2008 MERCEDES-BENZ C-Class Comand unit

94 Telephone
COMAND phone book
Displaying details on an entry
COMAND can also fully display an abbrevi-
ated entry.
Select entry.
Select “Options” K “Details”.
The details screen appears.
To close details screen: Slide omp
repeatedly until the entry is highlighted
again.
Select entry (page 93).
Press n.
or
Press thew button on the COMAND
control unit.
If the entry contains subentries, a list
appears.
Select the desired subentry.
Press n again.
or
Press thew button on the
COMAND control unit.
i When a new entry is added through the
COMAND phone book, it is saved to the address
book.
Select “Options” K “New Entry” in the
COMAND phone book.
Select a number category, e. g.
“Home”.
Select a phone category, e. g.
“Mobile Phone”.
Select “Save”.
The input menu with the data fields ap-
pears.
1Cursor
2Data field
3Predictive speller
4Selected phone category
Switching data field
Slide mq until the predictive speller is
not highlighted.
Then slide qmr to select desired field
and press n.
or
Select [ or ] in the speller.
The input menu indicates the selected
data field.
Initiating call to an entry
Creating a new entry

101 Telephone
Making calls
Rejecting or accepting calls
To reject: Select “Reject”.
or
Press W on the COMAND control
unit’s keypad or thet button on
the multifunction steering wheel.
To accept: Select “Accept”.
or
Press w on the COMAND control
unit’s keypad or thes button on
the multifunction steering wheel.
After accepting the call, you will conduct
the conversation over the hands-free sys-
tem. The call volume can be adjusted
(
page 35). Please see the “Functions
during a single call” section for other func-
tions (
page 102).
i You can also accept a call as described
above if COMAND is displaying a screen for an-
other main application. After accepting the call,
the display switches to the phone display. Once
the call is over, the display for the previous main
application will appear again.
Entering phone number via the
COMAND control unit
Open the phone main menu
(
page 92).
Enter all the digits on the numeric key-
pad one after the other.
To delete individual digits:
Briefly press the
ä button.
To delete entire phone numbers:
Press and hold
ä until the number
has been deleted.
To initiate call: Press thew button.
or
Press thes button on the multi-
function steering wheel.
Entering phone number from the
COMAND controller
Open the phone main menu
(
page 92).
To enter digits: Select all the digits
one after the other.
To delete individual digits: Select
õ and briefly press n.or
Press the î button next to the
COMAND controller.
To delete entire phone numbers: Se-
lect õ and press and hold n until
the phone number has been deleted.
or
Press and hold î until the entry has
been deleted.
To initiate call: Select w on the right
in the speller.
Redialing
Open the phone main menu
(
page 92).
Select G.
or
Press thew button on the COMAND
control unit when the phone main
menu is displayed.
The dialed calls list appears. The call di-
aled last will be at the top of the list.
Making calls
Incoming call
Initiating an outgoing call

102 Telephone
Making calls
To select call: Rotate ymz or slide
qmr.
To initiate call: Press n.
Initiating a call to a call list entry or
COMAND phone book entry
Open the call list and select an entry
(
page 97).
or
Open the COMAND phone book and
select an entry (
page 104).
To initiate call: Press n.Phone mode with a single call
1Other party
2Symbol for active phone connection
3Switches the hands-free microphone
off or on
4Sends DTMF tones (not possible with
all mobile phones)
5Device name of the connected mobile
phone
6Terminates callSwitching hands-free microphone on or
off
Open the phone main menu
(
page 92).
To switch off: Select “Mic Off”.
When the microphone is switched off
the symbol > appears in the main ar-
ea.
To switch on: Select “Mic On”.
The symbol > disappears
Sending DTMF tones
i This function is not possible with all mobile
phones.
Answering machines or other devices can
be controlled via DTMF tones, e. g. for re-
mote query functions.
To transmit individual characters:
During a call select the required char-
acters using the COMAND controller.
or
Press the corresponding button on the
COMAND control unit keypad.
Every selected character is transmitted
immediately.
Functions during a single call

103 Telephone
Making calls
Transmitting phone book entry as a
sequence of characters: Select
“Name”.
Select the desired phone book entry.
The entry is transmitted immediately as
a sequence of characters.
To switch back to call display: Select
“Back”.
Ending an active call
Switch display to phone mode if neces-
sary (
page 92).
To terminate call: Select 4.
or
Press W on the COMAND control unit
or thet button on the multifunc-
tion steering wheel.
Call waiting
i The call waiting function must be supported
and activated by the phone provider.
If you are conducting a single call and you
receive another, the second call number is
entered into the received calls list and a
signal tone will sound.
You can accept the waiting call with the
mobile phone. The previous call is put on
hold. You then have two calls, the accept-
ed call is the active call.

