2008 MAZDA MODEL CX-9 warning light

DRIVER’S VIEW
Always check the Owner’s Manual for more operating information and safety features
1. Power window switches,
see Mirrors/Windows
2. Door locks, see Locks
3. Mirror controls,
see Mirrors/Windows
4. HID headlights
leveling switch*
Set position at 0 unless vehicle
is loaded heavily, leveling
switch adjusts headlight angle
to compensate for weight of
passengers and cargo, see
Owner’s Manual.
5. Air vents
6. TCS OFF switch,
see Instrument Cluster
7. Turn signal/lighting control
lever, see Getting Started8. Audio control switches,see Audio Systems
9. Horn/Air bag
10. Cruise control, see Getting Started
11. Wiper/washer control lever,see Getting Started12. Information display,see Audio Systems
13. Hazard warning switch
Push to activate/deactivate.
14. Passenger air bag off
indicator, see Getting Started
15. NAVI display*,
see Owner’s Manual
Audio system,
see Audio Systems
16. Climate control panel,
see Climate Controls
17. Seat warmer*, Press: On/off.
18. Accessory socket
19. Cup holders
To access cup holders:
Press cover down and lift.
20. Auxiliary jackConnect portable music device
to in-vehicle audio system.
21. Gearshift lever, see Transaxle
22. Storage
Driver’s
View
AUTO
OFF DUAL
PASS OUTSIDE A/C
MODE C H C H
FRONT REAR REAR
CONTROL
km/h mph
E F H
C
x10002 3 4
5
6
7
8
TRIP 1
0 0 20 40 60 80
10 0
12 0
140 220 20 40 60 80 100 120
140
160
180
200
P
R
N
D
M
8 2112
382.3
1 2 2 3 5 5 5 4 121413
272826
29
19
22
REAR
S
E
T
+

S
E
T
-
O
N

O
F
F VOL
+

– MOD
E
1197810
232524M
P
R
N
D 21
18 20
16
18
15
17
6
23. Tilt/telescopic steering-
wheel release lever,
Pull lever down to unlock
column; adjust tilt angle/column
length; pull up to lock column.
WARNING: Do not adjust
steering-wheel while driving
because you may lose control
of the vehicle.
24. HF/TEL Hands-Free Telephone
button*,
see Getting Started
25. Power liftgate switch*
Press for one second or more
to fully open/close liftgate.
26. Hood release handle
Pull release handle to unlock.
27. Parking-brake
To engage: Push down; to release:
Push down slightly, then release.
28. BSM OFF switch*, see Getting Started
29. Fuel-filler lid release
To open: Pull lever upward
and release.
Getting Started
MAZDA CX-9 Quick Tips®are
designed to quickly familiarize
you with some important
features of your MAZDA CX-9.
This Driver’s View tab is your
index to the Quick Tips
®, locate
the item you would like to
learn more about and then
turn to the listed tab.
Be sure to see the tab called
Getting Started, this section
contains important operating
tips about your MAZDA CX-9.
Items identified in blue text
call out unique features.
*Denotes optional equipment

