2008 MERCEDES-BENZ CLK63AMG high beam

133 Controls in detail
Lighting
Combination switch
Combination switch
1High beam
2High beam flasherHigh beam
Turn the exterior lamp switch to
positionB (
page 129).
Push the combination switch in
direction of arrow1 to switch on the
high beam.
The high beam headlamp indicator
lampA in the instrument cluster
comes on (
page 28).
Pull the combination switch in direction
of arrow2 to its original position to
switch off the high beam.
The high beam headlamp indicator
lampA in the instrument cluster
goes out.
High beam flasher
Pull the combination switch briefly in
the direction of arrow2.Corner-illuminating front fog lamps*
(With Bi-Xenon* headlamps only)
The corner-illuminating front fog lamps
improve illumination of the area in the
direction into which you are turning.
The corner-illuminating front fog lamps will
operate with the engine running and with

the exterior lamp switch in
positionB (
page 129)
or

the exterior lamp switch in
positionU (
page 129)
or

the daytime running lamp mode
activated (
page 131)
iThe corner-illuminating front fog lamps will
only come on in low ambient lighting conditions.
iIf you are driving faster than 25 mph
(40 km/h) or have the front fog lamps switched
on, the corner-illuminating front fog lamps
function is not available.

393 Practical hints
What to do if …?
On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may
appear in the display.
High priority messages appear in red color.
For your convenience the messages are
divided into two sections:

Text messages (page 394)

Symbol messages (page 403)
Warning!G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warn-
ing/indicator lamps, malfunction/warning
messages or the failure of any systems.
Driving characteristics may be impaired.
If you must continue to drive, please do so
with added caution. Visit an authorized
Mercedes-Benz Center as soon as possible.
iSwitching on the ignition causes all
instrument cluster lamps (except low beam
headlamp indicator lamp, high beam headlamp
indicator lamp, and turn signal indicator lamps
unless activated) as well as the multifunction dis-
play to come on. Make sure the lamps and the
multifunction display are in working order before
starting your journey.

412 Practical hints
What to do if …?
Display symbolDisplay messagePossible cause/consequencePossible solution
. Brake Lamp
LeftThe left brake lamp is malfunctioning.Replace the bulb as soon as possible
(
page 448).
Brake Lamp
RightThe right brake lamp is malfunctioning.Replace the bulb as soon as possible
(
page 448).
Front Foglamp
LeftThe left front fog lamp is malfunctioning.Contact an authorized Mercedes-Benz
Center as soon as possible.
Front Foglamp
RightThe right front fog lamp is malfunctioning.Contact an authorized Mercedes-Benz
Center as soon as possible.
Front Left
Parking LampThe left front parking lamp is
malfunctioning. Replace the bulb as soon as possible
(
page 447).
Front Right
Parking Lamp
The right front parking lamp is
malfunctioning.Replace the bulb as soon as possible
(
page 447).
Front Left
Turn SignalThe left front turn signal lamp is malfunc-
tioning.Replace the bulb as soon as possible
(
page 447).
Front Right
Turn SignalT h e r i g h t f r o n t t u r n s i g n a l l a m p i s m a l f u n c-
tioning.Replace the bulb as soon as possible
(
page 447).
High Beam
LeftThe left high beam lamp is malfunction-
ing.Replace the bulb as soon as possible
(
page 446).
High Beam
RightThe right high beam lamp is malfunction-
ing.Replace the bulb as soon as possible
(
page 446).

444 Practical hints
Replacing bulbs
Bulbs Front lamps Rear lamps
LampType
1Additional turn signal
lampLED
2Turn signal lamp1156 NA
3Halogen headlamp:
Low beam
Bi-Xenon* headlamp:
Low and high beam
1
1V e h i c le s w i t h B i- X e n on h e a dl a m p s * d o no t r e p l ac e
the Bi-Xenon bulbs yourself.
H7 (55 W)
D2S-35 W
4Halogen headlamp:
High beam/high beam
flasher
Bi-Xenon* headlamp:
High beam flasher
H7 (55 W)
H7 (55 W)
Parking and standing
lampW 5 W
5Front fog lamp
Corner-illuminating
front fog lamp*H11 (55 W)
H11 (55 W)
6Side marker lampW 5 W
LampType
7High mounted brake
lampLED
8Brake lampP 21 W
9Turn signal lampPY 21 W
aTail, parking and stand-
ing lamp, side marker
lampP 21/5 W
bBackup lampP 21 W
cLicense plate lampsC 5 W
dRear fog lamp (driver’s
side only) and tail lampP 21/4 W

446 Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
Turn the exterior lamp switch to
positionM (
page 129).
Open the hood (page 323).
Front lamps halogen-type
1Housing cover for low beam headlamp
2Housing cover for high beam head-
lamp, parking and standing lamp3Bulb socket for turn signal lamp bulb
4Bulb holder of low beam bulb
5Bulb holder of high beam bulb
6Bulb socket for parking and standing
lamp bulb
Low beam bulb
Turn housing cover1 counterclock-
wise and remove it.
Turn bulb holder4 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder4.
Insert the new bulb so that its socket
locates in the recess of bulb holder4
and is level to it.
Reinsert bulb holder4 with the bulb in
the lamp and turn clockwise.
Align housing cover1 and turn it
clockwise.
High beam bulb
Turn housing cover2 counterclock-
wise and remove it.
Turn bulb holder5 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder5.
Insert the new bulb so that its socket
locates in the recess of bulb holder5
and is level to it.
Reinsert bulb holder5 with the bulb in
the lamp and turn clockwise.
Align housing cover2 and turn it
clockwise.