116 Navigation
Introduction

COMAND does not issue any naviga-
tion announcements.

The message “Off Mapped Road” and a
direction arrow are displayed instead
of the route guidance displays. The ar-
row indicates the direction of the desti-
nation.
i Direction arrow accuracy is also dependant
on correct vehicle position and/or direction.
Once the position finding operation has
been completed, route guidance takes
place again via navigation announcements
and route guidance displays.
Interrupting journey during route guid-
ance
i An interruption in the journey means parking
the vehicle and switching off COMAND.
The continuation of the journey means switching
COMAND on again and continuing to drive.
If you interrupt the journey during route
guidance and continue it later, the follow-
ing applies:

If you continue the journey within
2 hours, COMAND automatically con-
tinues route guidance.

If you continue the journey after
2 hours, route guidance is cancelled.
You will have to continue the cancelled
route guidance again manually
(
page 154).
Hard disk drive
COMAND has an integrated hard drive on
which the map software is stored.
If an area of the hard drive has a fault,
COMAND can no longer access the map
data in that area for the route calculation,
for example.
The message “Navigation Unavailable” will
then be displayed.
To delete message: Switch COMAND
off and back on again.
i After switching on/off, the navigation sys-
tem will remain functional until it has to access
the faulty area of the hard drive again. The mes-
sage will be displayed again.
Contact a Mercedes-Benz service center.
Measurement units
The measurement units displayed in navi-
gation mode are identical to those set in
the instrument cluster.There is an input restriction for vehicles for
certain countries.
The restriction is active for vehicle speeds
above apprx. 3 mph. The restriction is de-
activated as soon as the speed falls below
apprx. 2 mph.
Certain entries cannot be made when the
restriction is active, e. g. a city or road en-
try.
This is indicated by the fact that certain
menu items cannot be selected.
Input restriction

213 Technical terminology
AAC
(A
dvanced Audio Coding)
A means of compressing audio data
which is subject to losses. Based on
the MPEG2 standard.
Bit
(Bi
nary digit)
The smallest unit of digital information.
Bit rate
Measurement of transmission speed.
Indicates the number of ->bits trans-
mitted per unit time.
Bluetooth
®
Wireless personal area networks that
provide a way to connect and exchange
information between devices such as
mobile phones, laptops, PCs, etc. over
a short-range radio frequency.
CD
(C
ompact Disc)
Digital storage medium in disc format.
CD-R
(CD
Recordable)
Writeable ->CD-ROM.
CD-RW
(CD
Rewriteable)
CD which can be read, written and de-
leted.CD text
CD text is an extension of an audio CD,
which contains text information such
as title, artist and name of the individu-
al pieces of music.
->COMAND displays
this information on the corresponding
screens if the selected audio CD con-
tains this information.
COMAND control system
(Co
ckpit Management and Data
System)
Central information and operating unit
for various vehicle functions, such as
radio, DVD changer and other equip-
ment, such as telephone, navigation
system.
Dolby Digital
Optional format for audio data on an
DVD audio or DVD video.
DTMF
(D
ual Tone Multi-Frequency)
DTMF tones control answering machi-
nes or other devices, e. g. for remote
queries.
DTS
(D
igital Theater Sound)
Optional format for audio data on an
DVD audio or DVD video.DVD
(D
igital Versatile Disc)
Digital storage medium in disc format
for storing large data volumes, e.g.
films.
DVD+R
(DVD
Recordable)
->DVD which can be read and written
but not deleted.
DVD+RW
(DVD
Rewriteable)
->DVD which can be read, written and
deleted.
DVD-R
(DVD
Recordable)
->DVD which can be read and written
but not deleted.
DVD-RW
(DVD
Rewriteable)
->DVD which can be read, written and
deleted.
Geo-coordinates
Indicate the geographical position of a
location on the earth's surface.