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Bluetooth
Hands-Free
Telephone
(HF/TEL)*
System consists
of Hands-Free
Telephone
(HF/TEL) button
(1) located on
steering-wheel, information display,
microphone and audio/navigation
system*; system only functions
with a Bluetooth type mobile
telephone, a mobile telephone
can be programmed only when
vehicle is parked.
Hands-Free Telephone setup
Pair a phone
1. Press telephone button (1);
say “setup.”
2. System prompts you with available
options; say “pairing options.”BSM warning
light (1) will
appear in
either outside
side-mirror
when a vehicle
is detected in the
detection area.
Tip: Audible warning beep
is heard when turn signal
is activated and a vehicle is
detected in the detection area.
WARNINGS: Do not rely
completely on BSM system;
make sure to look over your
shoulder before making any
lane change.
BSM system may not function
normally when towing a
trailer, system should
be deactivated.
Getting
Started
Getting
Started
LanguagePress telephone button (1);
say “setup”after beep, say
“language”after beep, say “English,”
“French” or “Spanish,”you will be
asked “is this correct,”say “yes”
after the beep, then follow any
additional prompts.
Dialing a phone numberPress telephone button (1); say “dial”
after beep, slowly say phone number
after the prompt, system verifies
number is correct; then connects
your call.
Redialing last-called numberPress telephone button (1); say
“redial”after beep, system will
redial last dialed phone number.
See Owner’s Manual
for complete operating
instructions and warnings. Blind Spot Monitoring
(BSM)*
BSM system will assist driver
by monitoring detection areas
on either side of vehicle to
the rear.
System is only active above
20-mph.
3. After prompts, say “pair a phone.”
4. System will request a 4-digit
PIN of your choice (record PIN
number for future phone pairing
procedure), slowly say your
4-digit PIN and confirm.
5. After prompt, follow phone
manufacturer’s instructions to
search for Bluetooth device.
6. Once device is found, select
“Mazda,”enter your selected
4-digit PIN on phone’s numeric
keypad when requested.
7. System prompts you to name
the phone.
8. System will ask for a phone
priority number between 1-7,
1 being highest.
9. When programming is complete,
system will indicate“pairing
complete.”
*Denotes optional equipment
1
Detection
Areas
VOL+
–MOD
E
1
Deactivating
BSM system:
Press BSM OFF
switch (2),
indicator will
illuminate
in instrument
cluster.
Press BSM OFF switch again
to reactivate system.
Indicator light flashes if system
has a malfunction, dealer
inspection required.
See Owner’s Manual
and BSM Quick Start Guide
for complete operating
instructions and warnings.
BSMOFFBSM
OFF
2

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Advanced
keyless entry/
start system*
Advanced key
must be carried
by driver to
operate properly.
Refer to Owner’s Manual for
addi tional instructions.
Tip: Do not use advanced key
with activated cell phone in
the same pocket, advanced key
functions may become disabled.
Advanced keyless
system customization
Your authorized Mazda Dealer can
customize your system if desired
with features such as auto-lock,
which can be programmed to
automatically lock vehicle after
driving and exiting vehicle.
For additional information,
see Owner’s Manual. Passenger’s door request switch:
Press (
6) on passenger’s door; all doors
and liftgate unlock simultaneously.
Liftgate request switch: Press ( 7)
on liftgate, doors and liftgate
will lock/unlock.
Advanced key transmitter:
Press button ( 2) for driver’s
door; press again within 1 1/2
seconds to unlock other doors
and liftgate, hold to lower front
windows and open moonroof,
release to stop; with all doors
unlocked, press and hold button ( 3) for one second
or more to open/close liftgate.Activating panic alarmPanic alarm: Press and hold
button ( 4) for more than 1 second;
horn sounds, hazard warning
lights flash; to stop, press
any remote button.

area, engine may not start
or warnings may activate.
Turning off engine
Turn start knob to ACC position
to turn engine off, push in and
turn start knob to LOCK position.
Tip: Vehicle battery may be
discharged and vehicle security
compromised if start knob is
left in ACC position.
Always put vehicle in Park ( P), set
parking brake and turn start knob to
LOCK position when exiting vehicle.
System operation warningsKEY indicator light flashes (green)
indicates advanced key transmitter
battery power is low.
KEY indicator light illuminated
continuously (red) indicates system
malfunction, and auxiliary key
should be used, have vehicle
inspected at an Authorized Mazda
Dealer as soon as possible.
Tip: When using advanced
keyless system, unless
reprogrammed by dealer,
system will beep as confirmation
of lock/unlock requests, system
will also beep if start knob is
left in ACC position, advanced
key has been left in vehicle or
if advanced key is removed from
vehicle while vehicle is running.
For additional system operation
warnings, see Owner’s Manual.
Replacing batterySee Owner’s ManualCautions on useTo avoid damage to advanced
key, do not allow any severe
impacts or contact with liquids,
do not place heavy objects on
advanced key and do not leave
advanced key exposed to direct
sunlight or high temperatures,
see Owner’s Manual for all
cautions and warnings.
Getting
Started
Getting
Started

