2008 MAZDA MODEL B2300 TRUCK spare wheel

[x] Cancel search: spare wheel

Page 126 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) When your temporary spare tire is installed
When one of your road tires needs to be replaced with the temporary
spare, the TPMS system will continue to identify an issue to remind you
that the damaged

Page 127 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Low Tire Pressure
Warning LightPossible cause Customer Action Required
Solid Warning Light Tire(s) under-inflated1. Check your tire pressure to
ensure tires are properly
inflated; refer to
Inflating
y

Page 128 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Low Tire Pressure
Warning LightPossible cause Customer Action Required
Flashing Warning
Light Spare tire in use Your temporary spare tire is in
use. Repair the damaged road
wheel and re-mount it on th

Page 179 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box Description
44 15A* Ignition coil, Capacitor
45A — Not used
45B — Not used
46A — A/C clutch solenoid
46B — Not used
47 — PCM relay
4

Page 180 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) WARNING: Refer toTire Pressure Monitoring System (TPMS)
in the Tires, Wheels and Loading chapter for important
information. If the tire pressure monitor sensor becomes
damaged, it will no longer funct

Page 181 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) •Comfort and noise
• Ground clearance and parking at curbs
• Winter weather driving capability
• Wet weather driving capability
For vehicles equipped with 4WD, it is not recommended that the v

Page 182 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Stopping and securing the vehicle1. Park on a level surface, activate hazard flashers and place
gearshift lever in P (Park)
(automatic transmission) or 1
(First) (manual transmission).
2. Set the park

Page 183 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) When connecting the jack handle, assemble the following:
•one handle extension and one
typical extension. To assemble,
slide parts together. To
disconnect, depress button and
pull apart.
• one whe
Page:   < prev 1-8 9-16 17-24 next >