265 Controls in detail
Useful features
Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator’s manual.
Step 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.You have 30 seconds to initiate the follow-
ing two steps.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
Step 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
iSome garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.
458 Index
Automatic transmission
Accelerator position 173
Automatic shift program 175
Emergency operation (limp-home
mode) 182
Gear ranges 174
Gear selector lever 169
Gear selector lever control one-touch
gearshifting 176
Gear selector lever positions 171
Gear shifting malfunctions 182
Kickdown 173
Kickdown, manual shift program
CLS 63 AMG 181
Manual shift program
CLS 63 AMG 179
Program mode selector switch 175
Shifting procedure 170
Starting the engine 51
Steering wheel gearshift control
one-touch gearshifting* 177
Auxiliary bulbs 404
Messages in display 383B
Backrest
Seat 42
Seat, multicontour* 120
Backup lamps see Reverse lamps
Bar 324
BAS 90
Batteries, SmartKey
Checking battery condition 108
Replacing 402
Batteries, SmartKey with KEYLESS-GO*
Checking battery condition 108
Replacing 402
Batteries, vehicle 420
Charging 422
Disconnecting 421
Jump starting 423
Messages in display 372–373
Reconnecting 422
Reinstalling 422
Removing 421
Bead 324
Beverage holder see Cup holders
Bi-Xenon headlamps see
Headlamps 126
Block heater* (Canada only) 329Brake fluid
Checking 285
Brake lamps
Cleaning lenses 337
Replacing bulbs 406
Brake pads
Message in display 373
Brakes
High-performance brake system
(CLS 63 AMG only) 274
Warning lamp 347
Break-in period 270
Bulbs, replacing see Replacing bulbs
C
California retail buyers and lessees, impor-
tant notice for 11
Can holder see Cup holders
Capacities and recommended
fuels/lubricants 448
Cargo tie-down hooks 242
Carpets, cleaning 340
Catalytic converter 281
CD player 149