1 2
5
4 3

*Denotes optional equipment
Starting enginePress start knob
( 8 ); when KEY
indicator (green)
illuminates on
instrument
cluster; turn start knob ( 8) to
START position to start engine.
Auxiliary key operationIf advanced key cannot be used
due to a malfunction or dead
advanced key battery, use auxiliary
key ( 5) to lock/unlock doors and
to start vehicle.
To start vehicle: Remove start
knob cover ( 8) by pressing both
side release buttons ( 9) while
pulling; insert auxiliary key into
key cylinder and turn to start engine.
Tip: Do not place advanced key
on or around dashboard, storage
compartments such as glove
box or in open liftgate/cargo Locking doors
Driver’s/passenger’s door request
switch: Press (
6) once on either
door to lock other doors.
Press and hold driver’s door request
switch ( 6) to close windows and
moonroof, release to stop.
Advanced key transmitter:
Press button ( 1); pressing again
within a few seconds causes doors
to relock and horn to beep.
Unlocking doors/
opening liftgate
Driver’s door request switch: Press
( 6 ) to unlock driver’s door; press
again within 3 seconds to unlock
other doors and liftgate.

LOCK ACC ON STARTPU SH
989
6
7

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Wiper/washer leverSingle wipe: Push lever up.
Washer: Pull back, also operates wipers.
Intermittent wiper: One click down, to
change interval speed rotate ring (1).
Auto*: One click down, rain sensor
senses rain amount on windshield,
then controls wiper automatically.
Rain sensor sensitivity is adjusted
from high sensitivity (+) to less
sensitivity (-) by rotating ring ( 2).
Passenger air bag
deactivation indicator light
Front air bag deactivation indicator
light ( 5) provides current status
of front passenger air bag and
pretensioner system.
If total seated weight on front
passenger seat is less than
approximately 66 lb., front
passenger air bag deactivation
indicator light illuminates,
front passenger and side air
Getting
Started
Getting
Started
bags/pretensioner will not
deploy/activate in an accident.
If the total seated weight
is greater than approximately
93 lb., light does not illuminate,
and the front passenger and side
air bags/pretensioner will deploy/
activate in an appropriate accident.
See Owner’s Manual for additional
information on this feature and
the air bag system.
WARNINGS: Even with a
deactivation system, never
place rear-facing infant-safety
seat in front of any air bag,
an infant is in serious danger
of being injured or killed.
If you must install a forward-
facing child-safety seat in
the front seating position,
move vehicle seat as far
back as possible.
High beams on/off: Push
forward/pull back to detent.
To flash high beams: Pull back
slightly and release.
AUTO* = With ignition switch
in ON position; headlights and
exterior lights automatically
turn ON/OFF depending on
surrounding darkness/lightness;
rotate knob ( 4) to third notch
= Fog lights* on: Rotate ( 5);
functions only with low beams on
Turn signals right/left: move
lever up/down.
Tip: With AUTO* ON/OFF or
auto OFF system, headlights
switch off automatically within
30 seconds if lights are left on
or with AUTO selected, switch
in lock position or key
removed.

Cruise
control
Operates
above 19 mph.
Push up/press
down ON/OFF
switch ( 1) to
enable/disable.
To set speed: Press switch ( 2)
down and release.
To increase set speed: Push switch
( 2 ) up and release at desired speed.
To decrease set speed: Press switch ( 2)
down and release at desired speed.
To cancel: Press down ON/Off
switch ( 1), tap brake or press
CANCEL switch ( 3).
To resume cruising speed:
Press switch ( 4); resume function
will not operate if cruise control
was cancelled using ON/OFF
switch. Normal wiper speed: Two clicks down.
High-speed wiper: Three clicks down.
Rear window wiper/washer To activate rear interval wiper:
Rotate knob (
3) up to INT.
To activate rear normal speed
wiper: Rotate knob ( 3) up to ON.
To activate rear washer: Rotate
knob ( 3) to and release.
Turn signal/lighting leverOFF = Lights off
= Tail, parking and dashboard
lights on: Rotate knob ( 4) to first notch
= Tail, parking, dashboard
and headlights on: Rotate knob
( 4 ) to second notch

