2008 MAZDA MODEL CX-7 ECO mode

GETTING STARTED
Always check the Owner’s Manual for more operating information and safety features
Steering-
wheel
audio
controls
To increase/
decrease
volume:
Press (4).
Press ( 5) to either mute standard
Audio system or activate
Navigation Voice Command*.
Press ( 6) to select AM, FM 1,
FM 2 and CD mode.
Radio: Press ( 7) less than
one second to select next/previous
preset station, press ( 7)
more than one second until beep
sound is heard to seek next/
previous station.
CD: Press ( 7) to select next
track, press ( 7) to repeat
current track.

/
/
Getting
Started
Getting
Started
Tilt
steering-
wheel
release lever
Pull lever ( 8) down
to unlock column
and pull up to
lock column.
WARNING: Do not adjust
steering-wheel while driving
because you may lose control
of the vehicle.
AUTO* = With ignition switch
in ON position; headlights and
exterior lights automatically
turn ON/OFF depending on
surrounding darkness/lightness;
rotate knob ( 1) to third notch
= Fog lights* on: Rotate ( 2);
functions only with low
beams on
Turn signals right/left: move
lever up/down.
Cruise
control
Operates
above
19 mph.
Press ON/OFF
switch ( 1) to
enable/disable.
To set speed: Press switch ( 2)
down and release.
To increase set speed: Push
switch ( 2) up and release
at desired speed.
To decrease set speed: Press
switch ( 2) down and release
at desired speed.
To cancel: Tap brake or press
CANCEL switch ( 3).
Turn signal/lighting
control lever
OFF = Lights off
= Tail, parking and
dashboard lights on: Rotate
knob ( 1) to first notch
= Tail, parking,
dashboard and headlights on:
Rotate knob ( 1) to second notch
High beams on/off: Push
forward/pull back to detent.
To flash high beams: Pull back
slightly and release.
Rear window wiper/washer To activate rear interval wiper:
Rotate knob ( 4) up to INT.
To activate rear normal speed
wiper: Rotate knob ( 4) up to ON.
To activate rear washer: Rotate
knob ( 4) to and release.Wiper/washer control leverSingle wipe: Push lever up.
Washer: Pull back, also operates wipers.
Intermittent wiper: One click down.
To change interval speed: Rotate
inner ring ( 3).
Normal wiper speed: Two clicks down.
High-speed wiper: Three clicks down.
*Denotes optional equipment
21
AUTO
R EA R
43
M IS TPU LL
8
31
ON OFF CANCEL
RES/ +
SET/–
256
VOL+ – MODE
47

REAR SEATS
Always check the Owner’s Manual for more operating information and safety features
Automatic
Transaxle
Gearshift
must be in
Park or
Neutral to
start engine;
it must
be in Park
to remove
ignition key.
P = Park
To move gearshift from Park:
Press firmly on brake pedal then
move the shift lever out of P.
R = Reverse
N = Neutral
No gear engaged.
D Drive (Overdrive)
For normal driving: Shifts through
all forward gears automatically.
Rear Seats
Transaxle
Rear center position seat belt†
Connecting seat belt: Pull seat
belt from ceiling recess ( 1) and
connect tongue ( 2) to anchor ( 3).
Wearing seat belt: Slowly pull out
lap/shoulder belt ( 4) and insert
tongue ( 5) into buckle ( 6) until
click is heard.
Unfastening seat belt: Depress
buckle button ( 6) to release.
Tip: Leave center-rear lap portion
of seat belt fastened at all times
except when folding rear seat.
Stowing seat belt: Insert key or small
object in anchor buckle slot ( 7) to
release entire belt, let it fully retract,
then put tongues ( 2) and ( 5) together,
insert securely into recess ( 1). Folding second-row seats
Unfasten lap portion of center-rear
seat belt; push knob (
8) down and
carefully lower seatback downward.
See Cargo Area tab for location of
rear cargo area remote handle levers.
Returning seatbacks to
original positions
Raise seatback to upward position.
Make sure seatback is locked
into position.
M (Sport A/T
manual shift mode)
Move shifter from
D to M to engage
manual shift mode,
M will be illuminated
for manual mode on
shift position indicator located
in the instrument panel.
Manual shifting of transmission
is achieved by moving shifter
back to upshift and forward to
downshift, move shifter from
M to D to engage automatic
shift mode.
Gear
indicator
Illuminated
numeral of
gear indicator
located in the
instrument panel
displays current gear in
Automatic and Manual
shift modes.
Tips: Back-up camera*
automatically operates when
gearshift lever is placed into
reverse and is viewable via
navigation display screen.
When using back-up camera,
objects may be closer than
they appear, please check
your surroundings.

P
R
N
D
M
8
140220
200P
R
N
D
M
*Back-up camera feature is only available with optional Technology Package
†See Owner’s Manual
8
8
2
1
365
4
7

CLIMATE CONTROLS
Always check the Owner’s Manual for more operating information and safety features
1. Air flow selections= air to dash
= air to dash and floor
= air to floor
= air to floor and windshield
= air to windshield (defrost)(Manual Climate Control) 6. Air intake control
Press switch to alternate
between recirculated (Indicator
light on) or outside (Indicator
light off) air mode.
= recirculate inside air;
use for maximum cooling
WARNING: Do not use position in cold
weather, windows may
fog and hamper vision.

Automatic operation
Press AUTO ( 10) for automatic
operation; rotate outer dial to set
temperature, refer to information
display for air flow selection, see
Owner's Manual.
Tip: Automatic climate control
display viewed via information
display, see below.
2. Fan control Rotate knob clockwise/
counterclockwise to increase/
decrease fan speed.
3. Temperature control Cooler/warmer = rotate knob
counterclockwise/clockwise
4. A/C = air conditioner
Press to turn on/off
5. Rear window defogger Press on/off; shuts off with
ignition or automatically after
15 minutes of operation; also
operates heated outside mirrors*.
7. AMB*Press AMB button ( 7) to display
ambient temperature, press again
to switch display to temperature
set for air conditioner.
Tip: To change from
Fahrenheit to Centigrade or
vice versa: Press AMB button
(7) for 3 seconds or more.
8. Windshield defroster switch
Press: Fresh air position is
automatically selected, A/C
automatically turns ON.
9. OFF Press to turn system OFF.

Control positions for
maximum defrost
Fan to maximum, temperature
to maximum hot, selected.
Tip: To help prevent
windshield fogging in
humid weather, select
before starting engine.
To prevent moisture buildup,
never drive with system off.
Objects placed under the
front seats may interfere
with air flow to the rear.

Information DisplayInformation display ( 1) has
the following functions: Clock,
audio display, automatic climate
control display* and ambient/cabin
temperature display* (AMB).Tip: Manual climate
control not viewable via
information display.
Climate
Controls
Information Display

04 13
2
321
645
A/CA/C AMB
CHPUSHAUTOPUSHOFFFRONTMOD
E
4657910
2381
Manual A/C Automatic A/C*
*Denotes optional equipment
88:88 FM1 88.9 88.8CHDISC IN MD W ST RPT RDM AUTO-M8AMB FOAUTOA/C ECO1