2008 MERCEDES-BENZ CLK350 brake pads

310 Operation
Driving instructions
Power assistance
Brakes
To help prevent brake disk corrosion after
driving on wet road surfaces (particularly
salted roads), it is advisable to brake the
vehicle with considerable force prior to
parking. The heat generated serves to dry
the brakes.If your brake system is normally only sub-
ject to moderate loads, you should occa-
sionally test the effectiveness of the
brakes by applying above-normal braking
pressure at higher speeds. This will also
enhance the grip of the brake pads.
Refer to the description of the Brake Assist
System (BAS) (
page 92).
Brake pad wear or a leak in the system may
be the reason for low brake fluid level in
the reservoir.
The brake fluid level in the reservoir may
be too low if the brake warning lamp in the
instrument cluster comes on and an
acoustic warning sounds although the
parking brake is released (
page 380).
Warning!G
With the engine not running, there is no
power assistance for the brake and steering
systems. In this case, it is important to keep
in mind that a considerably higher degree of
effort is necessary to brake and steer the ve-
hicle.
Warning!G
After driving in heavy rain for some time
without applying the brakes or through wa-
ter deep enough to wet brake components,
the first braking action may be somewhat
reduced and increased pedal pressure may
be necessary to obtain expected braking ef-
fect. Maintain a safe distance from vehicles
in front.
Resting your foot on the brake pedal will
cause excessive and premature wear of the
brake pads.
It can also result in the brakes overheating,
thereby significantly reducing their effec-
tiveness. It may not be possible to stop the
vehicle in sufficient time to avoid an acci-
dent.
!Because the ESP® operates automatically,
the engine must be shut off (SmartKey in starter
switch position0 or1 or KEYLESS-GO
start/stop button* in position0 or1) when

the parking brake is being tested on a brake
test dynamometer

the vehicle is being towed with the front axle
raised
Active braking action through the ESP
® may oth-
erwise seriously damage the brake system.
Warning!G
Make sure not to endanger any other road
users when carrying out these braking
maneuvers.

311 Operation
Driving instructions
Observe additional messages in the multi-
function display that may appear
(
page 404).
Have the brake system inspected
immediately. Contact an authorized
Mercedes-Benz Center.
All checks and service work on the brake
system should be carried out by qualified
technicians only. Contact an authorized
Mercedes-Benz Center.
Only install brake pads and brake fluid rec-
ommended by Mercedes-Benz.
After hard braking, it is advisable to drive
on for some time, rather than immediately
park, so that the air stream can cool down
the brakes faster.High-performance brake system
(CLK 63 AMG only)
The high-performance brake system is
designed to operate under the extremely
high operating demands required to
accommodate the performance capabili-
ties of the vehicle. The brakes may
produce a squeaking-type noise depending
on the

vehicle speed

brake force applied

ambient conditions, e.g. temperature
and humidity
As with any brake system, the wear of indi-
vidual brake system components such as
brake pads or discs strongly depends on
your driving style and the conditions under
which you operate the vehicle. Thus, a driv-
ing style calling for high demand braking
will cause your vehicle’s brakes to wear
more quickly.
Warning!G
If other than recommended brake pads are
installed, or other than recommended brake
fluid is used, the braking properties of the
vehicle can be degraded to an extent that
safe braking is substantially impaired. This
could result in an accident.
!When driving down long and steep grades,
relieve the load on the brakes by shifting into a
lower gear to use the engine’s braking power.
This helps prevent overheating of the brakes and
reduces brake pad wear.

312 Operation
Driving instructions
Driving off
Apply the brakes to test them briefly after
driving off. Perform this procedure only
when the road is clear of other traffic.
Warm up the engine gradually. Do not
place full load on the engine until the oper-
ating temperature has been reached.Parking
Warning!G
New vehicle brake pads and discs, and
replacement brake pads and discs may take
several hundred miles of driving until they
provide optimum braking efficiency. Until
that time, you may need to use increased
brake pedal pressure while braking. Please
be aware of this and adjust your driving and
braking accordingly during this break-in
period.
Excessive high demand braking will cause
correspondingly high brake wear. Please be
attentive to the brake warning lamp in the
instrument cluster and brake condition mes-
sages in the multifunction display.
Especially for high performance driving, it is
important to maintain and have the brake
system checked regularly.
!When driving off on a slippery surface, do
not allow a drive wheel to spin for an extended
period with the ESP
® switched off. Doing so may
cause serious damage to the drivetrain which is
not covered by the Mercedes-Benz Limited
Warranty.
!Simultaneously depressing the accelerator
pedal and applying the brakes reduces engine
performance and causes premature brake wear
and drivetrain wear.
Warning!G
Do not park this vehicle in areas where com-
bustible materials such as grass, hay or
leaves can come into contact with the hot
exhaust system, as these materials could be
ignited and cause a vehicle fire.
To reduce the risk of personal injury, or
damage to the vehicle or the vehicle
drivetrain, as a result of vehicle movement,
always do the following before turning off
the engine and leaving the vehicle:

Keep right foot firmly on brake pedal.

Firmly depress parking brake pedal.

Move the gear selector lever to
positionP.

Slowly release brake pedal.

When parked on an incline, always turn
the front wheels towards the road curb.

