2008 MERCEDES-BENZ CLS-Class wheel

83 Telephone*
Important notes

Always drive with extreme caution
when operating the telephone hands-
free.

For safety reasons, the cellular phone
handset should not be used to place or
receive a call while driving.

If the signal is very weak (display in the
status bar):

Wait until reception improves before
placing a call.

Close the windows and reduce all ex
-
ternal noise as much as possible when
using hands-free operation.

Make sure that the air vents are not
pointed in the direction of the micro
-
phones located in the overhead control
panel near the rear view mirror. Adjust
air vents and/or reduce blower speed
if necessary.

A brief disconnection from the cellular
network is not a malfunction, as this
can occur when the network switches
areas. The phone automatically at
-
tempts to again sign on with a network.

If the message
Enter
unlock
code
is
displayed, enter the unlock code
( page
88)
. Only then will you be able
to use all the telephone functions. You will still be able to make 911 emer
-
gency calls
( page
85)
if the tele
-
phone is locked.
The telephone cannot, or not yet, be used
in the following situations:

The telephone is already unlocked, but
it is not yet registered with the net
-
work. The message
NO SERV.
appears in the
status bar. The telephone automatical
-
ly attempts to register with a network.
If there is no network available, “911”
emergency calls can NOT be placed.

If you try to place an outgoing call, the
message
Call
not
possible
is dis
-
played temporarily.

If the message
Telephone
being
activated,
please
wait
is displayed,

If the message
Please
insert
phone
is
displayed.

Insert the cellular phone into the
telephone cradle.
iThis Operator's Manual describes op
-
eration of the telephone using the
COMAND control unit and the multi
-
function steering wheel. Unless other
-
wise specified, the descriptions and
the illustrated displays refer to the
COMAND control unit. Operation of the cellular phone and
voice control system* are explained in
separate operation guides.

88 Telephone*Telephone operationThe unlock code protects the telephone
against unauthorized use. The unlock code
can be activated on the telephone
( Telephone Operation Guide).
Commit your unlock code to memory.

The telephone functions are available only
after entering the unlock code.
Example: unlock code 2307
In sequence, press the number
keys

, 
,"
and

.
In case of erroneous entry, delete the
last or more digits:
Press the
Delete
soft key as often
as required.

After entering all digits, press

or the
OK soft key.All telephone functions are available if
the correct number has been entered.After registering, Information referring
to the telephone signal appears at the
right end of the status bar.The unlock code has to be entered
again if the entry was incorrect.
When COMAND is switched ON, switching
to telephone mode from any other opera
-
tion mode is made as follows.On the COMAND control unit 
Press

.
The Telephone main menu opens ( page
89)
.
On the multifunction steering wheel
See
( page
25)
Entering the unlock code iThe system switches back to last mode
if the unlock code is not entered within
8 seconds after you are prompted to do
so.
Switching to telephone mode

91 Telephone*
Telephone operation
On the multifunction steering wheel 
Press
s
.
In both cases the call is active. Commu
-
nication is conducted via the hands-free
system. The call volume can be adjusted ( page
29).

For other user functions, see

“Active call”
( page
95)
.
Ending or refusing a call On the COMAND control unit
Press
/
.
On the multifunction steering wheel
Press
t
.
The desired phone number has to be en
-
tered when placing an outgoing call. The following options are available: 
entering a phone number directly ( page
91)

initiating redial
( page
92)

selecting an entry in the accepted and
missed calls list
( page
93)

selecting an entry in the dialed calls list ( page
94)

using speed dial
( page
95)

opening the phone book and selecting
an entry
( page
98)
Entering a phone number 
Open the Telephone main menu ( page
89)
.

Use
"
- !
to enter the phone num
-
ber.In case of erroneous entry, you can de
-
lete the last or more digits.
Press the
Delete
soft key as often
as required.
or
Press
/
on the COMAND con
-
trol unit or
t on the multifunc
-
tion steering wheel.This deletes the entire entry.

After entering the phone number,
press
0
.
The telephone dials the entered num
-
ber. The call is activated the moment
the other party answers the call. Com
-
munication is conducted via the hands-
free system. The volume can be adjust
-
ed (
 page
29).

For other user functions, see

“Active call”
( page
95)
.
iIt is also possible to accept, refuse or
end a call from the cellular phone

( Telephone Operation Guide).
Placing an outgoing call

92 Telephone*Telephone operationInitiating redial On the COMAND control unitImmediate re-dialing of the number dialed
last can be initiated:
Press
0
in the Telephone main
menu twice.
The telephone establishes the connec
-
tion with the number dialed last.
On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Telephone
main display
( page
25)
.

Press
s twice.
The telephone establishes the connec
-
tion with the number dialed last.
In both cases the telephone initiates the
call. The call is activated the moment the
other party answers the call. Communica
-
tion is conducted via the hands-free sys
-
tem. The volume can be adjusted ( page
29).

