2008 MAZDA MODEL B-SERIES spare tire

[x] Cancel search: spare tire

Page 124 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) TIRE PRESSURE MONITORING SYSTEM (TPMS)
Each tire, including the spare (if
provided), should be checked
monthly when cold and inflated to
the inflation pressure recommended
by the vehicle manufacturer

Page 126 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) When your temporary spare tire is installed
When one of your road tires needs to be replaced with the temporary
spare, the TPMS system will continue to identify an issue to remind you
that the damaged

Page 127 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) Low Tire Pressure
Warning LightPossible cause Customer Action Required
Solid Warning Light Tire(s)
under-inflated1. Check your tire pressure to
ensure tires are properly
inflated; refer toInflating
yo

Page 128 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) Low Tire Pressure
Warning LightPossible cause Customer Action Required
Flashing Warning
LightSpare tire in use Your temporary spare tire is in
use. Repair the damaged road
wheel and re-mount it on the

Page 179 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) Fuse/Relay
LocationFuse Amp
RatingPower Distribution Box
Description
43 20A* A/C relay coil, Engine sensors, VMV
solenoid, EGR solenoid, Heated
PCV
44 15A* Ignition coil, Capacitor
45A — Not used
45

Page 180 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) WARNING: The use of tire sealants may damage your Tire
Pressure Monitoring System and should not be used.
WARNING: Refer toTire Pressure Monitoring System (TPMS)
in theTires, Wheels and Loadingchapter

Page 181 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) Use of one of the dissimilar spare tires listed above at any one wheel
location can lead to impairment of the following:
•Handling, stability and braking performance
•Comfort and noise
•Ground c

Page 182 of 272

MAZDA MODEL B-SERIES 2008  Owners Manual (in English) Stopping and securing the vehicle
1. Park on a level surface, activate
hazard flashers and place
gearshift lever in P (Park)
(automatic transmission) or 1
(First) (manual transmission).
2. Set the par
Page:   < prev 1-8 9-16 17-24 next >