2008 MAZDA MODEL TRIBUTE lock

[x] Cancel search: lock

Page 1 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) Introduction 4 
Instrument Cluster 12
Warning lights and chimes 12 
Gauges 17
Entertainment Systems 19
Auxiliary input jack 25
Climate Controls 29
Manual heating and air conditioning 29
Rear window de

Page 8 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) These are some of the symbols you may see on your vehicle. Vehicle Symbol Glossary 
Safety Alert
See Owner’s Manual
Protecting the 
EnvironmentFasten Seat Belt
Airbag - FrontAirbag - Side
Passenger

Page 9 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) Vehicle Symbol Glossary 
Rear Window 
Defrost/Demist
Power Windows
Power Window LockoutPersonal Alarm System
Feature
Engine OilEngine Coolant
Engine Coolant
TemperatureDo Not Open When Hot
BatteryAvoi

Page 14 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) Anti-lock brake system (ABS):If 
the ABS light stays illuminated or
continues to flash, a malfunction has
been detected, have the system
serviced immediately by an
authorized Mazda dealer. Normal brak

Page 16 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) Anti-theft system:Flashes when 
the SecuriLock  Passive Anti-theft 
System has been activated. 
Throttle control/Powertrain: 
Illuminates when a powertrain fault
has been detected. Contact your
autho

Page 20 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) the system will reload the disc. 
To auto eject all loaded discs, press and hold EJECT. The system 
will eject all discs and prompt you when to remove them. 
2.  MEMORY PRESETS:In radio 
mode,  to set

Page 31 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) For maximum cooling performance in MAX A/C mode: 1. Select MAX A/C.
2. Move temperature control selector to the coolest setting.
3. Set the fan to the highest speed initially, then adjust to maintain

Page 35 of 288

MAZDA MODEL TRIBUTE 2008  Owners Manual (in English) 5. Locate the vertical adjuster on the headlamp, then us  ea4mm 
socket to turn the adjuster
either counterclockwise (to
adjust up) or clockwise (to
adjust down) aligning the upper
edge of the light p
Page:   1-8 9-16 17-24 25-32 33-40 ... 72 next >