Readiness for Inspection/Maintenance (I/M) testing
Some state/provincial and local governments may have
Inspection/Maintenance (I/M) programs to inspect the emission control
equipment on your vehicle. Failure to pass this inspection could prevent
you from getting a vehicle registration. Your vehicle may not pass the I/M
test if the
indicator is on or not working properly (bulb is burned
out), or if the OBD-II system has determined that some of the emission
control systems have not been properly checked. In this case, the vehicle
is considered not ready for I/M testing.
If the
indicator is on or the bulb does not work, the vehicle may
need to be serviced. Refer to the On board diagnostics (OBD-II)
description in this chapter.
If the vehicle’s engine or transmission has just been serviced, or the
battery has recently run down or been replaced, the OBD-II system may
indicate that the vehicle is not ready for I/M testing. To determine if the
vehicle is ready for I/M testing, turn the ignition key to the ON position
for 15 seconds without cranking the engine. If the
indicator blinks
eight times, it means that the vehicle is not ready for I/M testing; if
the
indicator stays on solid, it means that the vehicle is ready for
I/M testing.
The OBD-II system is designed to check the emission control system
during normal driving. A complete check may take several days. If the
vehicle is not ready for I/M testing, the following driving cycle consisting
of mixed city and highway driving may be performed:
15 minutes of steady driving on an expressway/highway followed by 20
minutes of stop-and-go driving with at least four 30-second idle periods.
Allow the vehicle to sit for at least eight hours without starting the
engine. Then, start the engine and complete the above driving cycle. The
engine must warm up to its normal operating temperature. Once started,
do not turn off the engine until the above driving cycle is complete. If
the vehicle is still not ready for I/M testing, the above driving cycle will
have to be repeated.
2008 B-Series(mbs)
Owners Guide (post-2002-fmt)
USA(fus)
Maintenance and Specifications
250
A
ABS (see Brakes) .....................151
Air cleaner filter ...............257, 259
Airbag supplemental restraint
system ..........................................86
and child safety seats ..............89
description ................................86
disposal ......................................91
driver airbag ........................86, 89
indicator light ...........................90
operation .............................86, 89
passenger airbag .................86, 89
Ambulance packages ....................7
Antifreeze
(see Engine coolant) ................234
Anti-lock brake system
(see Brakes) ......................151–152
Anti-theft system ........................66
Audio system
(see Radio) ......................19, 21, 27
Automatic transmission ............156
driving an automatic
overdrive .................................157
fluid, specification ..................259
Auxiliary input jack (Line in) ....32
Auxiliary power point .................54
Axle
lubricant specifications ..........259
traction lok ..............................155
B
Battery .......................................232
acid, treating emergencies .....232
jumping a disabled battery ....189
maintenance-free ....................232
servicing ..................................232Belt-Minder...............................82
Booster seats ...............................95
Brakes ........................................151
anti-lock ...........................151–152
anti-lock brake system (ABS)
warning light ...........................153
fluid, checking and adding ....252
fluid, specifications .................259
lubricant specifications ..........259
parking ....................................153
shift interlock ..........................156
Break-in period .............................5
Bulbs ............................................46
C
Cargo cage ...................................60
Cell phone warning ...................267
Changing a tire .........................179
Child safety restraints ................95
child seat belts .........................95
Child safety seats ........................99
attaching with tether straps ..102
in front seat ............................100
in rear seat ..............................100
tether anchorage hardware ...102
Child safety seats - booster
seats .............................................95
Chimes (warning) .......................17
Cleaning your vehicle
engine compartment ..............207
instrument panel ....................210
interior .....................................210
Mazda car care products .......211
plastic parts ............................209
washing ....................................206
waxing .....................................206
wheels ......................................207
2008 B-Series(mbs)
Owners Guide (post-2002-fmt)
USA(fus)
Index
268