2008 MERCEDES-BENZ CL-Class winter tires

[x] Cancel search: winter tires

Page 564 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 563 Operation
Tires and wheels
Tread depth 
Do not allow your tires to wear down too 
far. Adhesion properties on wet roads are 
sharply reduced at tread depths of less 
than 
1/8in (3 mm).
Treadwear

Page 581 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 580 OperationTires and wheels
At the tire manufacturer’s option, any 
tire with a speed capability above 
149 mph (240 km/h) can include a 
“ZR” in the size designation (for exam-
ple: 245/40 Z

Page 591 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 590 OperationWinter drivingBefore the onset of winter, have your 
vehicle winterized at an authorized 
Mercedes-Benz Center. This service 
includes:
Check of anticorrosion and antifreeze 
concentrati

Page 592 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 591 Operation
Winter driving
Snow chainsSnow chains should only be driven on 
snow-covered roads at speeds not to 
exceed 30 mph (50 km/h). Remove chains 
as soon as possible when driving on roads 
wi

Page 597 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 596 OperationVehicle careMore frequent washings are necessary to 
deal with unfavorable conditions:
near the ocean

in industrial areas (smoke, exhaust 
emissions)

during winter operation
You shou

Page 728 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 727 Technical data
Rims and tires
Rims and tires
!
Only use tires which have been tested and 
approved by Mercedes-Benz. Tires approved by 
Mercedes-Benz are developed to provide best 
possible perfo

Page 729 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 728 Technical dataRims and tiresSame size tiresModel
CL 550
CL 600
CL 550 (Sport Package*)
CL 600 (Sport Package*)
CL 63 AMG
CL 63 AMG (Performance Package*)
CL 65 AMG
Rims (light alloy)
8.5 J x18 H2

Page 763 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 762 Index
PIN2 (COMAND) 143
PUK / PUK2 (COMAND) 143
Redialing (COMAND) 150
Redialing (Instrument cluster 
control system) 297
Removing from cradle 521
Single call connection 
(COMAND) 151
Speed dialin
Page:   < prev 1-8 9-16 17-24 next >