2008 MAZDA MODEL B2300 TRUCK sensor

[x] Cancel search: sensor

Page 116 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) It is recommended that the two front tires or two rear tires generally be
replaced as a pair.
The tire pressure sensors mounted in the wheels (originally installed on
your vehicle) are not designed to

Page 125 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.WARNI

Page 171 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) The fuses are coded as follows:
Fuse/RelayLocation Fuse Amp
Rating Passenger Compartment Fuse Panel
Description
1 5A Instrument panel dimmer switch
2 10A Trailer tow park lamps
3 10A Right low beam he

Page 175 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box Description
15 — Not used
16 — Not used
17 40A** Anti-lock Brake System (ABS) module
18 — Not used
19 20A** Engine fan
20 — Not used
2

Page 178 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box Description
15 — Not used
16 — Not used
17 40A** Anti-lock Brake System (ABS) module
18 — Not used
19 — Not used
20 — Not used
21 10

Page 179 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Fuse/RelayLocation Fuse Amp
Rating Power Distribution Box Description
44 15A* Ignition coil, Capacitor
45A — Not used
45B — Not used
46A — A/C clutch solenoid
46B — Not used
47 — PCM relay
4

Page 180 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) WARNING: Refer toTire Pressure Monitoring System (TPMS)
in the Tires, Wheels and Loading chapter for important
information. If the tire pressure monitor sensor becomes
damaged, it will no longer funct

Page 182 of 280

MAZDA MODEL B2300 TRUCK 2008  Owners Manual (in English) Stopping and securing the vehicle1. Park on a level surface, activate hazard flashers and place
gearshift lever in P (Park)
(automatic transmission) or 1
(First) (manual transmission).
2. Set the park
Page:   < prev 1-8 9-16 17-24 next >