208 Voice Control
Troubleshooting
Troubleshooting
ProblemPossible cause/consequenceSuggested solutions
Voice control does not under-
stand you.You have not operated the system
from the driver’s seat.Only operate the system from the driver’s seat.
Voice control does not under-
stand you.You have spoken too exaggerated-
ly, too loudly or too quietly.State the commands coherently and clearly without exag-
gerating.
Voice control does not under-
stand you.A blower is set to its highest set-
ting or there is wind noise through
an open window.Prevent loud noises from interfering.
An address book entry without
a speaker-dependent voice tag
is not recognized.The fields in the address book en-
try for the last name and first name
are both filled in, but you only said
the first name or the last name.Say the last name and then the first name of the address
book entry in full.
The names entered in the address
book do not sound sufficiently dif-
ferent, or are not pronounced as
they are written.Make sure the address book entries are plausible.
Check the address book entries for the following:
The name entries, e.g. last name and first name, are in the
right fields.
Do not use abbreviations or acronyms.
Avoid unnecessary spaces in names.
Do not use special characters.
209 Voice Control
Troubleshooting
An address book entry without
a speaker-dependent voice tag
is not recognized.The names entered in the address
book do not sound sufficiently dif-
ferent, or are not pronounced as
they are written.Create a speaker-dependent voice tag (page 182).
or
Give the “List address book” command.
The system reads out the address book.
Press the ! button when the name you want is read out.
An address book entry with a
speaker-dependent voice tag is
not recognized.The sound of the voice tags in the
address book is not sufficiently dif-
ferent.The voice tags entered in the address book must sound as
different as possible, e.g. store the names White and Wright
as “Mr White office” and “Mr Wright John”.
or
Give the “List address book” command.
The system reads out the address book.
Press the ! button when the name you want is read out.
A station list entry is not recog-
nized.The voice tags for the stations in
the address book do not sound
sufficiently different.Save a speaker-dependent voice tag for the station
(
page 196).
or
Give the “List station list” command.
The system reads out the station list.
Press the ! button when the station you want is read
out.
The station is selected (
page 196).
ProblemPossible cause/consequenceSuggested solutions
