Getting out of your vehicle with the gear
selector lever not fully engaged in park
position P is dangerous. Also, when parked
on an incline, park position P alone may not
prevent your vehicle from moving, possibly
hitting people or objects.
Always set the parking brake in addition to
shifting to park position P (
page 164).
W h e n p a r k e d o n a n i n c l ine, turn front wheels
towards the road curb.
Warning!G
When leaving the vehicle, always remove the
SmartKey from the starter switch, take it
with you, and lock the vehicle. Do not leave
children unattended in the vehicle, or with
access to an unlocked vehicle. Children
could release the parking brake and/or
move the gear selector lever from park
position P, either of which could result in an
accident and/or seri ous personal injury.
W463.boo Seite 63 Montag, 19. November 2007 8:41 08

64 Getting started
Parking and locking
Switching off headlamps
Turn the exterior lamp switch toM
(
page 56).
For more information, see “Lighting”
(
page 117).
Turning off engine
Move the gear selector lever to park
position P. Apply the parking brake (
page 62).
Turn SmartKey in the starter switch to
position
0.
Remove the SmartKey from the starter
switch.
The immobilizer is activated.
Releasing seat belts
Press seat belt release button
(
page 50).
Allow the retractor to completely
rewind the seat belt by guiding latch
plate.
Warning!G
Do not turn off the engine before the vehicle
has come to a complete stop. With the
engine not running, there is no power assis-
tance for the brake and steering systems. In
this case, it is important to keep in mind that
a considerably higher degree of effort is
necessary to brake and steer the vehicle.
iAlways set the parking brake in addition to
shifting to park position P (
page 164).
On slopes, turn the front wheels towards the
road curb.
iThe SmartKey can only be removed from the
starter switch with the gear selector lever in park
position P and the SmartKey in starter switch
position 0.
!M a k e s u r e t h e s e a t b e l t r e t r a c t s f u l l y s o t h a t
the seat belt and/or latch plate cannot get
caught or pinched in the door or in the seat
mechanism. This can damage the seat belt and
impair the effectiveness of the seat belt, and/or
cause damage to the door and/or door trim
panel. Such damage is not covered by the
Mercedes-Benz Limited Warranty.
Damaged seat belts must be replaced. Contact
an authorized Mercedes-Benz Light Truck
Center.
W463.boo Seite 64 Montag, 19. November 2007 8:41 08

68 Safety and Security
Occupant safety
In this section you will learn the most
important facts about the restraint
systems of the vehicle.

Seat belts (page 74)

Child restraints (page 83)

Lower Anchors and Tethers for
CH
ildren (LATCH) (page 82)
Additional protection potential provide

Supplemental Restraint System (SRS)
with

Air bags (page 70)

Air bag control unit (with crash
sensors)

Emergency Tensioning Device
(ETD) for seat belts (
page 77)
Air bag system components with

Front passenger front air bag off
indicator lamp (
page 80)

BabySmartTM air bag deactivation
system (
page 80) Although independent systems, their
protective functions work in conjunction
with each other.
The
1 indicator lamp in the instrument
cluster (
page 27) comes on:

for about 4 seconds when you turn the
SmartKey in the starter switch to
position 1.

for about 4 seconds when you start the
engine by turning the SmartKey. The SRS components are in operational
readiness if the
1indicator lamp is not
lit when the engine is running.
A malfunction in the system has been
detected if the 1 indicator lamp:

fails to go out after approximately
4 seconds.

does not come on at all.

comes on after the engine was started
or while driving.
For more information, see “Practical hints”
(
page 332).
iFor information on infants and children
traveling with you in the vehicle and restraint
systems for infants and children, see “Children
in the vehicle” (
page 77).
iThe 1 indicator lamp remains lit if the
SmartKey is turned to position 2 and left there.
The indicator lamp will go out when you start the
engine.
W463.boo Seite 68 Montag, 19. November 2007 8:41 08