374 Operation
Vehicle care
Chrome-plated exhaust tip*
Regular cleaning and care of chrome-plat-
ed exhaust tips will help to maintain their
shine and the classy appearance.
Use Mercedes-Benz approved Chrome
Polishing Paste each time the vehicle
has been washed, especially during the
winter.Light alloy wheels
If possible, clean wheels once a week.
Use Mercedes-Benz approved Wheel
Care, a soft bristle brush and a strong
spray of water for cleaning the light
alloy wheels.Plastic and rubber parts
Use a gentle dishwashing detergent or
mild detergent for delicate fabrics as a
washing solution.
Wipe with a cloth moistened in a
lukewarm solution.
The surface may temporarily change
color. If this is the case, wait for it to
dry.
!Do not use alkaline cleaners such as wheel
cleaners as they could cause corrosion.
!Only use acid-free cleaning materials. Acid
may cause corrosion or damage the clear coat.
!The vehicle should not be parked for an
extended period of time immediately after it has
been cleaned, especially not after the wheel rims
have been cleaned with wheel rim cleaner.
Wheel rim cleaners can lead to increased
corrosion of the brake disks and brake pads.
Non-approved wheel cleaners may also damage
the wheel paint if the car is not driven after
cleaning. Therefore, the vehicle’s brake system
should always be warmed-up before it is parked
after cleaning. To do so, please drive your vehicle
for several minutes to allow the brakes to dry.
When applying Mercedes-Benz approved Tire
Care and Mercedes-Benz approved Wheel Care
products, take care not to spray them on the
brake disks.
Warning!G
Do not use cleaners or cockpit care sprays
containing solvents to clean the cockpit or
the steering wheel. Cleaners containing sol-
vents will make the surface porous and vehi-
cle occupants could suffer serious injuries
from plastic parts coming loose in the event
of air bag deployment.

404 Practical hints
What to do if …?
Display symbolDisplay messagePossible cause/consequencePossible solution
2Brake WearThe brake pads have reached their
wear limit.Have the brake pads replaced as soon as
possible.
;(USA only)
!(Canada only)
Release
Parking BrakeYou are driving with the parking brake
set.Release the parking brake (page 53).
;(USA only)
3 (Canada only)
Check
Brake Fluid
LevelThere is insufficient brake fluid in the
reservoir.Risk of accident! Stop the vehicle in a safe
location or as soon as it is safe to do so
and notify an authorized Mercedes-Benz
Center. Do not add brake fluid! This will
not solve the problem.
Warning!G
Driving with the message Check Brake
Fluid Level
displayed can result in an ac-
cident. Have your brake system checked im-
mediately. Do not add brake fluid before
checking the brake system. Overfilling the
brake fluid reservoir can result in spilling
brake fluid on hot engine parts and the
brake fluid catching fire. You could be seri-
ously burned.
!If you find that the brake fluid in the brake
fluid reservoir has fallen to the minimum mark or
below, have the brake system checked for brake
pad thickness and leaks.!Brake pad thickness must be visually
checked by a qualified technician at the intervals
specified in the Maintenance Booklet.

498 Index
Automatic lighting control,
Interior lighting 136
Automatic locking when driving 118
Automatic shift program 178
Automatic transmission
Accelerator position 176
Automatic shift program 178
Emergency operation
(limp-home mode) 184
Gear ranges 177
Gear selector lever 51, 172
Gear selector lever control
one-touch gearshifting 179
Gear selector lever positions 174
Gear shifting malfunctions 184
Kickdown 176
Kickdown, manual shift program 184
Manual shift program
CLK 63 AMG 182
Program mode selector switch 178
Shifting procedure 173
Starting engine 51
Steering wheel gearshift control
one-touch gearshifting* 180
Transmission fluid level 327
Automatic Transmission Fluid see ATFB
Backrest 281
Seat, Multicontour* 124
Seat, Power 42
Backup lamps
Messages in display 414
Replacing bulbs 443, 444
Bar 358
BAS 92
Batteries, SmartKey
Changing 442
Checking battery condition 108
Battery, Vehicle 329, 464
Charging 466
Connecting 466
Disconnecting 465
Installing 466
Jump starting 467
Messages in display 403
Removing 465
Bead 358
Beverage holder see Cup holder
Block heater (Canada only) 363
Bolts, Spare wheel 426Brake fluid 491
Checking 322
Message in display 404
Brake lamp
Cleaning lenses 372
High mounted 444
Replacing bulbs 444, 448
Brake pads
Message in display 404
Brakes 310
High-performance brake system
(CLK 63 AMG only) 311
Warning lamp 380
Break-in period 308
Bulbs, replacing see Replacing bulbs

508 Index
Mirrors
Adjusting 47
Antiglare position 185
Auto-dimming 186
Exterior rear view mirrors 47
Interior rear view mirror 47
Mobile phone see Telephone*
MOE tires* see MOExtended system*
MOE* see MOExtended system*
MOExtended system* 463
MOExtended tires* 482
MON 321
Motor Octane Number see MON
MP3 230
Multicontour seat* see
Seats, Multicontour*
Multifunction display 141
Changing settings see
Control system menus and
Control system submenus
Selecting language 158
Symbol messages 403–420
Text messages 394–401Multifunction display messages 392
ABS 394
Battery 403
Brake fluid 404
Brake pads 404
Check engine 405
Coolant 405–407
Engine 405
Engine coolant 405–407
ESP
®394
Fog lamps 412
Front passenger
front air bag 396–399
Fuel cap 408
Gear selector lever 400
Headlamps 411–415
Key, SmartKey 411
KEYLESS-GO* 410
Lamps 413
Lamps, exterior 411–415
License plate lamp 413
Light sensor 411
Low tire pressure 419
Parking brake 404
Parking lamps 412
Roll bars 417Soft top 420
SRS 416
Steering gear oil 417
Tele Aid 418
Telephone* 418
Turn signals 412
Windshield washer fluid 420
Multifunction steering wheel 30, 142
Button operation 142
N
Navigation system* 153
See separate COMAND*
operating instructions
Net, Parcel 286
Neutral gear position,
Automatic transmission 172, 174
New vehicle break-in 308
Night security illumination 132
Normal occupant weight 359
Number, paintwork code 478
Number,
vehicle identification (VIN) 478, 479