DRIVER CONTROLS
Always check the Owner’s Manual for more operating information and safety features
Driver
Controls
Switches
12
= Fog lights on: Rotate knob
(2); functions only with headlight
low beams on
Turn signals right/left: Move lever
up/down.
Tip: Headlights switch off auto-
matically within 30 seconds if
lights are left on and switch is
in lock position or key removed.
Wiper/washer control lever
Intermittent wiper: One click down.
To change interval speed:
Rotate inner ring (3).
Normal wiper speed: Two
clicks down.
Fast wiper speed: Three
clicks down.
Single wipe: Push stalk up.
Washer: Pull stalk back.
Rear window wiper/washer
(5-Door)
To activate rear interval wiper:
Rotate knob (4) up to INT.
To activate rear normal speed
wiper: Rotate knob (4) up to ON.
To activate rear washer with
wipers operating: Rotate knob
(4) up to ; hold knob (4)
to continue washing; release
knob and wipers will continue
to operate.
To operate stand alone wipe/
wash function: Rotate knob
(4) down and hold, release
to stop.
Front window switches
One-touch down/up: Press/pull
AUTO switch (3) firmly and
release, window goes down/up
all the way, press/pull briefly
to stop, press/pull lightly and
hold for normal operation.
Tip: During closing window
operation, window will stop
and open partway if object
blocks window operation.
Rear window switches
Push/pull (4) to open/close.
Power window lockout switch
Press button (5), only driver's
window operates; press again
for normal operation.
Power window
initialization procedure
If battery is disconnected or power
window fuse is replaced, the auto
open/close and anti-pinch features
will not function.Resetting procedure:
1. Turn ignition switch
to “ON” position.
2. Make sure that power
window lock switch located
on driver’s door is not
depressed.
3. Press switch and fully open
power window.
4. Pull up switch to fully close
power window and continue
holding switch for about
2 seconds after window
fully closes.
5. Repeat steps 3- 4 for front
passenger power window
while seated in front
passenger seat.
6. Make sure power windows
operate correctly using
door switches.
Dual power
mirrors
Ignition switch
must be in ACC
or ON position.
Switch is on
driver’s door.
To adjust left/right mirror:
Press selector switch (1) left/
right, press switch (2) in direction
of desired movement.
Tip: To lock mirrors in place,
move selector switch (1) to
center position.
Power window
switches
With ignition ON.
All windows
controlled from
driver’s armrest;
passenger doors
have separate
switches.
Turn signal/lighting
control lever
OFF= Lights off
= Tail, parking and
dashboard lights on: Rotate
knob (1) to first notch
= Tail, parking, dashboard
and headlights on: Rotate knob
(1) to second notch
High beams on/off: Push lever
forward/pull back to detent.
To flash high beams: Pull lever
back slightly and release.
34
R
E
A
R
543
AU
TOA
U
TO
LR
2
1
