Page 106 of 400
Black plate (106,1)
5. Remove the seat belts from the beltguides.
Belt guide
6. Slide the seats forward.
Refer to Seat Slide on page 2-2.
7. Fold the seatbacks forward. Refer to Seat Recline on page 2-2.
8. Pull the levers and fully release the side latches.
Side latch
Lever
9. After the side latches are fully released,
release the lever. 10. Lift the side latches while pulling the
lever. Make sure the hooks are fully
released.
Side
latch
Lever Hook
11. Disconnect the rear window defroster
cord connector from the plug on the
inside of the hardtop.
3-46
Knowing Your Mazda
Doors and Locks
MX-5_8X49-EA-07F_Edition5 Page106
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F
Page 108 of 400
Black plate (108,1)
16. Connect the convertible top's rearwindow defroster coupler (C) to the
coupler (B).
(C)
(B)
qInstalling the Detachable Hardtop
CAUTION
Do not attempt to install the hardtop
with the convertible top also up.
Lower the convertible top before
installing the hardtop, otherwise
damage will occur to the convertible
top.
NOTE
lBe sure to place the convertible top latches
in the locked position.
lConfirm that the rear window defroster
coupler is disconnected. Also make sure the
convertible top is completely lowered
before installing the hardtop.
1. Park the vehicle on a level surface and firmly set the parking brake.
2. Lower the side windows, then turn off the ignition.
3. Remove the antenna if it is installed. Refer to Antenna on page 6-9. 4. Remove the seat belts from the belt
guides.
Belt guide
5. Slide the seats forward.
Refer to Seat Slide on page 2-2.
6. Fold the seatbacks forward. Refer to Seat Recline on page 2-2.
7. Connect the rear window defroster coupler.
3-48
Knowing Your Mazda
Doors and Locks
MX-5_8X49-EA-07F_Edition5 Page108
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F
Page 110 of 400
Black plate (110,1)
CAUTION
ØBe careful not to strike the body
with any of the protruding
hardtop latches.
Ø The rear defogger grid and the
defogger cord could be damaged
when removing or installing the
hardtop. Make sure the rear
defogger grid isn't folded and the
defogger cord isn't caught
between the vehicle's body and the
hardtop.
11. Make sure the striker for the top latch is securely engaged with the anchor
before pushing the top latch lever.
Rotate the lever of the top latch with
the palm of your hand until the top
latch is locked.
Striker
Anchor
12. Pull the levers and fully release theside latches.
Side latch
Lever
13. Make sure the hooks are engaged.
Lift the side latches with the palm of
your hand until the latches are locked.
Side
latch
Hook
CAUTION
After installation, verify that all
latches are secure. Operating the
vehicle with unlocked latches may
cause hardtop damage or loss.
14. Set the belt guides and the seats back to their original positions.
3-50
Knowing Your Mazda
Doors and Locks
MX-5_8X49-EA-07F_Edition5 Page110
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F
