2008 MERCEDES-BENZ CLS63AMG stop start

[x] Cancel search: stop start

Page 273 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 272 Operation
Driving instructions
Power assistanceBrakes
To help prevent brake disk corrosion after 
driving on wet road surfaces (particularly 
salted roads), it is advisable to brake the 
vehicle w

Page 276 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 275 Operation
Driving instructions
Parking
TiresTreadwear indicators (TWI) are required by 
law. These indicators are located in six 
places on the tread circumference and 
become visible at a tread d

Page 308 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 307 Operation
Tires and wheels
Warning!G
The TPMS does not indicate a warning for 
wrongly selected inflation pressures. Always 
adjust tire inflation pressure according to 
the Tire and Loading Infor

Page 312 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 311 Operation
Tires and wheels
Tire inflation pressure warnings
If the system detects a significant loss of 
tire inflation pressure in one or more than 
one tire, a message appears in the multi-
func

Page 340 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 339 Operation
Vehicle care
Light alloy wheels
If possible, clean wheels once a week.
Use Mercedes-Benz approved Wheel 
Care, a soft bristle brush and a strong 
spray of water for cleaning the light a

Page 352 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 351 Practical hints
What to do if …
ProblemPossible cause/consequenceSuggested solution
lThe red distance warning lamp 
comes on while driving.You are too close to the vehicle in front 
of you to ma

Page 356 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 355 Practical hints
What to do if …
Warning!G
Each tire, including the spare (if provided), 
should be checked monthly when cold and 
inflated to the inflation pressure recom-
mended by the vehicle

Page 369 of 481

MERCEDES-BENZ CLS63AMG 2008 W219 Owners Manual 368 Practical hints
What to do if …
Display messagePossible cause/consequencePossible solution
PGear Selector Lever
In P PositionYou have tried to start the engine 
with the KEYLESS-GO* start/stop
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 49-56 next >