2008 MERCEDES-BENZ CL-Class oil

[x] Cancel search: oil

rear entertainment jack points jacking points language brake sensor set clock

Page 740 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 739 Technical data
Fuels, coolants, lubricants, etc.
The coolant solution must be used year
round to provide the necessary corrosion
protection and increase boil-over protec-
tion. Refer to Maintena

739 Technical data
Fuels, coolants, lubricants, etc.
The coolant solution must be used year
round to provide the necessary corrosion
protection and increase boil-over protec-
tion. Refer to Maintenance Booklet for re-
placement interval.
Coolant system design and coolant used
determine the replacement interval. The
replacement interval published in the
Maintenance Booklet is only applicable if
MB 325.0 Anticorrosion/Antifreeze solu-
tion or other Mercedes-Benz approved
products of equal specification are used to
renew the coolant concentration or bring it
back up to the proper level.
For information on other Mercedes-Benz
approved products of equal specification,
refer to the Factory Approved Service
Products pamphlet (USA only) or contact
an authorized Mercedes-Benz Center.To provide important corrosion protection,
the solution must be at least 50% anticor-
rosion/antifreeze (equivalent to freeze
protection to approximately -35°F
[-37°C]). If you use a solution that is more
than 55% anticorrosion/antifreeze (freeze
protection to approximately -49°F
[-45°C]), the engine temperature will in-
crease due to the lower heat transfer capa-
bility of the solution. Therefore, do not use
more than this amount of anticorrosion/
antifreeze.
If the coolant level is low, water and
MB 325.0 Anticorrosion/Antifreeze
should be used to bring it up to the proper
level (have cooling system checked for
signs of leakage).
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult an authorized Mercedes-Benz Center.Anticorrosion/antifreeze
Your vehicle contains a number of alumi-
num parts. The use of aluminum compo-
nents in motor vehicle engines
necessitates that anticorrosion/antifreeze
coolant used in such engines be specifical-
ly formulated to protect the aluminum
parts. Failure to use such anticorrosion/
antifreeze coolant will result in a signifi-
cantly shortened service life.
Therefore, the following product is strongly
recommended for use in your vehicle:
MB 325.0 Anticorrosion/Antifreeze agent.
Before the start of the winter season (or
once a year in hot southern regions), you
should have the anticorrosion/antifreeze
concentration checked. The coolant is also
regularly checked each time you bring your
vehicle to an authorized Mercedes-Benz
Center for service.

Page 750 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 749 Index
Loading (COMAND) 116
Playback options (COMAND) 124
Selecting a medium (COMAND) 122
Selecting a track (COMAND) 122
Setting the audio format
(COMAND) 124
Video (COMAND) 128
E
Easy-entry/exit

Page 751 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 750 IndexETD 56
Safety guidelines 44
Exterior lighting
Delayed switch-off (COMAND) 260
Locator lighting (COMAND) 261
Exterior rear view mirrors
Adjusting 381
Auto-dimming on the driver’s
side 383
F

Page 756 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 755 Index
Messages in display see Multifunction
display messages
Microphone, Hands-free 37
Minispare wheel 683, 696, 730
Mirrors
Activating exterior rear view mirror
parking position 384
Adjusting 3

Page 757 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 756 IndexN
Navigation system
Menu overview (COMAND) 189
Navigation system (COMAND) 183
Basic settings 193
Destination entry 198
Destination memory 247
Detour function (COMAND) 242
Driving maneuver 233

Page: < prev 1-10 ... 9-16 17-24 25-32 33-40

fuse chart apple carplay USB port alarm checking oil manual radio set