2008 MERCEDES-BENZ CL-Class trailer

[x] Cancel search: trailer

Page 464 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 463 Controls in detail
Driving systems
Selecting a normal level
Start the engine.
If indicator lamp2 is on:

Press switch1.
Indicator lamp2 goes out. The vehicle 
is adjusted to a normal level.
Susp

Page 466 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 465 Controls in detail
Driving systems
Front sensors
Rear sensorsMinimum distance
If the system detects an obstacle in this 
range, all the distance warning segments 
illuminate and you hear a warning

Page 468 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 467 Controls in detail
Driving systems

Switching off the Parktronic sys-
tem: Press button 1.
Indicator lamp 2 comes on.

Switching on the Parktronic system: 
Press button 1 again.
Indicator lamp 2

Page 470 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 469 Controls in detail
Driving systems
The Park Assist system deactivates at 
speeds over approximately 10 mph 
(16 km/h). At lower speeds the Parktronic 
system turns on again.
Park Assist is also sw

Page 473 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 472 Controls in detailDriving systemsAdvanced Parking Guidance only shows a 
representation of the parking space in the 
instrument cluster display as parking space 
is first initially measured when d

Page 474 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 473 Controls in detail
Driving systems
Use Advanced Parking Guidance for park-
ing spaces that are
parallel to the direction of travel

located on straight streets, i.e. not in 
curves

on the same

Page 479 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 478 Controls in detailDriving systemsThe Rear View Camera is in the handle 
strip of the trunk lid.
1Rear View CameraView through the camera
i
The image from the Rear View Camera is 
shown mirror-inve

Page 481 of 769

MERCEDES-BENZ CL-Class 2008 C216 Comand Manual 480 Controls in detailDriving systemsSwitching on Rear View Camera
Switch on the ignition (
page 365).

Switch on COMAND (
page 83).

Move gear selector lever to reverse 
gearR.
The COMAND displa
Page:   1-8 9-16 next >