74 Safety and Security
Occupant safety
Window curtain air bags1 Window curtain air bag
The window curtain air bags are deployed:

on the impacted side of the vehicle

in impacts exceeding a preset deploy-
ment threshold

independently of the front air bags
The window curtain air bags are not
deployed in impacts which do not exceed
the system’s deployment threshold.
Seat belts
The use of seat belts and infant and child
restraint systems is required by law in all
50 states, the District of Columbia, the
U.S. territories and all Canadian provinces.
Even where this is not the case, all vehicle
occupants should have their seat belts fas-
tened whenever the vehicle is in motion.
When the engine is started, the seat belt
telltale < illuminates to remind you and
your passengers to fasten your seat belts.
If the driver’s seat belt is not fastened be-
fore the engine is started, the seat belt tell-
tale < illuminates and a warning chime
sounds for approximately 6 seconds when
the engine is started.
Always wear your seat belt. All vehicle oc-
cupants always need to have their seat
belts fastened and wear them properly. For more information, see “Fastening the
seat belts” (
page 48).
iFor information on infants and children
traveling with you in the vehicle and restraint
systems for infants and children, see “Children
in the vehicle” (
page 77).
Warning!G
Always fasten your seat belt before driving
off. Always make sure your passengers are
properly restrained, even those sitting in the
rear.
Failure to wear and properly fasten and
position your seat belt greatly increases
your risk of injuries and their likely severity
in an accident. You and your passengers
should always wear seat belts.
In the same crash, the po ssibility of injury or
death is lessened if you are properly wearing
your seat belt. Air bags can only protect as
they are designed if the occupants are prop-
erly wearing their seat belts.
W463.boo Seite 74 Montag, 19. November 2007 8:41 08

88 Safety and Security
Driving safety systems
Continuous steady brake pedal pressure
yields the advantages provided by the ABS,
namely braking power and the ability to
steer the vehicle.
On slippery road surfaces, the ABS will
respond even to light brake pressure. The
pulsating brake pedal can be an indication
of hazardous road conditions and func-
tions as a reminder to take extra care while
driving.
The - indicator lamp in the instrument
cluster (
page 26) comes on when you
turn the SmartKey to position 2. It goes
out when the engine is running. Braking
At the instant one of the wheels is about to
lock up, a slight pulsation can be felt in the
brake pedal, indicating
that the ABS is in
the regulating mode.
Keep firm and steady pressure on the
brake pedal while experiencing the
pulsation. Emergency brake maneuver
Keep continuous full pressure on the
brake pedal.
Warning!G
When the ABS is malf
unctioning, the BAS,
the EBB, the ESP®, and the 4-ETS are also
switched off. The basic driving and braking
functions are still available.
When the ABS is malfunctioning, the wheels
may lock during hard braking, reducing
steering capability and extending the brak-
ing distance.
W463.boo Seite 88 Montag, 19. November 2007 8:41 08

90 Safety and Security
Driving safety systems
For more information, see “Practical hints”
(
page 338).
4-ETS
The 4-Electronic Traction System (4-ETS)
improves vehicle’s ability to utilize avail-
able traction, especially under slippery
road conditions. The brakes are applied to
the spinning wheel and power is allowed to
flow to the wheel(s) with traction.
The 4-ETS function is available between
vehicle speeds of 0 mph (km/h) and
37 mph (60 km/h).
The ESP
® warning lampv in the instru-
ment cluster (
page 26) comes on when
you switch on ignition (
page 39). It goes
out when the engine is running.
The ESP
® warning lamp v starts to
flash at any vehicle speed, as soon as a tire
loses traction and the wheel begins to
spin.
Warning!G
The BAS cannot prevent the natural laws of
physics from acting on the vehicle, nor can
it increase braking ef ficiency beyond that
afforded by the condition of the vehicle
brakes and tires or the traction afforded.
The BAS cannot prevent accidents, includ-
ing those resulting from excessive speed in
turns, following another vehicle too closely,
or hydroplaning. Only a safe, attentive, and
skillful driver can prevent accidents. The
capabilities of a BAS equipped vehicle must
never be exploited in a reckless or danger-
ous manner which could jeopardize the
user’s safety or the safety of others.
Warning!G
When you see the ESP® warning lamp v
flashing in the instru ment cluster, then
proceed as follows:

While driving off, apply as little throttle
as possible.

While driving ease up on the accelera-
tor.