For other user functions, see

“Active call”
( page
95)
.
After switching to telephone operation,
COMAND can display the number of
missed calls in the status bar.
COMAND automatically creates a list of
accepted and missed calls. This list can
contain 10 entries max. The accepted and missed calls list can be
opened, an entry can be selected, and the
call can be returned.
iWhen pressing
s only once, the di
-
aled calls list appears in the multifunc
-
tion display
( page
94)
.
Accepted and missed calls

94 Telephone*Telephone operationSelecting an entry from the list of di
-
aled calls COMAND automatically creates a list of di
-
aled calls. This list can contain 10 entries
max. The list is sorted chronologically, the
last dialed call is displayed at the top of the
list. On the COMAND control unitOpening the list: 
Press the
Dialed
# soft key in the Tele
-
phone main menu
( page
89)
.
The list appears.
Switching between number and names: 
Press the
123
soft key.
This switches the list to number dis
-
play.If a name in the phonebook is stored
with the number of the highlighted call
it is shown in the status bar.

Press the
ABC
soft key.
This switches the list to name display.

The number in the phone book that be
-
longs to the highlighted name is shown
in the status bar.
Selecting a list entry and establishing the
connection: 
Use

or

to select the desired
entry.

Press
0
.
The telephone initiates the call to the
selected number.
On the multifunction steering wheel Opening the list: 
Switch the multifunction display in the
instrument cluster to the Telephone
main display
( page
25)
.

Press
s once.
The last dialed call is displayed on the
multifunction display.
Dialed callsiIf no calls have been placed yet the Dialed
# soft is shaded out and with
-
out function.
iIf you press
s twice, the telephone
will immediately establish a connection
with the phone number dialed last.

95 Telephone*
Telephone operation
Selecting a list entry and establishing the
connection: 
Press
j or k repeatedly until
the desired entry is shown on the mul
-
tifunction display.

Press
s
.
The telephone initiates the call to the
selected number.
On the cellular phone, telephone numbers
can be stored in a speed dial memory
( Telephone Operation Guide).

You can retrieve the entries of the speed
dial memory via COMAND.
Open the Telephone main menu ( page
89)
.

Press a number key between
3
and
!
and hold it for more than approx.

2 seconds.The telephone establishes the connec
-
tion with the stored number.
The call is activated the moment the other
party answers the call. The call display ap
-
pears. The duration of the call is displayed
in the status bar.On the multifunction steering wheel a call
screen is displayed if the multifunction dis
-
play in the instrument cluster is switched
to Telephone main display
( page
26)
.
The following functions are available dur
-
ing a call:
Ending the active call
( page
95)

Switching the hands-free microphone
ON/OFF
( page
96)

Transmitting number sequences ( page
96)
Ending the active call On the COMAND control unit
Press
/
.
Speed dial
Active call

96 Telephone*Telephone operationOn the multifunction steering wheel
Press
t
.
Switching the hands-free microphone
ON/OFF The soft key
Mic
Off
shows the status of
the microphone.
Microphone OFF: soft key = Microphone ON: soft key = 
Press the
Mic
Off
soft key.
This switches the microphone OFF or
ON. The display of the soft key changes
accordingly.

The other party cannot hear you if the
microphone is switched OFF; however,
you can hear the other party.
Transmitting number sequences Answering machines or other devices
could possibly be controlled through num
-
ber sequences (e.g. remote query func
-
tions). 
With an open connection, press one of
the appropriate number keys
"
- !

for each digit.
You can also transmit the
characters
2
and
$
(#).
The phone book contains all entries of the
cellular phone memory.
iIf a GSM phone is used, the phone book
contains all entries of the telephone
phone book.

97 Telephone*
Phone book


Phone book
On the COMAND control unit
Press the
soft key in the Telephone
main menu
( page
89)
.
The Phone Book menu appears on the
display. The first list entry is highlighted
automatically.
On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the Telephone
main display
( page
26)
.

Press
j or k.
A phone book entry appears on the
multifunction display; scroll up or down
as required.
Phone Book menu An example for the Phone Book menu is
shown above. It shows a list of the phone
book entries whose names start with the
letter
B. Displayed in the status bar is the
number of the highlighted name, in this ex
-
ample
18005551212
.
The following options are now available:
Switching between number and
name
( page
98)
.

Selecting a phone book entry and est
-
sablishing a connection
( page
98)
.
Opening the phone bookiIf no numbers are stored in the phone
book, the soft key
is shaded out
and without function.
iVarious icons may be assigned to the
phone numbers, depending on the en
-
try made on the telephone:
Home number

Work number

Fax number

Main number

Mobile number

Pager number
In the instrument cluster the name of
the category assigned to the phone
number, e.g.
Home
, appears in the multi
-
function display.