2008 MAZDA MODEL MX-5 MIATA POWER RETRACTABLE HARDTOP belt

Black plate (57,1)
lVehicle roll-over may not provide
enough side force to deploy the side air
bags.
lSide impacts with two-wheeled
vehicles may not provide enough force
to deploy the side air bags.
Non-activation of side air bagí
A side air bag will not normally inflate in
the following cases:
lCollision from the rear.
lCollision from the front, but it may
deploy the front air bags.
qConstant Monitoring
The following components of the air bag
systems are monitored by a diagnostic
system:
lSAS unitlCrash sensorlAir bag moduleslSide crash sensorsí
lAir bag/Seat belt pretensioner system
warning light
lSeat belt pretensionerslRelated wiringlFront passenger air bag deactivation
switch
lDriver seat slide position sensorlFront passenger seat weight sensorslDriver and front passenger seat belt
buckle switches
The diagnostic module continuously
monitors the system's readiness. This
begins when the ignition switch is turned
to the ON position and continues while
the vehicle is being driven.
q Air Bag/Seat Belt Pretensioner
System Warning Light
If the air bag/seat belt pretensioner system
is working properly, the warning light
illuminates when the ignition switch is
turned to the ON position or after the
engine is cranked. The warning light turns
off after a specified period of time.
Essential Safety Equipment
SRS Air Bags
2-45íSome models.
MX-5_8X49-EA-07F_Edition5 Page57
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (59,1)
WARNING
Do not operate a vehicle with damaged
air bag/seat belt pretensioner system
components:Expended or damaged air bag/seat
belt pretensioner system components
must be replaced after any collision
which caused them to deploy or
damage them. Only a trained
Authorized Mazda Dealer can fully
evaluate these systems to see that
they will work in any subsequent
accident. Driving with an expended
or damaged air bag or pretensioner
unit will not afford you the necessary
protection in the event of any
subsequent accident which could
result in serious injury or death.
Do not remove interior air bag parts: Removing any components such as
the seats, dashboard, the steering
wheel or parts containing air bag
parts or sensors is dangerous. These
parts contain essential air bag
components. The air bag could
accidentally activate and cause
serious injuries. Always have an
Authorized Mazda Dealer remove
these parts.
Dispose of the air bag properly: Improper disposal of an air bag or a
vehicle with live air bags in it can be
extremely dangerous. Unless all
safety procedures are followed, injury
can result. Ask an Authorized Mazda
Dealer how to safely dispose of an air
bag or how to scrap an air bag
equipped vehicle. NOTEIf it becomes necessary to have the components
or wiring system for the supplementary
restraint system modified to accommodate a
person with certain medical conditions in
accordance with a certified physician, contact
an Authorized Mazda Dealer, refer to
“
Customer Assistance (U.S.A.) ”(page 9-2).
Essential Safety Equipment
SRS Air Bags
2-47
MX-5_8X49-EA-07F_Edition5 Page59
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (71,1)
ON
This is the normal running position after
the engine is started. The warning lights
(except brakes) should be inspected
before the engine is started (page 5-39).
NOTE
When the ignition switch is turned to the ON
position, the sound of the fuel pump motor
operating near the fuel tank can be heard. This
does not indicate an abnormality.
START
The engine is started in this position. It
will crank until you release the start knob;
then it returns to the ON position. The
brake warning light can be checked after
the engine is started (page 5-39).
Starting the engine
NOTE
lEngine-starting is controlled by the spark
ignition system.
This system meets all Canadian
Interference-Causing Equipment Standard
requirements regulating the impulse
electrical field strength of radio noise.
lThe advanced key must be carried because
the advanced key carries an immobilizer
chip that must communicate with the engine
controls at short range.
lWhen starting the engine, be sure the start
knob is securely attached before trying to
operate it. If the knob becomes detached
from the ignition switch, re-attach it by
pushing it on to the ignition switch.
1. Make sure the advanced key is beingcarried.
2. Occupants should fasten their seat belts.
3. Make sure the parking brake is on.
4. Depress the brake pedal.
Knowing Your Mazda
Advanced Keyless Entry and Start System
3-11
MX-5_8X49-EA-07F_Edition5 Page71
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (95,1)
Opening
Because nobody likes getting into a very
hot car, we have introduced a way to get a
head start on cooling it, even before you
put your seat belts on and insert your key
in the ignition. If you see the vehicle is in
a secure area, you can open the both
windows as you approach the vehicle to
get the air moving before you even step
into the hot vehicle.
WARNING
Use the auto-window function only
when you can see the vehicle and it is
in a secure area:Do not let children play with your
keys. If they open the window
without your knowing, the open
windows are an even bigger
invitation to a thief than leaving the
doors unlocked.
The windows can be opened for
ventilating the cabin before getting in the
vehicle.
Press once, then press again within 1.5
seconds and hold.
After the doors are unlocked, both
windows open while the unlock button is
pressed.
To stop the windows while opening,
release the button.
If the operation is performed from the
beginning again, the windows open.
NOTE
The unlock button does not operate unless it is
pressed twice sequentially.