Adapt your speed and driving style to
the prevailing road conditions.
Failure to observe th ese guidelines could
cause the vehicle to skid.
The 4-ETS cannot prev ent accidents result-
ing from excessive speed.
W463.boo Seite 90 Montag, 19. November 2007 8:41 08

91
Safety and Security
Driving safety systems
For more information, see “Practical hints”
(
page 330).
EBB
The Electronic Brake Booster (EBB)
enhances braking effectiveness by allow-
ing the rear brakes to supply a greater
proportion of the braking
effort in straight
line braking circumstances without a loss
of vehicle stability.
For more information, see the “Practical
hints” section (
page 327).
ESP®
The Electronic Stability Program (ESP®) is
operational as soon as the engine is run-
ning and monitors the vehicle’s traction
(force of adhesive friction between the
tires and the road surface) and handling.
The ESP
® recognizes when a wheel is
spinning or if the vehicle starts to skid.
By applying the brakes to the appropriate
wheel and by limiting engine output, the
ESP
® works to stabilize the vehicle.
The ESP® is especially useful while driving
off and on wet or slippery road surfaces.
The ESP
® also stabilizes the vehicle during
braking and steering maneuvers.
The ESP
® warning lamp v in the instru-
ment cluster (
page 26) flashes when the
ESP® is engaged.
The ESP
® warning lamp v comes on
when you switch on ignition (
page 39).
It goes out when the engine is running.
!Operational or performance test must only
be conducted on a two-axle dynamometer. If
such tests are necessary, contact an authorized
Mercedes-Benz Light Truck Center. You could
otherwise seriously damage the brake system or
the transfer case which is not covered by the
Mercedes-Benz Limited Warranty.
!Because the ESP® operates automatically,
the engine and ignition must be shut off
(SmartKey in starter switch position 0 or 1)
when testing the parking brake on a brake test
dynamometer and such testing should be no
longer than 10 seconds.
Active braking action through ESP
® may
otherwise seriously damage the brake system
which is not covered by the Mercedes-Benz
Limited Warranty.
Warning!G
If the EBB is malfun ctioning, the brake
system is still functionin g. However, the rear
wheels may lock during hard braking, caus-
ing you to lose control over the vehicle and
possibly causing an accident. Adjust your
driving style to the non-operating status of
the EBB.
W463.boo Seite 91 Montag, 19. November 2007 8:41 08

92 Safety and Security
Driving safety systems
Warning!G
Never switch off the ESP® when you see the
ESP® warning lamp v flashing in the
instrument cluster. In this case proceed as
follows:

While driving off, apply as little throttle
as possible.

While driving ease up on the accelera-
tor.

Adapt your speed and driving style to
the prevailing road conditions.
Failure to observe these guidelines could
cause the vehicle to skid.
The ESP
® cannot prevent accidents result-
ing from excessive speed.
Warning!G
The ESP® cannot prevent the natural laws of
physics from acting on the vehicle, nor can
it increase the traction afforded. The ESP
®
cannot prevent accidents, including those
resulting from excessiv e speed in turns, fol-
lowing another vehicle too closely, or hydro-
planing. Only a safe, attentive, and skillful
driver can prevent accidents. The capabili-
ties of a ESP
® equipped vehicle must never
be exploited in a reckless or dangerous
manner which could jeopardize the user’s
safety or the safety of others.
!Operational or performance test must only
be conducted on a two-axle dynamometer. If
such tests are necessary, contact an authorized
Mercedes-Benz Light Truck Center. You could
otherwise seriously damage the brake system or
the transfer case which is not covered by the
Mercedes-Benz Limited Warranty.
!Because the ESP® operates automatically,
the engine and ignition must be shut off when
testing the parking brake on a brake test
dynamometer and such testing should be no
longer than 10 seconds.
Active braking action through ESP
® may
otherwise seriously damage the brake system
which is not covered by the Mercedes-Benz
Limited Warranty.
iThe ESP® will only function properly if you
use wheels of the recommended tire size
(
page 414).
iThe ABS, BAS, and ESP® are automatically
switched off when the differential locks are
switched on (
page 175).
W463.boo Seite 92 Montag, 19. November 2007 8:41 08