S ET +
S ET -
ON
OF F
4312
54
AUTO
1 3
REA R
2
R
EA
RAU TO
3
LOAD
km/h mph H
C0
20 40
60
80
10 0
12 0
14 0 220
20
40
60
80
100
120
140
160
18 0
200 12 2.3
5
PASS AIR BAG OFF OUTSIDE PASS72.0 oF
*Denotes optional equipment

INSTRUMENT CLUSTER
Always check the Owner’s Manual for more operating information and safety features
WARNING LIGHTS
• Cruise control onAmber light: Cruise control system
activated; Green light: Cruising
speed set; see Getting Started
• Tire Pressure Monitoring System (TPMS)*,
see Driving Tips
• High beams on • Engine oil-pressure Stop car when safe and turn
off engine; check oil level
• Brake system Parking brake on/low brake fluid
• Always fasten seat belts • Security indicator light*
• KEY*,see Getting Started
• O Low fuel
• BSM OFF*BSM system is deactivated,
see Getting Started

BSM
OFF
GAUGES
1. Instrument cluster dimmer select knob
With headlights ON: Rotate knob
to increase/decrease brightness.
Headlights/parking lights ON,
ignition key ON: Illumination
changes brightness when knob
is pressed.
2. Tachometer
3. Gear position indicator Displays current gear
position or manual mode.
4. Gear indicator Displays current gear
when in D or M.
5. Speedometer
6. Odometer/Trip meter selector
Press to view odometer, trip
meter A and B; press and hold
to reset trip meter A/B settings.
• Check engineDealer inspection required if light
remains on, see Owner’s Manual
• Charging system Charging system malfunction;
dealer inspection required
• Air bag/front seat belt pretensioner system
If light flashes or stays on, the air
bags/front seat belt pretensioners
may not operate in an accident;
dealer inspection r equired
• AT Automatic transaxle*
Automatic transaxle malfunction;
dealer inspection required
• Anti-lock Brake System (ABS)
ABS malfunction, normal brakes
only; dealer inspection required
• Check fuel cap Fuel cap not securely tightened
• Door ajar
7. Engine coolant temperature gauge
Stop car if above normal
range, turn off engine, let
vehicle cool; check coolant
level when safe.
InstrumentCluster
Instrument Cluster
km/h mph
E F H
C
x1000r/min2 3
4
5
6
7
8
TRIP
1 0
0
20 40
60
80
10 0
12 0
140 220
20
40
60
80
100
120
140
160
18 0
200
P
R
N
D
M
8
2112
382.3
8 7 9
4 1 6 2 5
KEY
CRUISE
AT
4WD
3
BSM
OFF
8. Odometer/Trip meter
9. Fuel gauge 20.1-gallon/76-liter tank
CRUISE• TCS OFFTraction Control System is
deactivated
• Lights ON indicator light*
• Traction Control System (TCS)/Dynamic
Stability Control (DSC)/
Roll Stability Control (RSC)
Light flashes when system is
activated while driving; dealer
inspection required if light
remains on
•
4WDAWD warning light*
Flashing lamp indicates high
temperature differential oil,
illuminated lamp indicates an
abnormality with AWD system;
dealer inspection required
• Powertrain malfunction/ reduced power
Dealer inspection required if light
remains on, see Owner’s Manual
*Denotes optional equipment