447 Practical hints
Replacing bulbs
Front turn signal lamp bulb
Turn bulb socket3 counterclockwise
and remove it.
Press gently onto the bulb and turn
counterclockwise out of bulb
socket3.
Press the new bulb gently into bulb
socket3 and turn clockwise until it
engages.
Place bulb socket3 back into the
lamp and turn it clockwise.
Parking and standing lamp bulb
Turn housing cover2 counterclock-
wise and remove it.
Pull out bulb socket6 with the bulb.
Pull the bulb out of the bulb socket6.
Press the new bulb into bulb socket6.
Press bulb socket6 back into the
lamp.
Align housing cover2 and turn it
clockwise.Front lamps Bi-Xenon*-type
1Bulb socket for turn signal lamp
2Housing cover for high beam flasher,
parking and standing lamp
3Housing cover for Bi-Xenon* headlamp4Bulb holder for high beam flasher bulb
5Bulb socket for parking and standing
lamp bulb
High beam bulb for high beam flasher
Turn housing cover2 counterclock-
wise and remove it.
Turn bulb holder4 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder4.
Insert the new bulb so that its socket
locates in the recess of bulb holder4
and is level to it.
Warning!G
Do not remove the cover 3 for the
Bi-Xenon* headlamp. Because of high
voltage in Xenon lamps, it is dangerous to
replace the bulb or repair the lamp and its
components. We recommend that you have
such work done by a qualified technician.


504 Index
G
Garage door opener 33, 301
Gasoline see Fuel
GAWR 358
Gear range
Automatic transmission 177
Limiting 177
Shifting into optimal 180, 182
Gear selector lever 51, 172
Cleaning 375
Gearshift pattern 172
Lock 52
Message in display 400
Position 173, 174
Position indicator 29, 141
Shifting procedure 173
Unlocking in an emergency 429
Gear selector lever one-touch gearshifting
Automatic transmission 179
Global locking/unlocking
see Key, SmartKey or KEYLESS-GO*
Glove box 285
Gloves 422
Good visibility 185
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWRGross Vehicle Weight see GVW
GVW 358
GVWR 359
H
Halogen headlamp see Headlamps
Hands-free microphone 33
Hard plastic trim items, cleaning 375
Hazard warning flasher 135
Head restraints 43, 120
Active head restraints 81
Front seat 120
Power seat, Adjusting 43
Rear seat 120, 123
Rear seat, Folding back 121
Rear seat, Lowering 123
Rear seat, Placing upright 122
Rear seat, Raising 123
Rear seat, Removing/installing 122
Headlamp
cleaning system* 185, 330, 496
Headlamp delayed shut-off see
Delayed shut-off, Exterior lampsHeadlamps
Automatic headlamp mode 130
Cleaning lenses 372
Daytime running lamp mode 131
Halogen 446
High beam see High beam flasher
High beam see High beam headlamps
Light sensor 411
Locator lighting 132
Low beam headlamps 130
Low beam see Low beam headlamps
Manual headlamp mode 130
Messages in display 411–415
Night security illumination 132
Replacing bulbs 444, 446
Switch 55, 129
Headliner and shelf below rear window,
Cleaning and care of 375
Head-thorax air bag 71
Heated seats* 125
High beam flasher 55, 133
Replacing bulbs (Bi-Xenon*) 444
Replacing bulbs (Halogen) 444

505 Index
High beam headlamps 133
Indicator lamp 29
Messages in display 412
Replacing bulbs (Bi-Xenon*) 444
Replacing bulbs (Halogen) 444, 446
Replacing bulbs for
high beam flasher (Bi-Xenon*) 447
Switching on 55
High mounted brake lamp 444
Hood 323
Horn 27
HVAC see Climate control system
Hydroplaning 314I
Identification labels 478
Identification number,
Vehicle (VIN) 478, 479
Ignition
with KEYLESS-GO* 40
with SmartKey 38
Immobilizer 97
Indicator lamps see
Lamps, indicator and warning
Infant and child restraint systems see
Children in the vehicle
Inflation pressure see
Tires, Inflation pressure
Inside door handle 34, 109
Instrument cluster 28, 138
Illumination brightness 138
Lamps in 378–387
Messages in display see
Multifunction display messages
Multifunction display 141
Instrument lighting see Instrument
cluster, Illumination brightness
Instrument panel see Instrument cluster
Instruments and controls see CockpitInterior lighting 136
Delayed shut-off 165
Interior rear view mirror 47, 186
Antiglare position 185
Auto-dimming 186
Interior storage spaces see
Storage compartments
J
Jack 422
Jacking up the vehicle 459
Jump starting 467