Advanced key
Panic button
Unlock button Lock button
Trunk button
Retractable type key
Lock button
Unlock button
Trunk button Panic button
Knowing Your Mazda
Doors and Locks
3-35
MX-5_8X49-EA-07F_Edition5 Page95
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (99,1)
Convertible Top (Soft Top)í
Windshield headerTop latch assembly
Top storage area
Convertible
top's handlesLabel (The label indicates the position where convertible
top is to be held when lowering or raising it.)
qConvertible Top Precautions
WARNING
Sit in the seat with the seat belt
correctly fastened when the vehicle is
moving:
Standing in the vehicle, or sitting on
the convertible top storage area or
center console when the vehicle is
moving is a dangerous way to ride.
During a sudden maneuver or
collision you could be seriously
injured or even killed. Always keep your hands and fingers
away from the fastening mechanisms
when moving the convertible top:
It is dangerous to place your hands
or fingers near the fastening
mechanisms. Your hands or fingers
could be caught and injured by the
mechanism.
CAUTION
Remove leaves or other matter that
may accumulate on and around the
soft top. Otherwise, the water
drainage outlets could become
blocked, resulting in water leakage.
For detailed maintenance of the
water draining outlets, consult an
Authorized Mazda Dealer.
Knowing Your Mazda
Doors and Locks
3-39íSome models.
MX-5_8X49-EA-07F_Edition5 Page99
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (105,1)
qDetachable Hardtop Precautions
WARNING
Sit in the seat with the seat belt
correctly fastened when the vehicle is
moving:
Standing in the vehicle, or sitting on
the deck or center console when the
vehicle is moving is a dangerous way
to ride. During a sudden maneuver or
collision you could be seriously
injured or even killed.
Always drive safely and observe the
speed limit: Rollover accidents on a hardtop
vehicle are dangerous. The hardtop is
not as strong as a regular steel roof.
Rollover accidents could dislodge or
crush the hardtop and cause serious
injuries or even death, just as with no
top or the convertible top.
Always keep your hands and fingers
away from the fastening mechanisms
when moving the hardtop: It is dangerous to place your hands
or fingers near the fastening
mechanisms. Your hands or fingers
could be caught and injured by the
mechanism.
lWhen removing or installing the
hardtop, make sure the operation is
performed by 2 adults.
lBefore removing or installing the
hardtop, be sure you are parked out of
traffic in a flat area near the location
your hardtop is to be stored.
lWhen removing the hardtop, make sure
objects inside the vehicle are not blown
away by wind.
lSecure all loose objects inside before
driving with the hardtop removed.
lDo not drive through an automatic car
wash as it could damage the hardtop.
lDo not remove or install the hardtop in
a strong wind as it could damage the
hardtop or cause an unexpected
accident.
lBefore removing the hardtop, remove
the antenna.
lRemoving the hardtop while it's wet
can cause water to drip into the
passenger compartment.
qRemoving the Detachable Hardtop
1. Park the vehicle on a level surface and
firmly set the parking brake.
2. Lower the side windows, then turn off the ignition.
3. Remove the antenna if it is installed. Refer to Antenna on page 6-9.
4. Push the unlock button and fully release the top latch.
Unlock button
Top latch
Knowing Your Mazda
Doors and Locks
3-45
MX-5_8X49-EA-07F_Edition5 Page105
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (106,1)
5. Remove the seat belts from the beltguides.
Belt guide
6. Slide the seats forward.
Refer to Seat Slide on page 2-2.
7. Fold the seatbacks forward. Refer to Seat Recline on page 2-2.
8. Pull the levers and fully release the side latches.
Side latch
Lever
9. After the side latches are fully released,
release the lever. 10. Lift the side latches while pulling the
lever. Make sure the hooks are fully
released.
Side
latch
Lever Hook
11. Disconnect the rear window defroster
cord connector from the plug on the
inside of the hardtop.
3-46
Knowing Your Mazda
Doors and Locks
MX-5_8X49-EA-07F_Edition5 Page106
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F

Black plate (107,1)
12. Slide the hardtop rearward whilepressing down on the rear deck
latches to unlock the latches.
Hardtop
Rear deck latch
13. Lift the hardtop straight off the bodyto prevent damage to the rear deck
latches and studs.
Hardtop
Rear deck stud
WARNING
Be careful of the windshield's edges
when getting into or out of the vehicle:
Not being careful of the windshield's
edges when getting into or out of the
vehicle is dangerous. The
windshield's edges could scratch and
cause injuries.
CAUTION
ØBe careful not to strike the body
with any of the protruding
hardtop latches.
Ø Use extreme care when carrying
the hardtop to prevent scratching
or other damage to it.
NOTE
Points to remember when storing the
detachable hardtop.
lDo not place the hardtop on a hard surface,
such as concrete or asphalt. Place it on a
cushioning material, such as an old
blanket.
lBe sure the top and side latches are locked.lDo not lean the hardtop against a wall or
stand it in an unstable way.
lStore the hardtop in a dry clean area, and
cover it with a soft material, such as an old
blanket.
14. Return the belt guides and the seatbacks to their original positions.
15. Disconnect the hardtop rear window defroster coupler (A) from the coupler
(B), and remove the convertible top
rear window defroster coupler (C)
from its holder (D).
(A)
(B)
(C)
(D)
Knowing Your Mazda
Doors and Locks
3-47
MX-5_8X49-EA-07F_Edition5 Page107
Thursday, February 21 2008 12:50 AM
Form No.8X49-EA-07F