LOCKS
Always check the Owner’s Manual for more operating information and safety features
LiftgateTo open: Pull
up on handle
(3) and raise;
to close: Push
liftgate down
with both hands
until in near-shut
position, easy closure system will
close liftgate completely.
Liftgate request switchLiftgate request switch* (4)
operation, see Getting Started.
Power
liftgate
close switch
Press (5) for
one second or
more; hazard
warning lights
flash twice;
liftgate closes automatically
after beep sound is heard.
WARNINGS: Always make
sure hatch opening is clear
before opening/closing
Never place hands or fingers
around liftgate because
liftgate closes automatically
from near-shut position, this
could cause hands and fingers
to be pinched and injured.
Child-safety
locks
Located at edge
of rear doors.
To activate:
Pull tab (6) up;
door opens from
outside only.
To cancel: Push tab (6) down.
WARNING: Since children
may access either rear door,
child-safety locks for both rear
doors should be activated.
Locks
Locks
Key
Operates ignition and all locks.
Tips: Use key number plate to
purchase a new key; store in
safe place separate from vehicle.
Only advanced keyless
system* automatically locks
doors when leaving with key
(dealer programmable feature).
Retractable type key
To fold/unfold press button (1).
Auxiliary key*See Getting Started
Manual door
locks
To lock: Press
front of button (1)
toward door handle.
To unlock: Pull front
of button away
from door handle.
Power door locks
To lock/unlock all doors and liftgate
from inside vehicle: Press bottom/
top of switch (2).
Using mechanical key to unlock
driver’s front door: Rotate key to
counterclockwiseposition for more
than one second to unlock other
doors and liftgate, continue to hold
key in unlock position to roll front
windows down and open moonroof.
Using key to lock all doors: Rotate
key to clockwise position, continue
to hold key in lock position to
roll front windows up and close
moonroof, release to stop.Keyless entry
system
Functions only
with ignition in
OFF position.
To lock doors:
Press button (2);
pressing again within a few
seconds causes doors to relock
and horn to beep.
To unlock: Press button (3)
for driver’s door; press again
within 3 seconds to unlock other
doors and liftgate, press and hold
to lower driver’s and passenger
windows and open moonroof,
release to stop.
Panic alarm: Press and hold
button (4) for more than 1
second; horn sounds, hazard
warning lights flash; to stop,
press any remote button.
34
6Lock
Unlock
5
Advanced
keyless entry/
start system/
auxiliary key*
See Getting
Started
Illuminated entry system
Activates interior lights when dome
light switch set to DOOR position;
lights off after driver’s door is
locked or ignition in ON position.
Immobilizer system
Prevents engine from running
unless coded key is used,
see Owner’s Manual.
WARNING: Never leave a child
alone in vehicle and never
leave any key where a child can
find it, particularly advanced
keys which give easier
access to a curious child.
2
1
1
234
*Denotes optional equipment

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
1. Air flow selections= air to dash
= air to dash and floor
= air to floor
= air to floor and windshield
= air to windshield (defrost)
2. Temperature control driver/passenger
Cooler/warmer = rotate knob
counterclockwise/clockwise
3. A/C = air conditioner
Press to turn on/off.
4. OFF Press to turn system OFF.
5. Fan control Rotate knob clockwise/
counterclockwise to increase/
decrease fan speed. 8. Air intake control
Press switch to alternate
between recirculated (Indicator
light on) or outside (Indicator
light off) air mode.
= recirculate inside air;
use for maximum cooling
WARNING: Do not use position in cold
weather, windows may
fog and hamper vision.

Automatic operation
Press AUTO ( 13) for automatic
operation; rotate outer dial to set
temperature, refer to information
display for air flow selection, see
Owner's Manual.
Tip: Automatic climate control
display viewed via information
display, see Audio Systems.
6. Outside Press Outside button ( 6) to display
outside temperature, press again
to switch display to temperature
set for air conditioner.
Tip: To change from
Fahrenheit to Centigrade
or vice versa: Press and
hold Outside button ( 6)
for 3 seconds or more.
7. Dual Press ( 7) to switch between
dual (driver/passenger) or
individual temperature (indicator
light on) operation modes. 9. Rear control
10. Seat warmer* Press on/off.
11. Rear window defogger
Press on/off; shuts off with
ignition or automatically after
15 minutes of operation; also
operates heated outside mirrors*.
12. Windshield defroster switch
Press: Fresh air position is
automatically selected, A/C
automatically turns ON.

Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, selected.
Tip: To help prevent
windshield fogging in humid
weather, select before
starting engine.
To prevent moisture buildup,
never drive with system off.
Objects placed under the
front seats may interfere
with air flow to the rear.

Rear climate controlTurn air conditioning ( 3) on; press rear
control button ( 9), indicator light on,
rear passengers can now control fan
speed ( 14) and rear temperature ( 15).
Control On indicator ( 16) is
illuminated when rear climate
control is active.
Climate
Controls
Climate
Controls

AUTO
OFF DUAL
PASS
OUTSIDEA/C
MODE
5223137641
FRONT REAR REAR
CONTROL
LR CH
CH
1211101098
*Denotes optional equipment
CHOFFMAX
151416When rear control switch (9
) is
OFF; rear climate control is not
possible, temperature and airflow
operates in response to front
control settings.

CARGO AREA
Always check the Owner’s Manual for more operating information and safety features
Cargo Area
Driving Tips
Spare tire
1. Temporary spare tire
Stored under vehicle; to change
flat tire: Follow instructions in
Owner’s Manual.
WARNING: Do not exceed
50 mph with temporary spare.
Tip: For instructions
and restrictions on use
of temporary spare tire,
see Owner’s Manual.
Gas cap
After filling vehicle with gasoline,
fully reinstall gas cap by turning
clockwise until a clicking sound is
heard, if gas cap is not fully installed,
Check Engine light and/or gas cap
indicator light may come on.
For more information on Check
Engine light, see Owner’s Manual.
Tire economy and tipsCheck tire pressure monthly when
tires are cold, use a digital tire
pressure gauge for accurate tire
pressure measurement.
Tires should be of the same
type and size.
Maintain correct front-end alignment
and tire balance; rotate tires at
5,000 or 7,500 mile intervals; see
Owner’s Manual for rotation chart.
Tire pressure Decal on Driver’s B-pillar provides
tire pressure information.
Tire Pressure Monitoring
System (TPMS)
Warning light illuminates for a
few seconds after ignition is on.
If tire pressure is too low in one
or more tires, warning light will
illuminate and beeper will sound;
flashing warning light indicates
possible malfunction; dealer
inspection required.
Anti-lock Braking
System (ABS)
ABS automatically reduces
hydraulic pressure to any wheel
on the verge of locking up.
You may feel a slight pulsing of
the brake pedal and hear a clicking
noise; this tells you the ABS is
functioning properly; increase pressure
on pedal for maximum braking.
Tips: Maintain constant
pressure on the brake pedal.
Do not pump the brakes.
2. Jack
Located behind panel
3. Lug wrench and jack lever
4. Spare tire carrier bolt
socket
5. Spare tire carrier bolt
Located behind panel
6. Spare tire hold down strap
7. Tiedown eyelet
8. Navigation DVD player*
†
Cargo area
9. Cargo securing loops
10. Cargo floor
Tip: Cargo floor cover can
be secured in raised position
by attaching third-row
straps (14) to underside
of floor cover.
11. Rear accessory socket
12. Rear auxiliary terminals*
13. Power outlet (AC 115V)*
Cargo light
Located on interior side of liftgate,
see Interior Lights for operation.
10 9911141312
3 7 12 58 46
ABS self test
A self-diagnostic test is
performed when starting;
you may feel some brake pedal
pulsation and hear some noise,
this is normal.
Traction Control System (TCS)
Enhances traction and safety
by regulating engine torque.
When TCS detects drive wheel
slippage it lowers engine torque
to prevent loss of traction.
Dynamic Stability Control (DSC)
Controls braking and engine
torque in conjunction with ABS
and TCS to help control side slip
on slippery surfaces or during
sudden or evasive maneuvering.
Roll Stability Control (RSC)
System determines when corrective
action is needed; by controlling
engine torque and braking on
each wheel.
*Denotes optional equipment†See Owner’s Manual